logo

Tag: air duct cleaning equipments

Air Conditioner Accessory Washing Basin

Air Conditioner Accessory Washing Basin 1

air-conditioner-accessory-washing-basin

Item: Air Conditioner Accessory Washing Basin

Short Description: Air Conditioner Parts Washing and Cleaning Basin,foldable washing buck for air conditioner   external parts cleaning. It is made from waterproof PVC material,can be used again and again.Good standing and easy to load and off-load the water.Big size to let you have a good and convenient cleaning experience.It is fortable and portable,very easy to take and quik-spread and quick-fold.Can wash and clean air conditioner plastic parts,filter,air grille,air diffuser,etc.

Size/Dimension: Dia80cm X High 30cm

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Accessory Washing Basin
Models & Details for “Air Conditioner Accessory Washing Basin”

air-conditioner-accessory-washing-basin air-conditioner-parts-cleaning-basin foldable-washing-bucket washing-basin-for-the-external-parts-of-the-air-con portable-bucket-for-washing

Buying guide to “Air Conditioner Accessory Washing Basin ”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning

Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning 3

air conditioner cleaning,washing,maintenance and comfort improvementAC-High-Pressure-Cleaning-1Sterilizing-machine-01Cleaning-sterilizing-01AC-High-temp-Cleaning-1all-in-one-banner-1Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning 5AC-washing-bag-1dust-cleaning-and-suction-label-1air-speed-and-temperature-label-1interior-inspector-label-1air-filter-label-1auxiliary-kit-banner-1Robot-Cleaning-banner-1Rotary-brush-Cleaning-banner-1Shaft-Cleaning-banner-1Duct-Sterilizing-banner-1ozone-sterilizing-label-1Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning 7
HVAC Parts >>Air Conditioner Spare Parts>>Materials for Air Conditioner Cleaning and Maintenance>>Air Conditioner Cleaning Machines And Tools>>Duct Air Conditioner Cleaning Machines and Tools>>Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning

Air Conditioner Interior Inspector

Item: Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning

Short Description: It`s a pity if you couldn`t check air conditioner interior situation: the user couldn`t find the bad situation before cleaning and couldn`t find the good result after cleaning,and thus they couldn`t compare the difference before and after…Now,with this tool,the pity will be come over.The probe can be push into the deep of air duct,check situation in the screen,anything is clear.Right? Really is a good partner for your air conditioner maintenance  service.

Features: Powered by DC battery;2.7″ screen; Dia.8mm probe;LED light;Hand taking;

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning 
Models and Details on “Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning “

Technical Parameters:

  • 2.7″ screen;
  • Dia.8mm probe & pipe;
  • Wire length:3meter;
  • Photo on the screen can be rotary and enlarged;
  • With LED light;
  • Probe and pipe are water-proof;
  • Hand-held type;
  • Portable.

Application :
This product is widely used for inspect or monitor the interior of coil for air conditioner.

Inspecting-air-conditioner- Interior-inspector-result

Buying guide to “Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning ”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

HVAC Parts >>Air Conditioner Spare Parts>>Materials for Air Conditioner Cleaning and Maintenance>>Air Conditioner Cleaning Machines And Tools>>Duct Air Conditioner Cleaning Machines and Tools>>Aircon Coil Monitor,Interior Monitor For Air Conditioner Duct Cleaning

Flexible Shaft Condenser Chiller Tube Cleaning Machine

Flexible Shaft Condenser Chiller Tube Cleaning Machine 9

Flexible Shaft Condenser Chiller Tube Cleaning Machine 11

Item: Flexible Shaft Duct and Chiller Tube Cleaning Machine

Short Description:Chiller and heat exchanger efficiency is affected more by the cleanliness of heat transfer surfaces than any other single factor. Given the fact that a chiller typically can have several miles of tubing making up the condenser and evaporator, it makes sense to keep chiller tubes as clean as possible by using a combination of water treatment and planned outages for tube cleaning and other major maintenance tasks. As contaminants accumulate on chiller tube surfaces, efficiency declines rapidly. Contaminants can range from mud, sand and algae to hard mineral scales, which increase thermal resistance and cause the chiller to work harder to meet demand, thereby consuming more energy.The following method is to utilize electric motor, to rotate a flexible shaft. It is encased in a plastic casing that transports water to the cleaning tool. Chiller tube cleaning tools range from a variety of brushes to buffing tools, hones and scraper tools. They are capable of cleaning almost all types of deposits, including hard scale. The operator simply feeds the flexible shaft through the tubes to brush and flush in one operation.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Flexible Shaft Condenser Chiller Tube Cleaning Machine
 Type A1–Easy-taking & Single system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type A1: Type of easy-taking with single system,not heavy and easy to take.

