logo

Quick wire splice connector

quick-wire-splice-connector

Quick wire splice connector let splicing wire just get easier. A quick, easy way to splice wires together for your electric project. Reserve one port for the incoming power, then plug your power wires into the other ports. You’ll likely need one for the positive wires and one for the negative wires, so be sure to buy at least two. You will need to strip off about 1/4″ of wire insulation to make a good connection. 

Choose from a 3 pin, or 5 pin model. 
– All pins have electrical continuity.
– Spring loaded: lift up the orange “finger”, put in stripped wire, push the orange finger back down, and spring loaded action clamps down on wire.
– Not waterproof.
– Need more than 5 pins? Multiple units can easily be daisy chained. 

Application:

application

PCT-212 , 2 ports,works for hard conductor wire 0.08mm2– 2.5 mm2;

soft conductor wire 0.08 mm2– 4 mm2;

PCT-213 , 3 ports,works for hard conductor wire 0.08mm2– 2.5 mm2;

soft conductor wire 0.08 mm2– 4 mm2;

PCT-215 , 5 ports,works for hard conductor wire 0.08mm2– 2.5 mm2;

soft conductor wire 0.08 mm2– 4 mm2;

PCT-111 , 1 port, round hole works for single hard conductor wire 1mm2– 2.5 mm2 ;

Square hole works for hard or soft conductor wire 0.5 mm2– 2.5 mm2;

PCT-102 , 2 ports, works for single hard conductor wire 0.75mm2– 2.5 mm2 ;

Soft Multi-wire conductor wire 1.5 mm2– 2.5 mm2;

PCT-103D , 3 ports, works for single hard conductor wire 0.75mm2– 6 mm2 ;

Soft Multi-wire conductor wire 1.5 mm2– 6 mm2;

PCT-106 , 6 ports, works for single hard conductor wire 0.75mm2– 2.5 mm2 ;

Soft Multi-wire conductor wire 1.5 mm2– 2.5 mm2;

PCT-108 , 8 ports, works for single hard conductor wire 0.75mm2– 2.5 mm2 ;

Soft Multi-wire conductor wire 1.5 mm2– 2.5 mm2;

application2

Traditional wrong wire-Slow,diffcult,dangerous:

wrong-wire

Latest wire method,using Quick wire splice connector-Quick, Easy, and Secure

quick-splice-step

One Inquiry to Quick wire splice connector

Send An Inquiry To Us

Your email address will not be published. Required fields are marked *