Models & Details for “ThermoElectric module thermostat ”
Temperature range: -50-110 ℃ Resolution: 0.1 ℃ Temperature accuracy: 0.1 ℃ Control accuracy: 0.1 ℃ Control mode: stepping control Refresh rate: 4times/s Input Power: DC12V Output: Max. 12V 15A 180W Self-power consumption:static state current <120MA/1.5W Temp. sensor: 0.5m Waterproof sensor (10KB 3950) Output: 1 channel +/- switching and 1 channel heating and 1 channel cooling Environmental requirements: -20 ~ 65 ℃ Humidity <80% Size: 78 * 53*26mm Screen: PV34*19mm,SV23*10mm
Features: Automatically switch +/- to excute switch heating and cooling; Three working mode: auto,heating,cooling; The heating and cooling has its own auxuliary relay; Double screen to show detected temperature and set temperature; Output has IO extension socket,it can control out-built board;
Power supply: +12V and GND Connect ThermoElectric Module Big power extension output IC Socket Temp. Sensor socket +/- switching relay +/- switching relay Chip controlling CPU Auxiliary heating output relay Auxiliary cooling output relay Heating output switch socket Cooling output switch socket
TEC working procedures: Suppose that set temp. 25℃,temp return difference 0.5℃,that means 24.5-25.5℃ is ranged temp. ,when the detected temp. is in the range 24.5-25.5℃,not start heating or cooling,that is saying there is no any electric on the output,and TEC doesn`t work at this stage. When temp. is lower than 24.5℃,starting heating mode,output reversing voltage with left “-” and right “+” supply power to ThermoElectric module,to let thermoelecric module work for heating state,at this time, H relay close for starting auxiliary element for heating; When temp. is higher than 25.5℃,starting cooling mode,output forward direction voltage with left “+” and right “-” supply power to ThermoElectric module,to let thermoelecric module work for cooling state,at this time, C relay close for starting auxiliary element for cooling;
Code
Indicating
Set range
Inital Setting
P1
working mode
A/H/C
A
P2
temp return difference
-0.1-15
-2
P3
Temp. adjust
-10~10℃
0
P4
Prolong time
0-300s
0
P5
High temp.alarm
-45 to 110℃
off
P6
Low temp.alarm
-50 to 105℃
off
Buying Guide to “ThermoElectric module thermostat”
The ThermoElectric module thermostat is available for retail and wholesale;
Accept customized bulk production,putting your logo;
The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
Accept bulk order with Container delivery;
Please contact us to email: hvac@smartclima.com ,we can supply a favourite item you need.
Send us your enquiry message or review.You also can write email to us: sale@smartclima.com or info@smartclima.com . Smartclima team will reply you within 24 hours.
Enquiry or Review on “ThermoElectric module thermostat Model XH-W1504,automaticly switch heating and cooling” Cancel reply
Enquiry or Review on “ThermoElectric module thermostat Model XH-W1504,automaticly switch heating and cooling”