Sale

HTC-1 HTC-2 temperature clock humidity electronic thermometer

$1.00

Supply HTC-1 HTC-2 temperature clock humidity electronic thermometer.See the below images.

  • Place of Origin: China
  • Sell to worldwide, Ship by air plane or by sea boat;

Send Enquiry Message

The product is liked & shared by worldwide clients:

Models and Details for “HTC-1 HTC-2 temperature clock humidity electronic thermometer ”

HTC-1 electronic temperature and humidity controller

featuers of HTC-1 electronic temperature and humidity controller

HTC-1 electronic temperature and humidity controller 02

HTC-2 temperature humidity digital thermometer with sensor probe

featuers of HTC-2 electronic temperature and humidity controller

Operation method:
1. Open the battery door in the direction indicated by the back of the machine, install the battery, and then install the battery door back, and the machine will be ready to use.

2. Button function: [MODE] Switch the clock and alarm clock display mode/set the current clock, alarm clock, 12 or 24-hour clock,
Date; [AD] Adjust the value of the set item; [MEMORY] Display the highest &lowest temperature humidity value/clear record in MEMORY.
The highest &lowest temperature humidity values of the memory: [°C/°F] Switch the temperature unit to display °C (degrees Fahrenheit) or °F (degrees Fahrenheit); [RESET] Clear all settings & memory values and return to the initial state.

3. Press and hold [MODE] for 2 seconds in the initial state, the minutes and seconds of the current time start to flash, press [ADJ] to adjust the minutes,The number of seconds, press [MODE] continuously to set the “clock”, “12/24”, “Month (M)”, and “Day (D)” respectively.

4. In the current clock mode (the two points between the clock and the minute flash every second), press [MODE] once to switch the display.
It is shown as the alarm mode (the two points between the clock and the minute do not flash). At this time, press [ADJ] to switch the “Alarm” (Alarm).
Function/”Whole point timekeeping” () function switch, press and hold [MODDE] for 2 seconds, you can set the alarm time, and start “whole” at the same time.
Click the “timekeeping” function, the () symbol appears.

5.In alarm mode, if there is no operation, the current clock will automatically return after one minute. At this time, press [ADJ] once to switch.
To the calendar display, the current CLOCK will be automatically shipped back after 3 seconds, press the [MEMORY] button to display the TEMPERATURE/HUMIDITY and CLEAR it for the LAST time (CLEAR) The maximum/minimum value since.

6.Press (MOEMORY) to display the maximum temperature/humidity value (MAX) and minimum value (MIN) of the MEMORY, PRESS and HOLD [MEMORY] The maximum/minimum value can be cleared in more than 2 seconds.

7.Press the F°/C° conversion button in the bracket.

How to purchase “HTC-1 HTC-2 temperature clock humidity electronic thermometer ”

  • The thermometer is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us online (click here) Or send inquiry message to our email:  sale@smartclima.com

Enquiry or Reviews

There are no reviews yet.

Be the first to review “HTC-1 HTC-2 temperature clock humidity electronic thermometer”

Rate Your Satisfaction*