Sale!

QUNDA KT-6018 Universal Air Conditioner Remote Controller

$0.01

SellQUNDA KT-6018 Universal Air Conditioner Remote Controller,it can be used to control many types air conditioner.

  • Place of Origin: China
  • Sell to worldwide, Ship by air plane or by sea boat;

 Send Enquiry Message

QUNDA KT-6018 Universal Air Conditioner Remote Controller Using guide

Dear user,thanks for choosing our remote, and bring you convenience is our best wish. KT-6018 is a 6000 codes universal remote suitable for domestic kits, international kits, new models, old models, frequency conversion, inverter unit, and controls 98% of the air conditioners all over the world. It contains electric heater, timer on/off, inputting codes by digital keys. Due to the patent of inputting codes by digital keys(Patent no ZL200810023186.7), even thousands of the codes we only need few seconds to finish the setting. It’s your best choice to update and replace the originals. Please carefully read the instruction before your setting and help you use the remote easily.

Setting
Open the battery cover and insert two AAA batteries by right polarity. Set as following down.

1. Set the code 1)Pick the code of your brand on the code list. If yours are more than one, please start from the first, then follow down until it works. Such as Aucma, first input”0288″. If it doesn’t work,then input “0289”.

2)Press “SELECT” button, the code will flash on the LCD. Then input the right code successively. Such as “0288”,first press “0” and “0” stops flashing, then press “2” and “2” stops flashing. press “8” and “8” stops flashing, press “8” and “8” stops flashing. The setting is finished, it will be confimed automatically.

3)Aim at the air conditioner and check all of the buttons work well. If it doesn’t, operate as No.2 to input the code “0289” or the next.

Auto research

If you don’t know the brand or can’t find it on the code list, please operate as following.

1)Aim at the air conditioner and hold “SELECT” for five seconds. Then the remote will go into auto research and send signal continuously. The code will flash and increase, once the air conditioner receives it and send “BUZZER sound. Press any button to confirm(it needs you quick, or the the code may be over to result you research again).

2)After the air conditioner turned on, check all of the buttons work well. If it doesn’t, repeat the above operation until all done.

TIMER ON/OFF

Set the timer on when power off, and set the timer off when power on.

1. Press the “TIMER ON” button, the LCD displays the clock symbol and time blinking. Press “TEMP + or-” button, adjust to the required time(every pressing for one hour, the maximum is 12 hours).Press “TIMER ON/OK” to confirm. Also it will confirm automatically after 8 seconds without operation.

2. Press the “TIMER OFF” button, the LCD displays the clock symbol and time blinking. Press “TEMP + or – ” button, adjust to the required time(every pressing for one hour, the maximum is 12 hours).Press “TIMER OFF/OK” to confirm. Also it will confirm automatically after 8 seconds without operation.

NOTE:

1.After timer setting, the launch direction of remote control must be aim at the receiving direction of your air conditioner in an effective distance, otherwise the timer setting ineffectively.

2.After timer setting, repress “TIMER ON/OFF” button to cancel. (Cancel timer on to press “TIMER ON” button, cancel timer off to press “TIMER OFF” button).

Brand code table

QUNDA KT-6018 Universal Air Conditioner Remote Controller 535

Attention

1. If it is not used for a long time, remove the battery to avoid leakage liquid of the battery to damage the remote control. When the LCD looks dim, please change batteries. (New and old batteries cannot be used together) After the batteries are replaced every time, it is not necessary to set model code again.

2. Check carefully that there is no remora between remote controller and Air conditioner when the time on/off doesn’t work. Because the operation is effective only when the air conditioner receives the timer on/off signal from remote controller.

3. The manufacturer keeps the right to change the parameter and function of product.

 How to purchase “QUNDA KT-6018 Universal Air Conditioner Remote Controller”

  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us online (click here) Or send inquiry message to our email:  @smartclima.com

Enquiry or Reviews

5 Star

100 %
1 review(s)

4 Star

0 %
0 review(s)

3 Star

0 %
0 review(s)

2 Star

0 %
0 review(s)

1 Star

0 %
0 review(s)

Reviewed by 01 customer(s)

  • Waseem

    Hi sir I bay qunda kT-5999
    And I’m don’t find the cod for nakai split 1.5ton

    2023-02-24

Write enquiry message or review

Rate Your Satisfaction*