Flexible Shaft Condenser Chiller Tube Cleaning Machine 13 Chiller-Cleaning-Equipment-type-A1-single-system
Optional parts: 
Flexible shaft: dia.6mm, dia.8mm,dia.10mm,dia.12mm  (long 15meters).
Brush: dia.8mm,10mm,12mm,14mm,16mm,19.1mm,20.6mm,22.2mm,25.4mm,30mm,with m6 thread.

Flexible Shaft Condenser Chiller Tube Cleaning Machine 15 Flexible Shaft Condenser Chiller Tube Cleaning Machine 17 Flexible Shaft Condenser Chiller Tube Cleaning Machine 19 Flexible Shaft Condenser Chiller Tube Cleaning Machine 21 Flexible Shaft Condenser Chiller Tube Cleaning Machine 23 Flexible Shaft Condenser Chiller Tube Cleaning Machine 25

Type A1 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,375W;
Motor rotary speed: 0-1400r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:13kgs;
Type of  single working system.

 Type A2–Easy-taking & Dual system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type A2  ,easy-taking type with dual system(The second is  used as backup  system).

Flexible Shaft Condenser Chiller Tube Cleaning Machine 27Flexible Shaft Condenser Chiller Tube Cleaning Machine 29 heat-exchanger-Tube-Cleaning-equipment-type-A2-dual-systemFlexible Shaft Condenser Chiller Tube Cleaning Machine 31 Flexible Shaft Condenser Chiller Tube Cleaning Machine 33 Flexible Shaft Condenser Chiller Tube Cleaning Machine 35

Type A2 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,375W;
Motor rotary speed: 0-900r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:15kgs;
Type of dual working system.(The second system can help you to continue working once the first system happen problem).

 Type B1–Portable & Single system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type B1 Portable type with single system,with castors and pushable

Flexible Shaft Condenser Chiller Tube Cleaning Machine 37 Flexible Shaft Condenser Chiller Tube Cleaning Machine 39 Flexible Shaft Condenser Chiller Tube Cleaning Machine 41 Flexible Shaft Condenser Chiller Tube Cleaning Machine 43

Type B1 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,400W;
Motor rotary speed: 0-1400r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:26kgs;
Portable type.
Type of single working system.

 Type B2–Portable & dual system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type B2 with castors and pushable,Portable type with dual system(The second is  used as backup  system).

Flexible Shaft Condenser Chiller Tube Cleaning Machine 45 Flexible Shaft Condenser Chiller Tube Cleaning Machine 47 Flexible Shaft Condenser Chiller Tube Cleaning Machine 49 Flexible Shaft Condenser Chiller Tube Cleaning Machine 51

Type B2 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,400W;
Motor rotary speed: 0-900r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:26kgs;
Portable type.
Type of dual working system.(The second system can help you to continue working once the first system happen problem).

 Type C–Portable & Dual system,two systems can be working at the same time.

Type C–Portable & Dual system,two systems can be working at the same time,means improve working effience. It can clean the complete blocked tubes.

Flexible Shaft Condenser Chiller Tube Cleaning Machine 53 Flexible Shaft Condenser Chiller Tube Cleaning Machine 55 Flexible Shaft Condenser Chiller Tube Cleaning Machine 57 Flexible Shaft Condenser Chiller Tube Cleaning Machine 59 Flexible Shaft Condenser Chiller Tube Cleaning Machine 61Flexible Shaft Condenser Chiller Tube Cleaning Machine 21

Type C Features and Vantages:
With two working systems can work together,it can improve your working effience.
Equip with allory steel ahead,can through the completely blocked tube.
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,750W;
Motor rotary speed: 0-1400r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter,two pcs;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:40kgs;
Portable type.
Type of dual working system.(can work together).

