logo

Steel sheet stamping

Steel sheet stamping

Metal Products Fabricate In China  >> Sheet Metal Stamping >>Steel sheet stamping

Steel sheet stamping means to process steel sheet/plate/panel with technology of stamping,punching,cutting,bending,forming and deep-drawing by machines of punch,cut,bender,hydraulic press.The products of steel sheet stamping are widely used in the field of industry, agriculture, building, defense,  transporation,aerospace,electronics,datalink,etc.The surface of steel sheet stamping products are always polishing,powder painting,electroplating.Above all will be finished by Metalhelper/Smartclima,who can be your best assistance in the metal products process.

 Steel Sheet Stamping– Customize to process/manufacture  Steel Sheet Stamping products

Sheet Metal Stamping Quotation

Steel sheet stamping Steel sheet flat spreading

We adope the technology of rolling and drawing to flat steel sheet automatically,controlled by computer,high precision on dimension. Count pieces number automatically.No need other worker to operate it after you put steel panel roll into the roll bar.The material thickness which can be processed is from 0.5mm to 5mm,and the width can be from 10mm to 800mm.The matericals which can be process is steel sheet,stainless steel sheet,aluminium sheet,copper sheet.Rolls state material  will be spread to flat and then automaticlly cut.Because of mechnical oil is sprayed on the working rolls,so,the surface of steel can be protected well.Then the cuted pieces are ready for next procedures. By this working technology,our working effience can be raised much.Working time is less than 80% and get more high precision.Especially, workers will be more safe when he is working/operating machine. Now,the machine has been one of our best machines to process steel sheet stamping products.

 

 

 

 

Steel sheet stamping Automatically cutting and punching

The machine of automatic cutting and punching is put ahead of steel sheet flad spreading machine.The flat sheet comes out from spreading machine automatically,and then it is got by automatic machine of cutting and punching. The machine of automatic cuting and punching is equiped with hole mold and cuting shear ,which can be used to punch and cutting steel sheet.And then automatically droped onto the trolly plat. After collecting a full of cart,the worked pieces will be sent to the next procedures ,for forming or for deep-drawing. The machines are controlled by computer,count pieces number automatically,no or less worker to take care of it. The material thickness which can be processed is from 0.5mm to 5mm,and the width can be from 10mm to 800mm.The matericals which can be process is steel sheet,stainless steel sheet,aluminium sheet,copper sheet. By this working technology,our working effience can be raised much.Working time is less than 80% and get more high precision.Especially, workers will be more safe when he is working/operating machine

 

Steel sheet stamping

Steel Sheet Mechanical punching

We owned traditional mechanical punching machines from 10Ton to 250Ton to process various sheet metal products with different thickness. Punching is the most effective but cheapest process technology to make holes in metal strip or sheet metal.It is equiped with dies/molds to create multiple shaped holes of different dimension.Punches and dies are usually fabricated from conventional tool steel or carbides. Mold/die is made by ourselves,as we have a workshop to process fabrication of mold/die professionally. The material thickness which can be processed is from 0.5mm to 5mm,and the width can be from 10mm to 1000mm.The matericals which can be process is steel sheet,stainless steel sheet,aluminium sheet,copper sheet.

 

 

 

Steel sheet stamping Steel sheet CNC stamping

We are equiped with CNC punching machine which is utilizing computer to control machine to process stamping on workpiece.CNC is the latest equipment available in the industry, such as water jet, laser and other cutting edge technology. Coupled with heavy plate capabilities and certified welding services, we are proud to bring you good service to custom sheet metal fabrication. From high volume production to prototypes, no job is too big or too small. If you have sample or drawing which want to be customed to produce metal products,just send it to us,we`ll study it and quote to you.Providing complete solution for high quality custom sheet metal fabrication, assembly and finishing. We take pride in working closely with our customers in order to provide the highest level of service.

 

 

The material thickness which can be processed is from 0.5mm to 3mm,and the width can be from 50mm to 2000mm.The matericals which can be process is steel sheet,stainless steel sheet(the thickness of stainless steel sheet to process is 1.8mm max.),aluminium sheet,copper sheet. CNC stamping is most precise to process sheet metal products,as it is controled by computer automatically. We have 2 set of CNC stamping machines to process your products and Steel sheet stamping.

