Usually,we`ll suggest the buyer can buy water cylinderand and connecting copper pipe from his local market.Because,different customer has different requirement on water cylinder,and also because,if you want to export the cylinder,China custom will ask for a Pressure Certificate,but the cylinder factory couldn`t provide this certificate;Also,in some countries,if you want to import the cylinder,some certificate must be provided depending on different country`s policy.That`s why we`ll suggest you to buy water cylinder from his local market.
If you need Smartclima provide water cylinder,pls let us know.
Then,what kind of water cylinder do you need for Smartclima`s thermynamic panel system?Our answer is that most of (almost 99%) water cylinder used for air source to water system can work well with our thermodynamic system.Even if you don`t know water cylinder used for air source to water system,you also can refer to the following instruction:
Essential holes are: Hole to insert temperature sensor head; Hole for refrigerant in and Hole for refrigerant out; Hole for cold in and Hole for hot water out.
We suggest to use stainless steel coil inside.
If you need Smartclima to provide water cylinder,pls let us know.(We have model 100L,150L,200L,260L,300L,400L,500L)
Type
Hot water outlet
Hole for temperature sensor head
Refrigerant inlet
inlet connector(mm)
Refrigerant outlet
outlet connector(mm)
100L
G1/2″
G1/2″
G1/2″
6.35
G1/2″
9.52
150L
G1/2″
G1/2″
G1/2″
6.35
G1/2″
9.52
200L
G1/2″
G1/2″
G1/2″
6.35
G1/2″
9.52
260L
G1/2″
G1/2″
G1/2″
6.35
G1/2″
9.52
320L
G1/2″
G1/2″
G1/2″
6.35
G1/2″
9.52
400L
G3/4″
G1/2″
G3/4″
9.52
G3/4″
12.7
500L
G3/4″
G1/2″
G3/4″
9.52
G3/4″
12.7
Type
Could water inlet
Hole for Drain dirty
Hole for magnesium bar
Coil in the cylinder
Dia. X Thickness (mm) Length (m)
100L
G1/2″
G1/2″
G1/2″
9.52*1.0
18m
150L
G1/2″
G1/2″
G1/2″
9.52*1.0
20m
200L
G1/2″
G1/2″
G1/2″
9.52*1.0
22m
260L
G1/2″
G1/2″
G1/2″
9.52*1.0
24m
320L
G1/2″
G1/2″
G1/2″
9.52*1.0
28m
400L
G3/4″
G1/2″
G1/2″
12.7*1.0
25m
500L
G3/4″
G1/2″
G1/2″
12.7*1.0
30m
Notice: Above cylinder is only for reference.We don`t require 100% same as it. Smartclima`s thermodynamic solar system can be used with different cylinder,just similar with above only.Usually,we recommend Stainless Steel Coil inside because our system`s refrigerant is R410a,which has high pressure.
In above photo,”Hole 5″ need to be 3/8″ and “Hole 4 need to be 1/4″,because Smartclima`s heat block is with 1/4″ and 3/8” connector. “Hole 3” need to be 7mm as inner diameter,as Smartclima`s temprature probe is in 6mm diameter. Other hole size can depends on your favourite.
Write enquiry message or review