Buying guide to “Flexible Shaft Condenser Chiller Tube Cleaning Machine”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]
 Maybe you are also interested “Rod and Brush for manually cleaning method”

Flexible Shaft Condenser Chiller Tube Cleaning Machine 65 Flexible Shaft Condenser Chiller Tube Cleaning Machine 67

About  “Flexible Shaft Condenser Chiller Tube Cleaning Machine”

Chiller tube cleaning equipments

These chiller tube cleaning devices utilize  motor to rotate a flexible shaft. It is encased in a plastic casing that transports water to the cleaning tool. Chiller tube cleaning tools range from a variety of brushes to buffing tools, hones and scraper tools. They are capable of cleaning almost all types of deposits, including hard scale. The operator simply feeds the flexible shaft through the tubes to brush and flush in one operation.

Advantages:

  • Affordable – initial outlay is minimal and the cost of consumables is reasonable
  • Simple to use – little training, or expertise, is required
  • Requires only one operator – reduces labor
  • Chiller tubes are left thoroughly cleaned – better heat transfer
  • Many models available – from simple, no-frills machines to more advanced units, incorporating mechanical shaft feed, bi-directional rotation and variable speed
  • Most effective method for cleaning newer chillers – that use internally enhanced tubes (more on this later)
  • Only one end of the chiller tube needs to be opened for cleaning

Portable duct cleaning device for small air duct

Portable duct cleaning device for small air duct 69

Portable duct cleaning device for small air duct

Item: Portable duct cleaning device for small air duct

Brief Description: Usually is used as small portable device(only 10kgs) to clean central air-conditioning duct, light weight, portable,easy to carry, easy to operate. Can be widely used in various types of small duct cleaning.

Main function: Cleaning small air duct.Can cope with duct type:Circular,Rectangle,Horizontal, Erect.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Portable duct cleaning device for small air duct

 

Models & Details for “Portable duct cleaning device for small air duct”

portable-duct-cleaning-equipment portable-duct-cleaning-machine

Features Technical Parameter Work For:
Usually is used as small portable device(only 10kgs) to clean central air-conditioning duct, light weight, portable,easy to carry, easy to operate. Can be widely used in various types of small duct cleaning. Work Voltage:AC 220V For height 100mm≤duct height≤350mm
Power:185W
Speed:10-1000RPM Duct Type Circular▇ Rectangle▇
Horizontal▇ Erect▇
Work Distance:≤20m
Weight:≤10KG Dust Type Non-explosion dust; Non-oily dust

Portable Flexible-Shaft Small Duct Cleaner

Buying Guide to “Portable duct cleaning device for small air duct”
  • The device is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight(by sea or by air) into the cost;
  • Accept bulk order with Container delivery;
  • Accept customized production;
  • More types duct detection devices,please contact us to email: [email protected] ,we can supply a favourite item you need.

Electric High Pressure Cleaning Device For Air Conditioner Washing

Electric High Pressure Cleaning Device For Air Conditioner Washing 71

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>>Electric High Pressure Cleaning Device For Air Conditioner Washing

Electric High Pressure Cleaning Device For Air Conditioner Washing

Item: Electric High Pressure Cleaning Device For Air Conditioner Washing

Voltage: 220v
Working pressure: 0.8Mpa
Frequency: 50Hz
Jet flow: 1-2ml / s
Working current: 0.4 ~ 0.6A
Capacity: 0.65L
Power: 45W
Net weight: 1KG

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Electric High Pressure Cleaning Device For Air Conditioner Washing
Models & Details for “Electric High Pressure Cleaning Device For Air Conditioner Washing”

Features:

Voltage: 220v
Working pressure: 0.8Mpa
Frequency: 50Hz
Jet flow: 1-2ml / s
Working current: 0.4 ~ 0.6A
Capacity: 0.65L
Power: 45W
Net weight: 1KG

1,It is an advanced and efficient air conditioner cleaning tools, noise, intensity, can be adjusted freely sprayed force;

2, Suitable for high pressure water jet cleaning effect is very good;

3,for air conditioner,computers, servers and other live cleaning operations;

4, The pressure generated by the motor, preventing traditional compression to produce water, moisture content to avoid leaving a short circuit;

5, a liquid having a certain compression capacity;

6, inside the chassis to quickly rinse all parts of the motherboard and chassis dirt;

7, improve work efficiency, and ensure job security;

Using Scope: Host and large servers or precision instrument care and maintenance cleaning inside the gap

Using the Operation
1, the liquid spray bottle filled with liquid. Connected to the 220V power supply, press the switch, the gun that is launched, there is a strong vibration and impact sound, a few seconds after the start of injection, and to work deep into the sound.
2, such as failed after starting work, then try adjusting the knob back, the method is: first knob and then slowly back into action in order to achieve a minimum sound pressure up to date. Hand at the test pressure from vents at 50cm, with strong hemp shock. (Note: after a good tune, usually do not just go and adjust)
3, decontamination effective distance between the nozzle and the object 10-15cm, by operating at 45 degree angle, to remove stains repeatedly until the jet.

