Models & Details for “Electric High Pressure Cleaning Device For Air Conditioner Washing”
Features:
Voltage: 220v Working pressure: 0.8Mpa Frequency: 50Hz Jet flow: 1-2ml / s Working current: 0.4 ~ 0.6A Capacity: 0.65L Power: 45W Net weight: 1KG
1,It is an advanced and efficient air conditioner cleaning tools, noise, intensity, can be adjusted freely sprayed force;
2, Suitable for high pressure water jet cleaning effect is very good;
3,for air conditioner,computers, servers and other live cleaning operations;
4, The pressure generated by the motor, preventing traditional compression to produce water, moisture content to avoid leaving a short circuit;
5, a liquid having a certain compression capacity;
6, inside the chassis to quickly rinse all parts of the motherboard and chassis dirt;
7, improve work efficiency, and ensure job security;
Using Scope: Host and large servers or precision instrument care and maintenance cleaning inside the gap
Using the Operation 1, the liquid spray bottle filled with liquid. Connected to the 220V power supply, press the switch, the gun that is launched, there is a strong vibration and impact sound, a few seconds after the start of injection, and to work deep into the sound. 2, such as failed after starting work, then try adjusting the knob back, the method is: first knob and then slowly back into action in order to achieve a minimum sound pressure up to date. Hand at the test pressure from vents at 50cm, with strong hemp shock. (Note: after a good tune, usually do not just go and adjust) 3, decontamination effective distance between the nozzle and the object 10-15cm, by operating at 45 degree angle, to remove stains repeatedly until the jet.
Maintenance A gun sustainable jobs, but also need to pay attention to moderate, to avoid overheating damage. 2, the sound normal but no injection, or injection, weakness, loose is the nozzle clogging, unscrew the nozzle, clean out debris, or from the inside out with a fine needle to gently twist through. 3, jet normal, but seem inadequate or unstable pressure, open the lid handle, check the pump tight wire gong is loose. 4, after the job is completed, the need to empty the spray for a few seconds, the liquid pump spray finish, and then into the lubricating oil drops from the hole and then empty spray a few seconds. 5, the gun belongs to the high-pressure shock gun, must not be on the human body spray. It should be placed in the reach of children
Buying Guide to “Electric High Pressure Cleaning Device For Air Conditioner Washing”
The device is available for retail and wholesale;
The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
Be the first to review “Electric High Pressure Cleaning Device For Air Conditioner Washing”