Unistrut Channel Pipe Clamp
Unistrut Channel Pipe Clamp
Aslo named Channel Rigid Pipe Clamp,Unistrut Fiberglass Rigid Pipe Clamp,Unistrut Pipe and Conduit Clamps,UNISTRUT Cush-A-Clamp Assembly.It is made from hot-dipped galvanized sheet steel,designed to isolate HVAC`s copper or steel tube. Including clamp and the hardware,rubber cushion is optional. They are always used to hange pipe on Unistrut Channels.It is available in a variety of diameters.Screw and nut are included.
Materiaal: Mild steel with galvanized/hot-dipped galvanized sheet steel or stainless steel.
Size&Model: See Below
Application: They always used in unistrut channles as hanging fittings;Always used in ventilation system and HVAC project,mounting EMT or rigid conduit from strut channel.
Plaats van oorsprong: China , Sell to worldwide.
Tips： How to identify authentic 304 stainless steel products?
①support the detection of special detection potions for 304 stainless steel. If it does not change color, it will be authentic 304 stainless steel.
②support chemical composition analysis and spectral analysis.
③Support smoke testing to simulate the actual use environment.
Size choice reference:
Pipe Clamp for Hanging SupensionUnistrut Channel（Without Inner rubber coat）:
1/2″,that is DN15（Inner Diameter 21.7mm）
3/4″,that is DN20（Inner Diameter 27.2mm）
1″,that is DN25（Inner Diameter 34mm）
1-1/4″,that is DN32（Inner Diameter 42.7mm）
1-1/2″,that is DN40（Inner Diameter 48.6mm）
2″,that is DN50（Inner Diameter 60.5）
2-1/2″,that is DN65（Inner Diameter 76.3mm）
3″,that is DN80 （Inner Diameter 89.1mm）
4″,that is DN100（Inner Diameter 114.3）
5″,that is DN125（Inner Diameter 139.8mm）
6″,that is DN150（Inner Diameter 165.2mm）
8″,that is DN200（Inner Diameter 216.2mm）
10″,that is DN250（Inner Diameter 270mm）
Pipe Clamp for Hanging SupensionUnistrut Channel（With Inner rubber coat）:
1/2″,that is DN15（Inner Diameter 19mm）
3/4″,that is DN20（Inner Diameter 25mm）
1″,that is DN25（Inner Diameter 31.5mm）
1-1/4″,that is DN32（Inner Diameter 40mm）
1-1/2″,that is DN40（Inner Diameter 45.5mm）
2″,that is DN50（Inner Diameter 57.5）
2-1/2″,that is DN65（Inner Diameter 73mm）
3″,that is DN80 （Inner Diameter 86mm）
4″,that is DN100（Inner Diameter 110mm）
5″,that is DN125（Inner Diameter 136mm）
6″,that is DN150（Inner Diameter 161mm）
8″,that is DN200（Inner Diameter 215mm）
10″,that is DN250（Inner Diameter 268mm）
Buying Guide to “Unistrut Channel Pipe Clamp”
- The clamp is available for retail and wholesale;
- Available complete range of sizes and models;
- Enough stock to have a quick delivery time;
- The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
- Accept bulk order with Container delivery,or by air delivery;
- More types are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: [email protected] ,we can supply a favourite item you need.
General knowledge on “Unistrut Channel Pipe Clamp”
Unistrut Channel Pipe Clamp seems like a jelly sandwich,it was designed to be twist-inserted any place along the slot side of the unitstrut channel for safe mounting and supporting,offering a pre-assembled construction so that you can install it quickly and easily. it is convenient to put two pieces together, special functional and a good union.If want change the old PB & J into Fluffernutter, you need to put the basic channel mounted to install a pipe wrench and graduate to a more highly evolved ditch Cush -A- clamp; it simply put together, and even more features, and more a wonderful combination.
Pipe wrench and channel mounting channel combination of form and function to create a wonderful marriage; it Cush -A- pliers combine to create a perfect, long-lasting marriage.
The Unistrut Pipe and Conduit Clamps, by definition, is a buffer clamp and Frustration shock and vibration, as well as to prevent electrochemical corrosion and help extend the life of the thermoplastic elastomer system inserted. Highly durable plastic is the most chemicals, oils, and industrial cleaning agents, corrosion at temperatures ranging from -50 ° F to 275 ° F.
Cush-A-Clamp is easy to assemble and install by one worker; “living hinge” design patent allows for pipes and conduits can be easily inserted into the pad, while maintaining close coordination. Sandwiched between two pipes provided (OD) and pipe (nominal) size from ¼ “pipe and 6-1 / 8” pipe and 6 “pipes.
Cush-A-Clamp is electro-galvanized complete the most common sales, but in type 304 stainless steel are also available, and can be manufactured with grade 316 stainless steel sheet as well.
They are always used in UNISTRUT steel channel and Channel Support System.