Maintenance
A gun sustainable jobs, but also need to pay attention to moderate, to avoid overheating damage.
2, the sound normal but no injection, or injection, weakness, loose is the nozzle clogging, unscrew the nozzle, clean out debris, or from the inside out with a fine needle to gently twist through.
3, jet normal, but seem inadequate or unstable pressure, open the lid handle, check the pump tight wire gong is loose.
4, after the job is completed, the need to empty the spray for a few seconds, the liquid pump spray finish, and then into the lubricating oil drops from the hole and then empty spray a few seconds.
5, the gun belongs to the high-pressure shock gun, must not be on the human body spray. It should be placed in the reach of children

Buying Guide to “Electric High Pressure Cleaning Device For Air Conditioner Washing”
  • The device is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>>Electric High Pressure Cleaning Device For Air Conditioner Washing

Round Duct Cleaning Robot

Round Duct Cleaning Robot 73

Round Duct Cleaning Robot

Item: Round Duct Cleaning Robot,with Video function,for flat and small duct

Technical parameters and standard equipment:
Dimensions: 350 mm (length) × 170 mm (width) × 100 mm (height)
Weight: 5 Kg
Voltage: DC24V Power: 135W
Job Travel: standard with 20 meters, can be arbitrarily extended to 100 meters according to the requirements.
Cleaning pipes and material types: rectangular, circular pipes, pipes made of metal and composite materials
Cleaning Range: Height 100mm– 400mm width limitation, diameter Φ500mm and above

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Round Duct Cleaning Robot
Models & Details for “Round Duct Cleaning Robot”

Round Duct Cleaning Robot

 

The robot contains two color front and rear cameras (and with bright lighting) can automatically lift the rotating brush. With gearing (caterpillar), while walking in the duct pipe around for many years acted as a lookout while rotating balance the various dust and sorbate thoroughly play loose, the other end of the duct synchronized by a dedicated vacuum cleaner (dust suction method) . With video surveillance equipment in a timely manner and to observe whether the degree of cleaning requirements, and availability of duct inside the video store data any time and production standards MP4.

Technical parameters and standard equipment:
Dimensions: 350 mm (length) × 170 mm (width) × 100 mm (height)
Weight: 5 Kg
Voltage: DC24V Power: 135W
Job Travel: standard with 20 meters, can be arbitrarily extended to 100 meters according to the requirements.
Cleaning pipes and material types: rectangular, circular pipes, pipes made of metal and composite materials
Cleaning Range: Height 100mm– 400mm width limitation, diameter Φ500mm and above
Brush control: electric control point (maximum and minimum points are automatically adjustable limit)
Exercise: Dual Track Drive
Sports performance parameters: Obstacle> 45mm, climbing> 40 °
Travel speed: 0–12 m / min (stepless)
Camera and Lighting: Dual front line of industrial grade 620 IR color camera, front and rear lighting glare astigmatism type (low temperature and long life LED light source)


 

Air Duct Cleaning Robot Controller

Air Duct Cleaning Robot Controller GX-08-1

With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment

Technical Data
Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Weight:14Kg
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
Power: 150W
Standard: 
(1) 10.4′high-definition LCD,synchronous monitoring and recording system, Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2) Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
Optional:
(1) Four-wheel moving synchronous system of robot and the turning differential system.
(2) Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3) Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4) Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.

Buying Guide to “Round Duct Cleaning Robot”
  • The device is available for retail and wholesale;
  • The device can match different type brush to work for other type duct(rectangle).
  • The place of origin is in China,when you buy one or a small quantity,please consider freight(by sea or by air) into the cost;
  • Accept bulk order with Container delivery;
  • Accept customized production;
  • More types duct cleaning equipments,please contact us to email: [email protected] ,we can supply a favourite item you need.
General Knowledge on “Round Duct Cleaning Robot”

Duct Cleaning robot for circular pipe and rectangle duct

Duct Cleaning robot for circular pipe and rectangle duct 75

Duct Cleaning robot for circular pipe and rectangle duct

Item: Duct Cleaning robot for circular pipe and rectangle duct

Brief Description:  A unique revolutionary robot in the world which build function for cleaning circular duct and rectangle duct together into a same robot system.With this cleaning machine,you can use rotary brush to clean circular air pipes,and use scrolling brush or scrubing brush to clean rectangle type ventilation ducts,really to get two targets in one robot.The working platform height and cleaning arm can be adjusted-lifted or down(for cleaning duct height from 350mm to 1000mm).One controller+One Robot+Three types brushes,composing a best assistant to clean air ducts!

