Intelligent digital display dual-channel vibration temperature pressure liquid level flow test and display instrument analog input

1 Overview

1.1 Two-way measurement input, each input is displayed independently.

1.2 It can be used in conjunction with various sensors and transmitters to realize the measurement and display of physical quantities such as temperature, pressure, liquid level, speed, and force.

1.3 The input adopts a digital correction system, with built-in non-linear correction tables for common thermocouples and thermal resistances, with high measurement accuracy

1.4 The instrument has a built-in operation unit, and its operation results are used for display, communication, transmission and alarm. The operation unit performs any one of the following operations on the measured values ​​between channels by setting: addition, subtraction, calculation of the average value, and judgment of the maximum value (or minimum value)

2. Specifications

2.1 Working power supply: 90~260V AC, power consumption is less than 5VA (other power supply instruments can be ordered)

2.2 Working environment: 0℃~50℃, humidity lower than 90%RH

2.3 Display range: -1999~9999, decimal point position can be set

2.4 Input signal type: thermal resistance Pt100, Cu100, Cu50, BA1, BA2, G53,
thermoelectric Even K, E, S, T, B, R, N, J, Wre325, Wre526
voltage and current 0-5V, 1-5V, 0-10V, 0-10mA, 0-20mA, 4-20mA multi-signal compatible input (Selected by key setting)

2.5 Measurement accuracy: ±0.2%FS

2.6 Alarm output: supports up to 4 relay outputs (2 points as standard), and the contact capacity is 5A/220V AC.

2.7 Feed output: DC24V(±10%) /30mA

2.8 Appearance and installation dimensions: Appearance dimension 160*80*80mm, opening size 152*76mm (other dimensions need to be ordered)

• The item  is available for retail and wholesale;
• The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
• Accept bulk order with Container delivery;
• Please contact us online (click here) Or send inquiry message to our email:  sale@smartclima.com