logo

Refrigeration Anti-Vibration Corrugated Tube

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Anti-Vibration Corrugated Tube

Refrigeration Anti-Vibration Corrugated Tube

Refrigeration anti-Vibration Corrugated Tube

INTRODUCTION:

Tube is made from #304 stainless steel ,and with brass nuts.

1,Refrigeration Vibration Corrugated Tube can greatly reduce vibration and noise frpm refrigerant pipeline system, It can fundamentally solve all kinds of pipe interface displacement, axial stretching and misalignment problems.

2 Different materials can be made according to acid, alkali resistant, corrosion, oil, heat and other kinds of species ,it adapts to a variety of media and the environment.

3 Sealing, light weight, easy installation and maintenance, long life, but pls avoid contact with sharp metal instruments, so as not to pierce the sphere.

4, If overhead ,it can be equipped with elastic supports, installation of bolts to use diagonal method.

5 If the line pressure is too high, the application of extreme ends of the flange bolts together.

6 Flange connection standard used GB4216.3-4216.5 standard, as with other standards, can be explained.

 

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping. Each vibration absorber is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. The absorbers are cleaned, dehydrated, sealed in plastic wrap and individually boxed after final inspection to maintain cleanliness and dryness prior to installation.

 

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Anti-Vibration Corrugated Tube

One Inquiry to Refrigeration Anti-Vibration Corrugated Tube

  1. I HAVE A CENTRAL AIR UNIT ON MY HOUSE THAT HAS A 5/8″ ID CORREGATED STEEL TUBING THAT IS USED FOR THE LINE SET GOING FROM THE CONDENSER TO THE EVAPORATOR. THE LINE SPRUNG A LEAK AT THE CRIMPED FITTING. DO YOU GUYS OFFER A REPAIR FITTING SO I CAN REPAIR THIS? I WOULD NEED A FITTING THAT WOULD CONNECT TO THE CORREGATED LINE AND CONVERT OVER TO COPPER TUBE. MY HVAC REPAIR MAN HAS NEVER SEEN THIS TYPE OF LINE AND THEY CAN NOT FIX IT SO THEY WANT TO SELL ME A NEW LINE SET. PLEASE LET ME KNOW ASAP IF YOU HAVE ANYTHING THAT WOULD HELP ME OUT. THANKS.

Leave a Reply

Your email address will not be published. Required fields are marked *