  • Solid and strong design, high cleaning efficiency;
  • Automatic lifting design,and automatic rotary design to control brush;
  • Lifting;descending;Forwarding;Backing;Left;Right;Automatically rotate brush with 360° freely.Throughly clean every side;
  • With a multi-size brushes for different diameter ducts;
  • With pro-long arm to suit for different height duct;
  • The latest high-definition infrared camera, clearer and more realistic;
  • The latest great-power cleaning motor, more powerful cleaning dirt capacity;
  • The latest great-power driving motor, more powerful to move and climb;
  • Adjustable robot traveling speed,mastering move speed;
  • Can attach the suction pipe of vacuum cleaner,suction dust while cleaning.
  • The brushed arm is motorised and controlled automatically to be up, down, left, right,high or low.Arm is 360° rotary 100% automatically(not manual). All are controlled 100% automatically,see below videos.

Duct Type: For Circular duct or Rectangle/square duct cleaning,height 350mm≤duct height≤1000mm.

Manufacturer: Smartclima.     Place of origin: China , Sell to worldwide.

Order or Inquiry on “Duct Cleaning robot for circular pipe and rectangle duct
Models & Details for “Duct Cleaning robot for circular pipe and rectangle duct”


Best features: A robot,can easily do with Circular duct and Rectangle/square duct together.

  • Solid and strong design, high cleaning efficiency;
  • Automatic lifting design,and automatic rotary design to control brush;
  • Lifting;descending;Forwarding;Backing;Left;Right;Automatically rotate brush with 360° freely.Throughly clean every side;
  • With a multi-size brushes for different diameter ducts;
  • With pro-long arm to suit for different height duct;
  • The latest high-definition infrared camera, clearer and more realistic;
  • The latest great-power cleaning motor, more powerful cleaning dirt capacity;
  • The latest great-power driving motor, more powerful to move;
  • Adjustable robot traveling speed,mastering move speed;
  • Latest type can attach the suction pipe of vacuum cleaner,can suct dust while cleaning.
  • The brushed arm is motorised and controlled automatically to be up, down, left, right,high or low.Arm is 360° rotary 100% automatically(not manual). All are controlled 100% automatically.

Air Duct Cleaning machine Robot with circular brush

Rotary Round brush to clean circular duct;

Scrubing brush to clean rectangle duct;

Scrolling brush to clean rectangle duct;

Technical Parameter Work for:
Cleaning Robot Portable Controller
Weight:17.6kg Cleaning Height:
350-1000mm
Weight:10kg Duct height 350mm≤duct height
≤1000mm
Dimension:400x300x300 Load Weight:≦150kg Dimension:460x340x160 Duct type Circular&Rectangle air duct
Power:70W Climbing capacity:≦40° Power:350W Dust type Non-Explosion dust;
Non-oily dust
Move Speed:
0-15m/min
Cleaning Effience:≦450 ㎡/h Walking long:30m Working Distance ≤60m (from both ends)
Accessories include:
Portable Robot Controller x1;
Robot x1; Robot Box x1;
Controller cord x30meters;
Power Cord x1.5meter;
Pro-long arm x2set;
Φ550mm circular/rotary brush x1;
Φ650mm circular/rotary brush x1;
Φ850mm circular/rotary brush x1;
Scrubing flat brush x1;
Scrolling brush x1;
SD card x1;
Inner hexagon spanner x1set;

Ventilation Duct Cleaning equipment accessory detailsRound Air Duct Robot Cleaning sampleCircular-Duct-Cleaning-effectRectangle duct cleaning effect

Latest model-The updated cleaning robot

The updated “Duct Cleaning robot for circular pipe and rectangle duct” is attached the part of dust suction connector (outer Φ38mm) for suction pipe of your vacuum cleaner.You can connect your vacuum cleaner pipe onto this connector,and the result is:when robot stepping and cleaning,the dust will be suctioned into the vacuum cleaner immediately.

cleaning robot attached dust suction part duct cleaning robot to connect vacuum cleaner pipecleaning robot kit with rotary brush duct cleaning robot with scrolling brush.jpg duct cleaning robot with cloth brush prolong brush to clean high ductspare parts for-cleaning-robot

Video on “Duct Cleaning robot for circular pipe and rectangle duct”

In this parts,we`ll show you the working video on “Duct Cleaning robot for circular pipe and rectangle duct”. The operation is very easy and simple,even a child can operate it easily.

