Item: Air Conditioner Synchronous Motor, Indoor Unit Swing Motor
Short description: A synchronous electric motor is an AC motor in which, at steady state,the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles. Synchronous motors contain multiphase AC electromagnets on the stator of the motor that create a magnetic field which rotates in time with the oscillations of the line current. The rotor with permanent magnets or electromagnets turns in step with the stator field at the same rate and as a result, provides the second synchronized rotating magnet field of any AC motor. A synchronous motor is only considered doubly-fed if is supplied with independently excited multiphase AC electromagnets on both the rotor and stator.Also named Air conditioner indoor gear fan.It is a small fan motor to works air conditioner outlet,let plastic leaf baffle to move and swirl.12V DC driven.
More details on“Air Conditioner Synchronous Motor”
Buying Guide to “Air Conditioner Synchronous Motor”
The Air Conditioner Synchronous Motor is available for retail and wholesale;
The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
Accepter en bloc de commande avec livraison des Conteneurs;
More types of Synchronous Motor for air conditioner are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: [email protected] ,we can supply a favourite item you need.
General Knowledge on “Air Conditioner Synchronous Motor”
Several reasons for the failure of Air conditioner pendulum synchronous motorFor the failure of the stepping motor of the air conditioner, there are generally two situations. One case is that the stepping motor is faulty, which causes the airflow flap of the air conditioner to fail to operate normally. The second situation is caused by man-made. After the air conditioner is turned on, the position of the swinging blade is artificially shaken, causing the pendulum blade to not close normally after being turned off. In this case, the power plug of the air conditioner can be unplugged and then plugged in again to resume normal procedures.