logo

Replacement Vent Hood,Louver Dryer Vent

Home>>Ventilation Material>>Air Terminal Devices>>Air Grilles>>Replacement Vent Hood,Louver Dryer Vent

Replacement Vent Hood

Item: Replacement Vent Hood,Louver Dryer Vent

Short Description:Deflecto Exhaust Clothes Dryer Replacement Vent Hood,same as Supurr-Vent Replacement Vent Hood,also named Plastic Replacement Louver Dryer Vent, Replacement Vent Hood.It is an Air Louvre diffuser Gravity louvred grill vent,usually known by the flap vent used in bathroom,kitchen range hood,and fresh air system,and so on.It allows indoor air blow to outdoor atmosphere ,at the same time,preventing cold or dirty outdoor air  from go into the house. Usually works with exhaust fans and replace the old vent hood.The louver leaf is closed off and self-hanging down when it is not working.While the air blow out,the louvre will be self-movables.With net installed,prevent mosquitoes from entering the room.Resistant to UV;Nice looking, durable, convenient installation. Is an energy-saving and environmental protection product.

Size: connector diameterΦ100mm/4″,Φ125mm,Φ150mm/6″
Color: White or Brown

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Replacement Vent Hood
Models and details on Replacement Vent Hood,Louver Dryer Vent

Features:

Round connector,Square faceplate;

plastic louvre air outlet;

Calcium filled polypropelene plastic,UV resistant;

With 25mm deep back round neck flange for duct connecting;

Go with 4pcs screws.

when the air blow out,the louvre will be self-movables;when stop to supply air,the louvre will hang down to prevent the duct enter into the duct.Very simple design but very effective, installed in the hole, fan hole, vent, to against sand, dust, extract indoor air to outdirect.

Mounted on the wall, can rise to the indoor ventilation effect.

Φ100/4″ Replacement Vent Hood,Louver Dryer Vent

Size: connector diameter Φ100mm/4″

* Notice: type Φ100mm doesn`t have mesh net!

self-movable air outlet grille-2 self-movable louvre-1air outlet grille-3

Φ125,Φ150 Replacement Vent Hood,Louver Dryer Vent

Size: connector diameter Φ125,Φ150mm/6″

* Notice: type Φ125mm& Φ150mm have mesh net!

air outlet 150mm-1 air outlet 150mm-2 air outlet 150mm-3 air outlet 150mm-4

Buying Guide to “Replacement Vent Hood,Louver Dryer Vent”
  • The vent hood is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Accept customized production;
  • More types of  dryer vent are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: [email protected] ,we can supply a favourite item you need.
General Knowledge on “Replacement Vent Hood,Louver Dryer Vent”

replace dryer Vent Hood

When the dryer is on and air is forced through the duct, the louvers will open.

Vent-Hood-opens_when_air_bl

When the dryer is on and air is forced through the duct, the louvers will open.

Home>>Ventilation Material>>Air Terminal Devices>>Air Grilles>>Replacement Vent Hood,Louver Dryer Vent

Leave a Reply

Your email address will not be published. Required fields are marked *