Video on the robot with the dust suction attached part

The updated “Duct Cleaning robot for circular pipe and rectangle duct” is attached the part of dust suction connector for suction pipe of your vacuum cleaner.You can connect your vacuum cleaner pipe onto this connector,and you can get the targe of suction the dust whiling the robot cleaning the duct.

FAQ on “Duct Cleaning robot for circular pipe and rectangle duct”

Is the equipment portable? Is easy to take?
Yes,it is portable.At the bottom of robot box,it has four casters,easy to port;All brushes and accessories can be put into the box.

Should I download some software to run the robot?
No,You don`t need to download any software.Once you get the machine,don`t change anything,you can use it immediately.

What type duct can be cleaned with this robot?
It works not only for circular(round) ventilation pipe,but also for rectangle air duct.You just need to change the brush which is included in our package,and then it can clean different type ducts.In the world,we are the first one(and only one) supplier who can provide a same machine to clean circular pipe and rectangle duct together.

What size of air duct can be cleaned with this machine robot?
For cirular air pipe,Φ300mm to Φ1000mm;For rectangle duct or square duct,350mm≤duct height≤1000mm.

Is it easy to operate?
Yes,it`s very easy to use.After you get the equipment,with a half-day study at most, anyone can start cleaning work immediately.

Can the robot have a long-time working in continus?
In principle,yes,it can have a very long time working;But in order to prolong its service lifetime,we suggest to have a interval every 4 hours.

How many years can the robot woks?
En…It is a diffcult to answer,yes? It mainly depends on your using frenquency and how you operate it and maintenance. In normal operating,it is no problem with 10years.

Can I purchase accessories when it happens small breakdown,but we can repair it ourself?
Yes,of couse,just let us know which part you need,then we can provide.

Can I buy more brushs as backup?
Yes,you can.

What`s warranty for the system?
We provide warranty period : 1 year.In one year,if the system happens breakdown,after our company confirm that the breakdown is caused by quality of the equipment itself,we provide free repair.

How to maintenance the system?
You can use high-pressure air to blow the duct which is deposited in the robot after several use times;In order to prolong its service lifetime,it`s better to have a interval every 4 hours.

Buying Guide to “Duct Cleaning robot for circular pipe and rectangle duct”
  • The device is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight(by sea or by air) into the cost;
  • Accept bulk order with Container delivery;
  • Accept customized production;
  • More types duct cleaning equipments,please contact us to email: [email protected] ,we can supply a favourite item you need.

Cleaning solution for bus or subway vehicle air duct

Cleaning solution for bus or subway vehicle air duct 77

Cleaning-solution-for bus or subway vehicle air ductCleaning solution for bus or subway vehicle air duct

Bus air conditioning mode is generally through the vehicle two side of the duct to the interior of the car from the air conditioner in the top of the vehicle, by each outlet pipe of the cold air spread to every corner of the carriage, return the return air inlet is located in the middle or the rear vehicle (pipeline) returned to the air conditioning unit.
Because the vehicle the space is relatively small, so the wind pipe section sizes are small and are mostly flat and corners are right angle, so the vehicle air duct cleaning usually building air duct cleaning robot will not be able to use common, because the air duct cleaning robot relative volume more suitable for building large cross section the wind pipe.
According to the experience of bus air conditioning cleaning the selection of various types of models for many years “Brontosaurus” flexible machine (Tornado) equipment or air knife cleaning equipment is the most effective tool, truly effective cleaning the bus duct, there are a number of advantages.
(1) all types of “Brontosaurus” flexible machine (Tornado) equipment or air knife cleaning equipment has the advantages of small volume, can be smoothly into the wind pipe internal cleaning section 100mm*100mm or 50mm diameter.
(2) all types of “Brontosaurus” flexible machine (Tornado) equipment or air knife cleaning equipment due to its rotating shaft or the wind  onveying pipe is very soft, can be freely bent pipe, can be very smoothly through the right angle bend.
(3) because of the interior of the vehicle is narrow, a common “dust cleaning method” no enough space to display, and “Brontosaurus” flexible machine (Tornado) equipment or air knife cleaning device equipped with tornado device uses a “direct suction method” can effectively solve this problem.
(4) all types of “Brontosaurus” flexible machine (Tornado) equipment or air knife cleaning equipment with high efficiency without the wind pipe is provided any process hole, no damage to the wind pipe.

