Brazing rod to join pieces of metal type
HVAC Parts >>Refrigerating Parts & Heating Elements>>Welding materials and Welding tools>>Brazing rod
Brazing Rod
Brazing rod is low fuming bronze alloy for torch brazing. Ideal for maintenance, repair and fabrication applications, Steel, Copper and copper alloy, Nickel & nickel alloy. Brazing rod has good wettability, high strength and toughness of toughness of brazing seam and lower melting point. The heating speed should be as quick as possible while brazing.The joint is to be bright grey and will reture to the original color of bronze into 10% sulphuric acid. used for fusion welding materials of similar composition, copper alloys (brass) and for TIG brazing steels. It is also suitable for surfacing steel and dissimilar metal applications.
Product Information:MIG: 0.8mm 1.0mm 1.2mm 1.6mm 15kg spool Ring Available
TIG: 2.0mm 2.4mm 3.0mm 3.2mm 4.0mm 5.0mm 5kg polybag 10kg polybag,More……
—-Phosphorus Copper Brazing Rod
Product Information:
Flat rods: 0.05″x1/8″x18″
Square rods: 1/8″x1/8″x18″
Round rods:2.0mm 2.4mm 3.0mm 3.2mm 4.0mm
Ring Available,More……
Product Information:
Flat rods: 0.05″x1/8″x18″
Square rods: 1/8″x1/8″x18″
Round rods:2.0mm 2.4mm 3.0mm 3.2mm 4.0mm
Ring Available,More……
Product Information:
MIG: 0.8mm 1.0mm 1.2mm 1.6mm 5kg/12.5kg/15kg spool
Flux Coated Rods Available
TIG: 2.0mm 2.4mm 3.0mm 3.2mm 4.0mm 5.0mm 5kg/10kg polybag,More……
—-Silver Copper Welding Rod Material
Product Information:
MIG: 0.8mm 1.0mm 1.2mm 1.6mm 5kg/12.5kg/15kg spool
TIG: 2.0mm 2.4mm 3.0mm 3.2mm 4.0mm 5.0mm 5kg/10kg polybag,More……
- Brazing – Dual purpose brazing rod
- Flux-coated brazing rod eliminates the need for additional fluxes
- High strength characteristics makes it ideal for brazing steel, copper, and bronze
- For use with an Oxy-Fuel torch only
- Ideal for sheet metal
- For use on wheelbarrows, lawn mowers, gear teeth, auto body repair, and pipe wrenches,More……
Brazing Rod Built-in Flux,flux-cored Brazing wire,Low-temperature Soldering Material,More……
Brazing rods are used in brazing, a type of welding that uses acetylene to join metal pieces together. Brazing is typically used when joining pieces of the same metal type, such as steel to steel or copper to copper. Brazing rods are pieces of metal that melt during the welding process and attach to the separate pieces of metal to join them together once cooled.Finally, brazing rods can also be categorized on the basis of whether or not they are covered in flux. Flux is a sort of cleaning material that prepares the metal for joining. Bare brazing rods must have flux added to them or have the flux brushed directly onto the welding materials. Flux-coated brazing rods, on the other hand, are already covered in flux and do not generally require additional flux to be added. Once welded, any remaining flux must be removed from the welded metal to prevent corrosion.
HVAC Parts >>Refrigerating Parts & Heating Elements>>Welding materials and Welding tools>>Brazing rod
Enquiry or Reviews
0
/5Based on 0 rating(s)
5 Star
4 Star
3 Star
2 Star
1 Star
0 Star
Reviewed by 01 customer(s)
Richard St. Aubin
I am the Commodity Manager responsible for exhaust parts used in our lawn and garden products – like chain saws, trimmers, and blowers. One of the products we use are brazed mufflers. As you are a brazing products manufacturer you may know of some of your customers using your product to produce brazed exhaust mufflers. If so I would very much appreciate a referral or introduction to one or more of your customers who may be interested in working with Husqvarna Group.
I can be reach at the email address within this inquiry. I hope to hear from you soon.
Regards
2014-01-24Reply
Write enquiry message or review