Short Description:Ceramic heater 1.Property:good chemical stability;strong causticity-resistance;perfect oxidation-resistance 2.Heat losing in the non-radiation surface is small 3.The base body is heated to 800 C and put in cold water repeatly for ten times and no cracking. 4.The radiated element is heated after electrifying to rating power and immerged into cold water after interruption of power supply for forty times without damage. 5.The effect of energy saving is obvious,increasing 10-25% compared with silicon carbide element .The life span can prolong more than a few times compared with silicon carbide element.
Models & Details for “Heating elements ceramic heater”
Ceramic heating board
Pictures
Type
Color
Size
Voltage
Power
Black empty
black
120X60
230V
200W
300W
400W
500W
120X120
250W
400W
500W
650W
240X60
250W
500W
650W
800W
240X80
1000W
500W
650W
1000W
flat
white
90X90
230V
200W
300W
400W
120X120
250W
400W
500W
650W
200X300
1000W
arc
white black
120X60
230V
200W
300W
400W
500W
240X60
250W
500W
650W
800W
1000W
240X80
500W
650W
1000W
300X70
1500W
Silicon carbide far infrared heating board
Pictures
specifications
voltage
power
thickness
120*330
230V
580W
20
150*200
600W
150*300
1200W
150*500
270W
160*240
800W
200*300
1200W
200*400
1500W
200*500
2000W
210*320
1450W
240*330
1500W
240*330
2000W
250*500
2500W
300*400
2000W
300*500
2500W
300*500
3000W
350*500
2550W
400*600
4000W
Furnace (oven special)
Specifications
80x120x200
120x200x300
160x250x400
200x300x500
Note: optional DianLuSi, specifications can customize according to customer’s request.
Immersion heater with ceramic heating element are made from long-lasting and high quality materials which are mounted in cylindrical shape shown on picture below.Immersion heater with ceramic heating element are made from very hard materials so they’re resistant for damages. Ceramic profiles provides homogeneous heating of the whole surface. Medium is heated through the temperature radiation.
Application: Immersion heater with ceramic heating element separate heating elements from water or oil. Primarily used for heating water, liquids and oil products. They are primarily installed in tanks and containers in which the heating elements is placed inside a tube to allow replacement of the heating element without having to empty the tank or container. When using pouring tubes, a larger surface is achieved for better heat disbution, which enables high power to be installed in the container with a ceramic heating element.
Properties: 1. The ceramic body being treated against damp. 2. Adopting the hoskins hi-nickel resistance wire. 3. Without dropping of hi-temperature resistance wire. 4. Any broken-wire will not touch the shell. 5. Longer operation life.
Specification of Immersion heater with ceramic heating element: 220V\1200W; 220V\1500W; Special specification can be customized by customer.
Ceramic profile (circle) – single element which is use to bulit complete cylindrical heater. Quantity of those elements depends on lenght (L), diameter (Ø), power and application of the heater. Ceramic heating elements are connected axially and secured to head. Lead wires are connected to head by wire clamps or directly. Distance of unheated zone (Lm), is determined by a customer.
Heating coil – made of high quality resistance heating wire is put in ceramic profiles. Diameter of heating coil strictly depends on heating power, supply voltage and size of heating element.
TECHNICAL DATA:
Lenght (L) [mm]
200 – 6000
Diameter (Ø) [mm]
12; 16; 31;32;;36;44;49;62;67(68);108……
Voltage [V]
220; 230; 380; 3×380; 400; 3×400 or different
Max. temperature [¡ãC]
800
Heating power [W]
250 – 8000
Max. Surface load [W/cm2]
7
Notice: the customer must provide drawing or sample of Immersion heater with ceramic heating element which need.If no drawing or no sample,you must tell us the following information: Product dimension,Voltage,power,length, diameter,etc.
PEXAMPLE APPLICATIONS for Immersion heater with ceramic heating element : heating of: air, tunels, space; stoves: accumulative, tiled; bakery; confectionery; electroplating plants; rubber and synthetic materials processing;quenching oil baths, drying ovens, degreasing baths.
Outer Diameter mm
For Flange Tube Dimension mm
Length Range mm
Power Range kw/m
Water
Heating Oil
φ31
φ38×3
300 – 1500
4.5-5.5
3.5-4
φ44
φ51×3
300 – 2000
6-7
4-5
φ49
φ57×3.5
300 – 2500
7-8
5-6
φ62
φ70×3.5
500 – 3000
8.5-9.5
6.5-7.5
φ67(φ68)
φ76×4(φ76×3.5)
500 – 3500
9.5-10.5
7-8
φ108
φ121×5
1000 – 6000
15-17
12-13
Buying Guide to “Heating elements ceramic heater”
The product is available for retail and wholesale;
The place of origin is in China,when you buy one or a small quantity,please consider international air freight as cost;
Accept bulk order with Container delivery;
Accept customized production for bulk order;
More types of Heating elements ceramic heater are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: sale@smartclima.com ,we can supply a favourite item you need.
General Knowledge on “Heating elements ceramic heater”
Send us your enquiry message or review.You also can write email to us: sale@smartclima.com or info@smartclima.com . Smartclima team will reply you within 24 hours.
Enquiry or Review on “Heating elements ceramic heater” Cancel reply
Enquiry or Review on “Heating elements ceramic heater”