logo

Helical Coil Heat Exchanger

Helical-Coil-Heat-Exchanger

Item: Helical Coil Heat Exchanger

Short Description: Helical coil heat exchanger is alway used in the field of cooling&heating system as immersion  heating exchanger tanks and vessels. Tube pipe sprial coils provides a low-cost l and effective method of getting heat transfer surface area. Tube coils are made by rolling lengths of tubing into helixes or double helixes in which the inlet and outlet are located at one side or at two sides. We can supply various coils in various metals including titanium coils,copper tubes and duplex stainless coils, all of which can be supplied in segments or fully fabricated and hydrostatically tested.

Materials:Stainless Steel tube grade 304 or 316L,Copper tube, titanium pipe;

Important Features:Helical Coil,double stacked,etc.

Size/Dimension:customized dimension as you required.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Helical Coil Heat Exchanger
Models & Details for “Helical Coil Heat-Exchanger”

Advantage :

√ Made of Stainless Steel tube grade 304 or 316L,Copper tube, titanium pipe;,can stand high pressure.
√ Can processed into any shape and size by your design,customized dimension is accepted.
√ Nice looking,the surface is polished and reached food grade standards.
√ Smooth inner surface and the refrigerant or water can circulate in the coil,small pressure-drop;
√ Customizable size if you required.

Dimension and Parameter: the coil accept customized dimension.

Helical Coil Tube Heat Exchangerwater tank coil heat exchanger coil heat exchanger with opposite end tube custom-stainless-steel-coil heat exchangercustomize stainless steel coil heat exchanger both end at same direction Double tube parallel spiral coil heat exchangerdouble-Helical-coil pressure-washer-steam-cleaner-jet-wash-heating-burner-boiler-coilfire heating stainless steel coil Helical-Coil-Heat-Exchanger 010 stainless-steel-coil two pipe comes from top end tube in tube helical coil heat exchanger very small coil stainless steel both ends come out at two endsheating-coil-made-from-copper-tubeheat-exchanger-copper-tube-coilflat pancake coil heat exchanger

Buying guide to “Helical Coil Heat Exchanger”
  • The coil  is available for retail and wholesale,accepting single piece to customize;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

4 Inquires to Helical Coil Heat Exchanger

  1. Hi There,

    We have been working on tender for an atmospheric storage tank for produced water and for which, we need a submerged heating coil for winter.

    The bundle should be removable from a 24” nozzle so we are thinking of one of your Helical Coil heat exchanger.

    The exchanger bundle shall design the DN600 nozzle, which will be used for the installation of the bundle. Vendor to design exchanger bundle with all supports and provision for lifting / pulling.

    The requirements for the bundle are as follows:

    Length (L): VTA – Shall be less than tank ID of 3500 mm – Total length of the pipe (not bundle length) is 20,000 mm
    Pipe nominal diameter: 2”
    Pitch (P): 4” (VTC) – should be more that twice the pipe nominal diameter
    Bundle diameter (D):20” (VTC) – bundle shall be removable from a DN600 (24”) nozzle
    Material: Duplex (UNS S31803)
    Pipe Design Pressure: 4000 kPag @ 210 °C (tube side)
    Heating medium: (Hot side – inside pipe) Hot water at 190 OC (down to 140 OC)
    Tank medium:(Cold side – outside pipe) Produced water, heating up from 18 OC to 35 OC

    In view of above, we would like you to provide us with your technical and budgetary offer.

    Moreover, please advise if you could assist us in finalising the value for the Overall Heat Transfer Rate with respect to the fouling factors.

    Thanks

  2. hello
    what is the Specification, dimension and price for helical cooling exchanger for water cooling at 0.9 L/min and from 35 c to 20 c.
    my cooling system medium fluid is etylen glycol and water and its specification is:
    Q=10 L/min
    Tmax in=-5 c
    Tmax out=-20 c
    maximmum power=880w

  3. Dear Mr, Mrs

    I would be interested to have a quotation for differents sample of Helical coil in copper.

    Actually i see that you have differents models, and i’m not sure how i can explain which one i want.

    Do you need a plan or can you propose a catalog with the different model name?

    Here is the first information i can give you:
    Helical heat exchanger
    D = 40 mm
    L = 120 and 140 mm
    T = 10 mm
    P = 10 mm
    0 = 0°

    Tubing dimenson
    Ext diameter: 6mm
    internal diameter: 4mm
    Copper

    It will be for a quantity of 700 pcs/years.
    I will be also interested in samples to test the efficiency.

    Thank you for the futur information.

    Kind regards

Leave a Reply

Your email address will not be published. Required fields are marked *