Manual Hairpin Tube Bender,Manual pipe bender with Mandrel

Manual Hairpin Tube Bender,Manual pipe bender with Mandrel9

Manual Hairpin Tube Bender,Manual pipe bender with Mandrel

Korte Beschrijving: manual mandrel tube bender,Hand tube bending machine, is developed to fabricate and process tight metal bends in thin wall tubing without the space issues and expense of a full blown automatic mandrel bender.The device machine by hand can bend up to Φ22.22 OD mild steel pipe ,aluminium tube,or copper tube.With dies for bend different diameter pipes.It is a must-have device to fabricate aluminium fin tubing coil with less invest cost.

Size/Dimension: You can choose the machine with going different dies as following: 1/4″,5/16″,3/8″,1/2″,5/8″,3/4″,7/8″,1″,1-1/8″, or other customized size.

Plaats van oorsprong: China , Sell to worldwide.

 

 Bestelling of onderzoek op"Manual Hairpin Tube Bender,Manual pipe bender with Mandrel"

 

Models and Details for “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel "

Toepassing :
This product is widely used for bending copper tube and stainless steel tube in manual,a must-have equipment for your refrigeration work.

Manual machine for Tube Bending Manual Hairpin Tube Bender,Manual pipe bender with Mandrel9 Manual pipe bending equipment with Mandrelcoil stainless steel pipe coil copper pipe with mandrel bender bend stainless steel tube bent copper tube

 Hoe te bestellen "Manual Hairpin Tube Bender,Manual pipe bender with Mandrel"

  • The machine  is available for retail and wholesale;
  • The device takes heavy weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accepteren bulk volgorde met Container levering;
  • Please contact us to email: [email protected]

General Knowledge on “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel"

Why the Manual pipe bender with Mandrel is better than that without mandrel?

Pulling technology that with mandrel core-pulling mechanism, to let you can bend smaller radius workpieces without wrinkling, the processed workpiece has better quality with mandrel core-pulling mechanism.

What is the role of Mandrel bar in the bender?

All the pulling mandrel bender should have mandrel bar, as opposed to the traditional pipe, with the mandrel ,you would not filling sand into the pipe, it is more easy to use, fast, and better results,can prevent contention and curved lines.

How much time shoud take when change the die?

Usually,you can change the die for different radius within 10 miniutes or less.

How to maintenance?

Add oil often when process to bend pipe,which can let you get the better qulity bending tube.

What material is better to use as  mandrel bar in pulling draw mandrel bender ?

I do not know your frequency of use, but generally core pulling mandrel bender`s pumping working conditions are not harsh, generally with quenched and tempered steel surface hardening can be added. Not need expensive tool steel.

Can I buy spare parts or tools parts after I buy the bender?

Yes,of course,you can buy any part or tool pieces at any time.

One Inquiry to Manual Hairpin Tube Bender,Manual pipe bender with Mandrel

Stuur Onderzoek Bericht

Your email address will not be published,just for us to contact you privately. Vereiste velden zijn gemarkeerd met *