Solar Charge Controller MPPT
Home>> Solar Utilizing >>Solar Photovoltaic System & Mounting System>>Solar Charge Controller MPPT
Solar Charge Controller MPPT
Model: WS-MPPT60
| Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
Application： | 40A 48V PV System Controllers | Weight： | 1100g |
Model： | WS-MPPT60 | Package： | 16pcs/carton |
| Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
| Application： | 50A 12/24V solar battery charge controller | Weight： | 1100g |
Model： | WS-MPPT60 | Package： | 16pcs/carton |
| Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
| Application： | 50A 48V solar panel controller | Weight： | 1100g |
Model： | WS-MPPT60 | Package： | 16pcs/carton |
| Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
| Application： | 60A 12/24V Charge regulator | Weight： | 1100g |
Model： | WS-MPPT60 | Package： | 16pcs/carton |
| Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
| Application： | 60A 48V Solar energy controller | Weight： | 1100g |
Model： | WS-MPPT60 | Package： | 16pcs/carton |
Model | WS-MPPT60 40A | WS-MPPT60 50A | WS-MPPT60 60A |
Rated Voltage | 12V/24V/48V 12V/24V/48V 12V/24V/48V | ||
Max Load current | 40A | 50A | 60A |
Input voltage range | 12V~20V / 24V~40V / 48V~80V | ||
Length≤1m Charge loop drop | 0.25V | ||
Length≤1m Discharge loop drop | 0.05V | ||
Over voltage protection | 17V / 34V / 58V | ||
Full charge cut | 13.7V / 27.4V / 54.8V | ||
Low voltage cut | 10.5~11V / 21V~22V / 42V | ||
Temperature compensation | -3mv/°C / cell | ||
No load loss | ≤30mA | ||
Max wire area | 6mm2 | 6 mm2 | 6 mm2 |
Ambient temperature | -25°C—+55°C | ||
Model: WS-MPPT80
Description： | Solar Charge Controller MPPT | Dimension： | 210*125*50mm |
Application： | 80A 24V/48V Solar Charge Controller | Weight： | 1100g |
Model： | WS-MPPT80 | Package： | 16pcs/carton |
Model | WS-MPPT80 24V 80A | WS-MPPT80 48V 80A | |||
Rated Voltage | 24V | 48V | |||
Max Load current | 80A | ||||
Input voltage range | 24V～80V | 48V～110V | |||
Length≤1m Charge loop drop | ＜0.25V | ||||
Length≤1m Discharge loop drop | ＜0.05V | ||||
Over voltage protection | 34V | 68V | |||
Full charge cut | 27.4V | 54.8V | |||
Low voltage cut | 21V-22V | 42V | |||
Temperature compensation | -3mv/℃/cell | ||||
No load loss | ≤30mA | ||||
Max wire area | 12mm² | 12mm² | |||
Our Solar Charge Controller MPPT can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with standard solar controller, this MPPT controller can increase the efficiency of PV modules by 10%-30%. Solar Charge Controller MPPT 10A–60A include 12V series, 24V series and 48V series.
I have purchased 2 20w 24v solar panels, and I wish to link them to my Recreational Vehicle. There preliminary job will be to keep the battery charged, but later on to charge a set of batteries to run the electrical devices (primarily the interior lights).
currently, I’ve just purchased the 2 solar panels. I figure that the charge controller need to be next. Should I just buy a cheap charge controller and lose some of the effectiveness of the solar panels (i’m thinking i’ll lose some charge when the panels drop to match the battery voltage)… or should I pick the more costly MPPT charge controller.
Another note … what gadget should I use to have the solar panels immediately change over to charge the 2nd set of batteries once the begun batter is completely charged?
Thanks in advance.