logo

Thermo fogger disinfection equipment,thermal fog spraying machine

Thermo fogger disinfection equipment,thermal fog spraying machine 1

Thermo fogger disinfection equipment,thermal fog spraying machine

Thermal fog machine is suitable for the prevention and control of crop diseases and insect pests, sanitation and disinfection of hospitals, conference rooms, theaters, stadiums, wharves, stations, buses, passenger trains, urban sewers and heating channels, basements, air raids and various cargo warehouses. deal with.
Main feature:
1. The diameter of the mist particles generated by the fog machine is very small, and the mist particles of the pesticide are small, and the prevention and treatment effect is good. Various experiments have proved that the penetration of smoke can be described as permeable, and can kill the pests in the dense crowns and even the cracks of the bark.
2. The smoke for particle size is small, the fog particle number is also large. Experiments show that the greater the number of mist particles per unit area, the better the prevention and control effect. A large number of mist particles are diffused in the space and distributed evenly, which greatly increases the chance of contact with pathogens and pests, which is beneficial to improve the control effect. This advantage is significant when it is controlled in a room (shed).
3. The smoke fog particles are small and have multi-directional deposition characteristics. It is favorable for the fog particles to deposit on the front and back sides of the branches and leaves and in all directions of the insect body, and the deposition rate is higher on small targets, such as the antennae and hair of insects. One of the reasons for good insect pest effect.
4. The smoke fog diffuses and spreads in the space and is suspended, which is particularly effective for killing aerosol viruses. The virus spreads through the air, and a large amount of suspended smoke easily meets the virus, which can inhibit the formation of the virus and make it lose its ability to infect and reproduce, so as to obtain a good control effect.
5. The smoke fog particles are small, plus oil, anti-rainwater washout, lasting effect, good control effect, and rainy weather has little effect on the sprayed smoke.

Place of origin: Supplied by China Manfacturer, Made in China, export to worldwide.

Order or Inquiry on “Thermo fogger disinfection equipment,thermal fog spraying machine”

 

Models & Details for “Thermo fogger disinfection equipment,thermal fog spraying machine”

Thermo fogger disinfection equipment,thermal fog spraying machine 3

MODEL 110A

Thermo fogger disinfection equipment,thermal fog spraying machine 5

model
110A
Net weight (kg)
10.2+1.6
Dimensions (mm)
1210*270*345
Medicine box volume
16L
Fuel tank capacity
2L
Machine form
Double-tube double-carburetor
Start method
Manual / electric, can be customized
Fuel
Regular or above ((Plus or Premium) clean gasoline
battery voltage
12v
Executive Standard
GB10395.6-2006  LY/T1196 1-2004  GB10395.1-2009
Fuel consumption
<2.5L
Maximum spray volume
90L/h

 

MODEL 320

Thermo fogger disinfection equipment,thermal fog spraying machine 7

model
320
Net weight (kg)
9.5 + 1.6
Dimensions (mm)
1165 * 210 * 310
Medicine box volume
14L
Fuel tank capacity
1.6L
Machine form
Double-tube double-carburetor
Start method
Manual / electric, can be customized
Fuel
Regular or above ((Plus or Premium) clean gasoline
battery voltage
12v
Executive Standard
GB10395.6-2006 LY / T1196 1-2004 GB10395.1-2009
Fuel consumption
<2.5L
Maximum spray volume
90L / h

 

MODEL 310

Thermo fogger disinfection equipment,thermal fog spraying machine 9

model
310
Net weight (kg)
7.8 + 1.6
Dimensions (mm)
1090 * 180 * 310
Medicine box volume
12L
Fuel tank capacity
1.6L
Machine form
Double-tube double-carburetor
Start method
Manual / electric, can be customized
Fuel
Regular or above ((Plus or Premium) clean gasoline
battery voltage
12v
Executive Standard
GB10395.6-2006 LY / T1196 1-2004 GB10395.1-2009
Fuel consumption
<2.5L
Maximum spray volume
90L / h

MODEL 310K

Thermo fogger disinfection equipment,thermal fog spraying machine 11

model
310K
Net weight (kg)
8.5 + 1.6
Dimensions (mm)
1090 * 180 * 310
Medicine box volume
12L
Fuel tank capacity
1.6L
Machine form
Double-tube double-carburetor
Start method
Manual / electric, can be customized
Fuel
 Regular or above ((Plus or Premium) clean gasoline
battery voltage
12v
Executive Standard
GB10395.6-2006 LY / T1196 1-2004 GB10395.1-2009
Fuel consumption
<2.5L
Maximum spray volume
90L / h

 

Notice: Because international transport company doesn`t permit to delivery goods with battery.And therefore,we encourage our customer to purchase battery in his local market to use this machine.Smartclima provide the machine without battery. The battery which can be used as following:

Thermo fogger disinfection equipment,thermal fog spraying machine 13

How to purchase “Thermo fogger disinfection equipment,thermal fog spraying machine ”

  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email:  [email protected]

General knowledge to use thermo fog machine

Explain for performance:

Thermo fogger disinfection equipment,thermal fog spraying machine 15

The machine machine is dual-use,can spray liquid mist and smog mist.The below article explain the difference of liquid mist and smog mist.

