Solenoid Valve for solar thermo system

Posted by: admin-smartclima | October 11, 2013

Solenoid Valve for solar thermo system

DC12V or DC24V or AC220V (Option)

Connection: G1/2″
Solenoid valve Material: Body part is plastic, connector is copper;
Operating voltage range: Rated voltage ± 10%
Filtering function: Removable cleaning filter device;
Return function: Yes
Action Features: 100,000 times without wrong
pressure: Yes

Above is Solar solenoid valve with pressure. The solenoid valve is suitable for supply tape water for multi-storey residential(less than 10 layers), especially to supply water for unstable water pressure or water tower, the valve is with non-return valve function to avoid hot water backflow, or even ruins water pipe

Features of Solenoid Valve for solar thermo system:

★ Control mode: DC 12V;
★ Media: liquid,water, etc.
★ Medium temperature: 1 ~ 88 °C;
★ Connection: G1/2″;
★ Solenoid valve Material: Body part is plastic, connector is brass;
★ Voltage Range: Rated voltage ± 10%
★ Water pressure Range: 0.02MPa-0.8MPa; Solenoid valve with pressure is used in city water;Solenoid valve without pressure is used in the water tower;
★ Filtering function: Removable cleaning filter device;
★ No-Return function: Yes;
★ Action Features: 100,000 times without wrong;

With non-return function,so,no need to install check valve;

Above is Solar solenoid valve non-pressure.The solenoid valve is suitable for high-rise residential (more than 10 layers) or water pressure unstable, it has non-return function.

Features of Solenoid Valve for solar thermo system:

With non-return function,so,no need to install check valve;