Large Duct Cleaning Robot
Item: Large Duct Cleaning Robot kit,for large rectangle air duct cleaning
Brief Description: It is a large automatic cleaning robot designed for large air duct in the height of 600mm – 1500mm. In order to save the cost of purchasing this
machine for the customer, a mechanically-driven extending arm is added to
the automatic cleaning robot in original standard to reach the cleaning height
of 1500 mm. Other technical indicators of this machine are equivalent to the
standard automatic cleaning machine. The customer only has to buy the
mechanical extending arm in addition to the standard automatic cleaning
Special Function: Can cope with rectangle duct high 600mm-1500mm.
Lieu d'origine: China , Sell to worldwide.
|Order or Inquiry on “Large Duct Cleaning Robot”|
|Models & Details for “Large Duct Cleaning Robot”|
Large Duct Cleaning Robot
Technical Data and Standard Configuration:
Dimensions:850mm (Length) X 380mm (Width) X 730mm (Height)
Voltage:24VDC; power: 375W
Operating stroke:20 meters for standard configuration, can be extended to
100 meters according to requirements
Types and material of air duct to be cleaned:large rectangular or square
ducts made of metal and composite material
Range of cleaning:height 600mm -1500mm (with lateral rolling brush or
rotating brush) X width (no requirements)
Brush control:point-position electrical control (automatic adjustable highest
and lowest point limits)
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing ＞45mm, climbing capacity ＞40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial color cameras, of which the front one has the capacity of 360°rotation horizontally and 180°pitching rotation, four rear and front scatter-type high-intensity lighting (LED
light source with low temperature and long service life)
Controller for Large Duct Cleaning Robot,Model GX-08-1
With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment
Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
(1) 10.4′high-definition LCD,synchronous monitoring and recording system, Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2) Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
(1) Four-wheel moving synchronous system of robot and the turning differential system.
(2) Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3) Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4) Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.
|Buying Guide to “Large Duct Cleaning Robot”|
- The kit including Robot+controller(including brushes,and electrical wire).
- Available for retail and wholesale;
- The place of origin is in China,when you buy one or a small quantity,please consider freight(by sea or by air) into the cost;
- Accepter en bloc de commande avec livraison des Conteneurs;
- Accept customized production;
- More Duct Cleaning Devices,please contact us to email: [email protected] ,we can supply a favourite item you need.
|General Knowledge on “Large Duct Cleaning Robot ”|