Pressure Switch for Air Conditioner or Heat Pump or Refrigeration system
High/low pressure controller, pressure switch
Application: Refrigeration system, air conditioners, air energy water heaters, heat pumps, cold and hot water machines, special booster water pumps, air pumps, etc…
Models: high voltage switch (green), low voltage switch (black), cable length 50cm
High-pressure/welding/with wiring, On 1.9Mpa,Off 2.4MPA Low-pressure//welding/with wiring, On 0.15Mpa,Off 0.3MPA High-pressure/nut screw/with wiring, On 1.9Mpa,Off 2.4MPA Low-pressure/nut screw/with wiring, On 0.15Mpa,Off 0.3MPA High-pressure/nut screw/ with insert piece, On 1.9Mpa,Off 2.4MPA Low-pressure/nut screw/ with insert piece, On 0.15Mpa,Off 0.3MPA High-pressure/welding/ with insert piece, On 1.9Mpa,Off 2.4MPA Low-pressure/welding/ with insert piece, On 0.15Mpa,Off 0.3MPA High-pressure/welding/ with insert piece, On 2.2Mpa,Off 2.8MPA Low-pressure/welding/ with insert piece, On 0.05Mpa,Off 0.15MPA High-pressure/welding/with wiring, On 2.2Mpa,Off 2.8MPA Low-pressure/welding/with wiring, On 0.05Mpa,Off 0.15MPA High-pressure/nut screw/with insert piece, On 2.2Mpa,Off 2.8MPA Low-pressure/nut screw/with insert piece, On 0.05Mpa,Off 0.15MPA High-pressure/nut screw/with wiring, On 2.2Mpa,Off 2.8MPA Low-pressure/nut screw/with wiring, On 0.05Mpa,Off 0.15MPA High-pressure/nut screw/with wiring, On 3.6Mpa,Off 4.2MPA High-pressure/nut screw/with insert piece, On 3.6Mpa,Off 4.2MPA High-pressure/welding/ with wiring, On 3.6Mpa,Off 4.2MPA High-pressure/welding/ with insert piece, On 3.6Mpa,Off 4.2MPA High-pressure/welding/ with insert piece, On 2.4Mpa,Off 3.0MPA High-pressure/welding/ with wiring, On 2.4Mpa,Off 3.0MPA nut screw/with wiring, On 2.4Mpa,Off 3.0MPA nut screw/with wiring, On 1.7Mpa,Off 1.2MPA
Place of origin: Supplied by China Manfacturer, Made in China, export to worldwide.
Models & Details for “Pressure Switch for Air Conditioner or Heat Pump or Refrigeration system”
Miniature pressure switch An electric switch that closes or disconnects the control circuit as the pressure of the controlled medium rises and falls. It is widely used in refrigeration units, various air conditioners, oil pumps and air pumps, and other industrial equipment that needs to adjust the pressure of the medium by itself to protect the pressure system.
Working principle: When the pressure of the controlled medium rises to a certain set value, the butterfly-shaped metal diaphragm will be unstable and jump. By pushing the ejector rod, the switch contact is connected (or disconnected). When the pressure of the controlled medium drops to another set value, the butterfly-shaped metal diaphragm will suddenly jump back to its original state, causing the switch contact to be opened (or connected), thus realizing the function of the switch.
When the pressure of the controlled medium decreases, the switch cannot automatically reset, and the circuit always maintains the state after the conversion. Only when the reset button is pressed by hand, the circuit returns to the original state.
Technical parameter
Reset method
automatic
Manual
Terminal type and contact form
A=wire type, normally open type B=wire type, normally closed type c=plug type, normally open type D=plug type, normally closed type E=wire type, single pole double throw F=plug type, single pole double Throw
Need a quotation for 500 units of the 2 following items – Pressure Switch for Heat Pump: – High pressure switch: open 350 psi / close 250 psi – Low pressure switch: open 5 psi / close 20 psi
Write enquiry message or review