Capacity:

If want to spray liquid mist: 16L liquid in a barrel can be used for about 660㎡ area disinfection in 10 minutes.
If want to spray smog mist: 16L liquid in barrel can be used for about 8000㎡ area disinfection in 30 minutes, so you need to put disinfectant in the barrel, then put in 1-3kg of diesel or aerosol to mix.
The difference between water mist and smog mist:
If want to spray liquid mist only, just put the  disinfectant into both tanks (water tank and medicine tank).
If you want to spray smog mist, you need to separately put disinfectant(into medicine tank) and diesel(into water tank) .Mixed disinfectant with aerosol or diesel is the base to produce smog mist.
How to use the machine:
1. Put fresh water into the medicine box and test the machine first. After putting the water into the medicine box, the lid of the medicine box must be tightened.
2. Put “Regular or above ((Plus or Premium) clean gasoline” in the oil tank.
3. Both the blue carburetor of the machine are turned on, turn both to the “open” position
4. There are two oil bubbles on the back of the carburetor,press each oil bubble down about 10 times to suck the oil above to be the position of two thirds.
5. Before start, press the carburetor oil bubble, and then press the electric start button for more than 5 seconds.
6. After starting, open the two liquid medicine valves.
7. When shutting down, be sure to close the liquid valve first, and then turn off the carburetor.

Main points to operate the backpack-type thermo fog machine

  Thermo fogger machine (Disinfectant mist diffuser machine) is a kind of high-efficiency, multi-purpose plant protection machinery, which can perform mist spray, powder spraying, dusting, smoke spraying, fire spraying, ultra-low volume spraying and other operations. It is suitable for the prevention and control of pests and diseases of agricultural and forestry crops, weeding, sanitation and epidemic prevention, eradication of storage pests, spraying of granular fertilizers and spraying and seeding of small seeds. It has the characteristics of compact structure, small volume, light weight, multi-use in one machine, high range, uniform spraying, convenient operation and so on. The operation points are as follows:
  1. Before working, check whether the connecting parts, sealing parts and switch control are proper to prevent loosening and leakage.
  2. Fully prepare the wearing parts to ensure the normal operation of the machine and improve the reliability.
  3. Strictly follow the required mixing ratio and type of lubricating oil, pay attention to the uniformity of mixing, so as to avoid poor lubrication and cause early wear and failure of the machine parts.
  4. The drugs and powders used should be dried and sieved, and the liquid should be filtered to prevent clogging debris from blocking the switch, pipeline or nozzle.
  5. Before adding the drug, the switch for controlling the drug should be closed; after adding the drug, the lid of the medicine box should be tightened.
  6. During the operation, first raise the throttle control handle of the gasoline engine to the position of the required speed. After a stable operation, you can turn on the control drug switch for spraying; when the spraying is stopped, first turn off the drug switch and then close the gasoline engine throttle.
  7. Under normal circumstances, it is allowed to add medicine without stopping, but the gasoline engine should be at a low speed, and pay attention not to let the medicine overflow, so as not to wet the engine, magneto and fan casing, and corrode the body.
  8. The mist used in the misting operation has a large concentration, and the sprayed dots are fine and dense. When the handle switch is turned on, the spray pipe should be swung left and right to evenly spray, and it must not be stopped at one place to prevent chemical damage. For ultra-low volume spray operations, specific technical requirements should be followed.
  9. When spraying higher crops, the speed can be higher, but try to avoid the engine running continuously at high speed for a long time.
  10. Pay attention to the wind direction for safe operation. When spraying toxic pesticides, protective equipment must be equipped. The working hours of each person should not be too long, and the back machine should be rotated properly to ensure personal safety.
  11. After working every day, the medicine box, pipelines and switch components should be cleaned in time, and the oil and dust on the surface of the machine should be cleaned to check whether each part of the screw is loose and missing. At the same time, maintain the gasoline engine according to the gasoline engine maintenance regulations.

Leave a Reply

Your email address will not be published. Required fields are marked *