 

 

 

 

Steel sheet stamping

Steel sheet CNC bending

Steel sheet CNC bending is a process to bend sheet metal to an angle product, typically a V shaped punch and die(from degree 20to degree 160). The steel sheet is usually put between the punch and die which presses down on the sheet. CNC bending provides a low cost method to product 3D shapes from 2D sheets. CNC bending is a suitable for processing most ductile metals and primarily for sheet metal designs with one or more bends. it can brackets,supports,cabinets,enclosures, frames,chassis, etc. There is generally no special tooling required for CNC bending, with the exception of intricate designs and special bends. At present,we owned 2set of steel sheet CNC bending machines to process your metal products and Steel sheet stamping products.

 

 

 

 

formingSteel sheet forming

Sheet metal forming means the processes of force is applied to a piece of sheet metal to modify its geometry rather than remove any material. The applied force stresses the metal beyond its yield strength, causing the material to plastically deform, but not to fail. The usual machine to do above fabrication mainly is Hydraulic press machine.By doing so with Hydraulic press machine, the sheet can be bent or stretched into a variety of complex shapes. Sheet metal forming processes include the following:Bending,Roll forming,Spinning,Deep Drawing and Stretch forming. At present,we owned 6set of Hydraulic press machine from 100Ton to 315Ton to process your metal products and Steel sheet stamping.

 

 

 

 

Mechanical automatic Steel sheet stamping Metalhelper is equiped with Mechanical automatic Steel sheet Stamping machine which is utilizing fixed program to process sheet metal punching or deep drawing or forming on metal workpiece.Mechanical automatic Stamping  is the updated  technology from traditional punching technology.Automatic Stamping is more widely used in todays industrybecause of its high effience and less worker cost.Usually,it can save 80% worker cost,compared with traditional punching machine. Coupled with heavy plate capabilities and certified welding services, we are proud to bring you good service to custom sheet metal fabrication. From high volume production to prototypes, no job is too big or too small. If you have sample or drawing which want to be customed to produce metal products,just send it to us,we`ll study it and quote to you.Providing complete solution for high quality custom sheet metal fabrication, assembly and finishing. We take pride in working closely with our customers in order to provide the highest level of service.

Sheet Metal Stamping Quotation

MetalHelper can do:

● Mold&Toolmaking for steel sheet stamping

● Sheet Steel Stamping,bending,forming,and deep-drawing

● Steel Sheet cutting,Laser Cutting

● Steel Sheet punching,CNC sheet steel punching

● Steel Sheet bending,CNC sheet steel bending

● Steel Sheet welding,MIG and TIG welding of aluminium, mild steel and stainless steel

● Steel Sheet polishing

● Steel Sheet powdering, Powder Coating and Spray painting

● Fastener Insertion

● Metal product assembling work, including electrical assembly

procedures

Request Quotation for Steel Sheet Stamping fabrication,Let China metal factory serve for you:

[contact-form-7 id=”19″ title=”Contact form 1″] Sheet Metal Stamping

Steel sheet stamping,Steel plate stamping, Steel sheet punching,Steel panel stamping fabrication

Stainless steel sheet stamping, Stainless steel plate punching,Stainless steel panel stamping fabrication

Aluminium sheet stamping,Aluminium plate stamping,Aluminium sheet punching,Aluminium panel stamping fabrication

Copper sheet stamping,Copper plate stamping,Copper sheet punching,Copper panel stamping fabrication

Steel sheet forming,steel plate forming,steel sheet deep drawing process,steel panel forming fabrication

Stainless steel sheet forming,Stainless steel plate forming,Stainless steel sheet deep drawing process,Stainless steel panel forming fabrication

Aluminium sheet forming,Aluminium plate forming,Aluminium sheet deep drawing process,Aluminium panel forming fabrication

Copper sheet forming,Copper plate forming,Copper sheet deep drawing process,Copper panel forming fabrication

Return to the top

Metal Products Fabricate In China  >> Sheet Metal Stamping >>Steel sheet stamping

2 Inquires to Steel sheet stamping

  1. Can a steel sheet 5mm be stamped? We are an auto factory,want to update our technology to do steel parts…pls reply me and then talk more together.

Send An Inquiry To Us

Your email address will not be published. Required fields are marked *