Suggested  equipments:

1, Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)  Or Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System) Or Air knife and vibration whip equipment

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System) Or Intelligent Flexible-Shaft Air Duct CleanerOr Wind knife and vibration whip air duct cleaner SMALL Wind knife and vibration whip air duct cleaner SMALL

2. 4000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma

 

Cleaning solution for factory air duct

Cleaning solution for factory air duct 79

Cleaning solution for factory air ductCleaning solution for factory air duct

With the progress and the processing time increases, more and more
industrial buildings with central air condition, due to the different factory
air conditioning process a variety of forms, can be divided into four
categories are introduced.

 

 

Cleaning standard workshop duct

Standard factory mainly such as mechanical processing, clothing shoes
and hats processing, assembly equipment, assembly line equipment, the
central air-conditioning duct forms and large shopping malls and
supermarkets are similar to central air conditioning, air duct cleaning solution and similar no longer tired.

Suggested the use of equipment:

1, Standard automatic cleaning robot  Or Large cleaning robot Or Duct Cleaning Robot For Circular Pipe And Rectangle Duct

Air-Duct-Cleaning-Robot-GX-08-4 Or  Large automatic cleaning robot+GX-08-1 Or 

2, Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)  Or Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System) Or Intelligent Flexible-Shaft Air Duct Cleaner

3. 4000 m³ /h Vacuum Dust Collector Bucket  or 8000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma Or  Dust-Collector-Bucket-2-sma

Cleaning lectronic factory duct

Electronic workshop for central air conditioning pipe form and standard workshop is similar, but can be quite different cleaning methods, the reason is the electronic workshop due process requirements, welding process widely used in manufacturing process, the process will produce a large number of containing solder paste (rosin) gas and precipitated in the duct wall, the solder paste (rosin) is flammable in air tube is extremelydangerous, solution past electronic plant is used in every half a year will wind tube removed for cleaning or replacement of the fresh air pipe direct cost is extremely high (materials and production cost). The way we use cleaning wind pipe can be an effective solution to this problem.
(1) the “Brontosaurus” four in one module in the robot “shovel robot” will be deposited in the bottom of the air pipe of the solder paste (rosin) shovel loose, then use the “Brontosaurus” four in one module in the robot “vacuum” is deposited on the bottom surface of the pine wind pipe (solder paste rosin) completely sucked.
(2) and then use the “Brontosaurus” standard cleaning robot or large cleaning robot for cleaning the wind pipe, the air pipe on the surface of the four residual solder paste (rosin) lay, and then use the “Brontosaurus” four cleaning robot in a modular robot will be precipitated in the wind tube of the rosin all away.

Suggested the use of equipment:
1,Shovel the robot and robot cleaner, four in one module robot;

dust-suction-robot-small  dust-shoveling-robot Air-Duct-Whipping-Robot small Air Duct Spraying and sterilizing robot small +  GX-08-1

2, Standard automatic cleaning robot  Or Large cleaning robot Or Duct Cleaning Robot For Circular Pipe And Rectangle Duct

Air-Duct-Cleaning-Robot-GX-08-4 Or  Large automatic cleaning robot+GX-08-1 Or 

3, Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)  Or Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System) Or Intelligent Flexible-Shaft Air Duct Cleaner

4. 4000 m³ /h Vacuum Dust Collector Bucket  or 8000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma Or  Dust-Collector-Bucket-2-sma

Cleaning food flour pharmaceutical factory

This type of plant of central air conditioning duct is extremely high,generally clean wind pipe, air duct dust residual quantity is less, and relatively dry, do not account for the wall is easy to clean, but after the cleaning effect is extremely demanding. In addition to the central air-conditioning duct cleaning, transportation of raw materials are often used in circular pipe pneumatic conveying production factories, the pipeline must be cleaned after each raw material replacement (pharmaceutical industry is more stringent).
(1) the clean wind pipe internal dust residual quantity is less, and relatively dry, do not account for the wall, can use “Brontosaurus” standard cleaning robots or four in one module robot “wind cutter robot” plus “Brontosaurus” 4000m3/h or 8000m3/h collector, and the use of “dust suction dust cleaning method” can be a very effective.
(2) for a circular pipe cleaning material transfer, can be used for various models of “Brontosaurus” flexible machine plus “Brontosaurus” 4000m3/h or 8000m3/h collector, and the use of “dust cleaning method for cleaning can also be very effective”.

