PID digital thermostat temperature controller model XH-W2023

You are locating here ⇓

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit >> Embeded Type Thermostat>>PID digital thermostat temperature controller model XH-W2023

Item: PID digital thermostat temperature controller model XH-W2023

Test range: -55-120 ℃
Control precision: +/-0.1℃ to 0.2 ℃
Refresh frequency: 4times/s;
Input Power: DC12V-24V;
Output:Max 10A;
Max. Power: 12V=180W, 24V=360W;
Circumstance: 0-50℃<85%RH;
Size: 75* 35*85mm; Hole size: 70x29mm;
Option:temp. sensor head can be optional,see below.

Place of origin: China factory sell directly , Sell to worldwide.

Q: what is the PID temperature control?

Answer: this problem is more professional and complex, can be said to be a more advanced control mode than the bit type control! Simply say that there is no return to the poor temperature control, set the number of degrees is the number of degrees.

Q: how does a solid state output? Do I have to use a solid state relay?

Answer: there is no solid output relay output using SCR control, thermostat internal integrated 2 original MOS tube, support the frequent switch without mechanical movement, the control process control without a sound, more sensitive, more long life. The output end can be directly connected to the load without the need to buy a solid state relay.

Q: Can it control heating and cooling?

Answer: This is a special heating. Cooling mode can not be used.

Q: how much is this V powered? Max control how much W?

Answer: This is a dedicated 12V-24V, through the MOS tube directly to the output voltage to the load! Can only be used for 12-24V, higher than 27V damage may be, 29V on the overvoltage burned, 220V is not burned to say! Buy when there is a choice, without the extra voltage power loss! As the output of the number of W to see the voltage, the maximum current is 12V, =180W, 24V, =360W, 15A, of course, to want to output such a large power front end power supply must be sufficient.

Q: how to use this thermostat?

Answer: in the power supply side connected to the DC 12V or 24V power supply, the output can be connected to the load.

How to operate?

1. Connect the 12V or 24V power supply to the input terminal and connect the heating device to the output terminal.
2. After power on ,the screen shows real-time temperature, press SET once to set the required temperature, press Rst to confirm;
3. Long-time press Rst to turn-off machine, power off switch machine status and settings are automatically saved;
4. Press SET button for 5 seconds to enter the internal function setting. (Press + – to start the factory settings)
5. Fault code. Sensor failure —, after the temperature alarm ,the screen temperature flashing;

• The Digital  temperature controller is available for retail and wholesale;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Please contact us to email: econtrol@smartclima.com ,we can supply a favourite item you need.

You are locating here:

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit >> Embeded Type Thermostat>>PID digital thermostat temperature controller model XH-W2023