YDK-40-6C 1 H3 motor for air condenser condenser

Basic Specifications

Model: YDK-40-6C 1H3

Rated power: 40W, Rated current: 0.43A

Operating voltage: 208~230V / 60Hz, 6-pole single-phase asynchronous motor, equipped with a matched 3μF/450V starting capacitor.

Physical Dimension Details

1. Shaft: Shaft diameter = 8mm; smooth exposed shaft segment length = 25mm, front thread section = 11mm; overall protruding shaft length from motor casing top = 80mm.
2. Motor Housing: Outer diameter of the motor shell = 97mm; total vertical height of the motor unit = 155mm; mounting hole center-to-center spacing = 90mm, mounting bore diameter = 5mm for fixed installation.
3. Cable & Wiring: Total wire length reaches 110cm, with multi-color lead wires (Red/Yellow/Blue/White/Orange) terminated with a white plastic connector plug.
   • Wire code definition per internal schematic: RD(Red), YW(Yellow), BL(Blue), WH(White), OR(Orange); the orange lead connects externally to the 3μF 450V run capacitor.

Structure & Application

It is an enclosed steel shell single-phase condenser fan motor, clockwise rotation marked by arrow on nameplate, commonly used for air conditioner outdoor unit, heat pump or HVAC blower cooling fan assemblies.