Metal Tube Cutting
Carboon steel tube cutting;
Stainless steel tube cutting;
Aluminium tube cutting;
Copper tube cutting;
Metal pipe or Metal Bar is also available
- Metal Tube Bending
- Metal Welding
- Metal Tube Stamping
- Metal Tube Deforming
|What can we do for you?|
|General Knowledge on “Metal Tube cutting”|
What is Metal Tube cutting?
Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing(tube deforming). The specific definition for sheet metal drawing is that it involves plastic deformation over a curved axis. For wire, bar, and tube drawing the starting stock is drawn through a die to reduce its diameter and increase its length. Drawing is usually done at room temperature, thus classified a cold working process, however it may be performed at elevated temperatures to hot work large wires, rods or hollow sections in order to reduce forces.
Sheet Metal Drawing is different from rolling in that the pressure of drawing it not transmitted through the turning action of the mill, but instead depends on force directed locally at the area of compression. This means the amount of possible drawing force is limited by the tensile strength of the material, a fact that is particularly evident when drawing thin wires.
Material for Metal Tube cutting.
Usually,the following metal are always to do tube cutting:
- Galvanized Steel/Carbon Steel tube,pipe or solid bar;
- Stainless Steel 304, 316,430 tube,pipe or solid bar;
- Aluminum tube,pipe or solid bar;
- Many grades of material available, please email us with your material requirements.
The shape of metal tube cutting
- Metal tube;
- Metal pipe;
- Metal solid bar;
The secondary process after metal tube cutting:
- Stamping or drill holes;
- Bending or Deforming;
- machined or lathing.Machining process is usually to make screw thread or make a horizontal hole on the cold forming product.As cold forming process itself is diffcult to make thread or horizontal hole.
- Welding. Weld some part onto the tube;
- Powder painting.After all processes are finished,some products are required to do powder painting.
|Contact MetalHelper to Tube cutting|
Submit drawings for Metal Tube Fabrication,Let Metalhelper manufacture it for you.
Let Metalhelper to help you process/manufacture Metal Tube Fabrication,Please send us the meassage with drawing or sample photo,and tell us your purchased quantity in first order,and then we`ll quote to you. The more details on product you provide,the more quick we can quote. You also can visit http://www.metalhelper.com to contact Metalhelper company directly for Sheet Metal Stamping business