Suggested the use of equipment:

1,Shovel the robot and robot cleaner, four in one module robot;

dust-suction-robot-small  dust-shoveling-robot Air-Duct-Whipping-Robot small Air Duct Spraying and sterilizing robot small +  GX-08-1

2, Standard automatic cleaning robot  Or Large cleaning robot Or Duct Cleaning Robot For Circular Pipe And Rectangle Duct

Air-Duct-Cleaning-Robot-GX-08-4 Or  Large automatic cleaning robot+GX-08-1 Or 

3, Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)  Or Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System) Or Intelligent Flexible-Shaft Air Duct Cleaner

4. 4000 m³ /h Vacuum Dust Collector Bucket  or 8000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma Or  Dust-Collector-Bucket-2-sma

Cleaning textile chemical fiber plant

Textile chemical fiber plant is special, because of technical reasons inside wind pipe workshop and there are a lot of cotton and chemical fiber and flying everywhere, all with a hair brush used robots and flexible machine an not be used, because the cotton and chemical fiber will soon be all covered with brush and lose effectiveness. Can only use and effective equipment is “Brontosaurus” air knife equipment or “Brontosaurus” four wind knife robot modules in robot plus “Brontosaurus” 4000m3/h or 8000m3/h collector, and the use of “dust cleaning method for cleaning will be very effective”.

Suggested the use of equipment:

1,Shovel the robot and robot cleaner, four in one module robot;

dust-suction-robot-small  dust-shoveling-robot Air-Duct-Whipping-Robot small Air Duct Spraying and sterilizing robot small +  GX-08-1

2,Air knife and vibration whip equipment:

Wind knife and vibration whip air duct cleaner SMALL Wind knife and vibration whip air duct cleaner SMALL

3. 4000 m³ /h Vacuum Dust Collector Bucket  or 8000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma Or  Dust-Collector-Bucket-2-sma

 


 

Or you can use:

All-In-One Duct Cleaning Explosion-Proof Robot With Video Or Rotary Brush Air Duct Cleaning Explosion-Proof Equipment

All-in-one Duct Cleaning Equipment with Video  Rotobrush air duct cleaning machine

Cleaning solution for large shopping malls and supermarkets air duct

Cleaning solution for large shopping malls and supermarkets air duct 81

Cleaning solutions for large shopping malls and supermarkets air ductCleaning solution for large shopping malls and supermarkets air duct

Large shopping malls and supermarkets central air conditioning mode is basically used to centralize air sending, and in a small amount of area,installed with an auxiliary fan coil. Each floor stores and supermarkets are equipped with more than one large fresh air blower or large VAV units, in the form of by large-sized main duct (usually 1500mm * 630mm or more) cross-section becomes smaller for each region branch air duct (eg 630mm * 350mm and other specifications), for large stores and supermarkets central air conditioning duct cleaning,recommend following equipment :
(1) for large stores and supermarkets in the main air duct central air conditioning, relatively large cross-section,you can use standard robot or super large robot to clean, and then use the four-in-one module robot vacuuming robot to suction the bottom of the dust.
(2) For large shopping malls and hypermarkets branch duct in central air conditioning system, you can use a standard clear cleaning robots ,and 4000m3 / h or 8000m3 / h Dust collector.

Suggested the use of the device:

1, Standard automatic cleaning robot  Or Large cleaning robot Or Duct Cleaning Robot For Circular Pipe And Rectangle Duct

Air-Duct-Cleaning-Robot-GX-08-4 Or  Large automatic cleaning robot+GX-08-1 Or 
2, Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)  Or Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System) Or Intelligent Flexible-Shaft Air Duct Cleaner

3. 4000 m³ /h Vacuum Dust Collector Bucket  or 8000 m³ /h Vacuum Dust Collector Bucket

Dust-Collector-Bucket-1-sma Or  Dust-Collector-Bucket-2-sma


 Configuration B:

1,For rectangle,use  All-In-One Duct Cleaning Equipment With Video:

All-in-one Duct Cleaning Equipment with Video

2,For erect duct or for branch duct,use  all In One Air Duct Cleaning Equipments,With Function Of Cleaning And Suction,Without Video Monitor

all-in-one-without-video