Digital Thermostat Module Model XH-W2100

Digital Thermostat Module Model XH-W2100

Temperature range: -9 ~ 99 ℃
Temperature measurement accuracy: 1 ℃
Control accuracy: ± 1 ℃
Setting range: -9 ~ 99 ℃
Refresh rate: 0.5 S
Input Power: AC220V
Measurement input: NTC (3950-10K 1%) 2 meters waterproof sensor
Output: 1500W / 2200W (based on purchase power used)
Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%
Size: 98 * 137 * 45mm

Place of origin: China factory sell directly , Sell to worldwide.

Features
1, set the automatic power-off memory
2, STM-speed flash RAM chip temperature
3, FR-4 double-sided, fully automatic chip technology
4. Enter the adoption GB 2 * 1mm2 super thick wire
5, the output socket is thick nickel-plated copper shrapnel
6, ABS new material Ivory film casting upscale housing

Technical parameters

Temperature range: -9 ~ 99 ℃

Temperature measurement accuracy: 1 ℃

Control accuracy: ± 1 ℃

Setting range: -9 ~ 99 ℃

Refresh rate: 0.5 S

Input Power: AC220V

Measurement input: NTC (3950-10K 1%) 2 meters waterproof sensor

Output: 1500W / 2200W (based on purchase power used)

Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%

Size: 98 * 137 * 45mm

Lights, digital control, key state Description

Work indicator: Start (red) indicator light, said device starts work.

Stop lights: Stop (green) indicator light indicates that the device stops working.

Digital tube: middle red LED display for the current temperature detected on the left green LED set start temperature for the right green LED is set to stop temperature.

Key: Start temperature “▲ ▼” to set the starting temperature; stop temperature “▲ ▼” to set stop temperature.

Operate Instructions

1. Start temperature – cooling mode – control refrigeration equipment:

Set start temperature> stop temperature: when the detected temperature ≥ start temperature (red light) refrigeration equipment work; when the detected temperature ≤ stop temperature, (green light) refrigeration equipment stops working. For example: Set the start temperature is 30 ℃, stop temperature is 25 ℃, when the detected temperature ≥30 ℃, the red light, refrigeration equipment to start work; when the detected temperature values ≤25 ℃, green light, refrigeration equipment stops working.

2. cold start – heating mode – control heating equipment:

Set start temperature value <stop temperature: when the detected temperature ≤ starting temperature (red light) heating equipment work; when the detected temperature ≥ stop temperature, (green light) heating device stops working. For example: Set the start temperature is 25 ℃, stop temperature is 30 ℃, when the detected temperature ≤25 ℃, the red light, heating equipment to start work; when the detected temperature ≥30 ℃, the green light, the heating device stops working.

Using Scope

For devices which controlled temperature is below 110 degrees, such as greenhouses, bedroom, storage, boiler, warm ….

• The Digital Thermostat Module Model XH-W1210 is available for retail and wholesale;
• Accept customized bulk production,putting your logo;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Please contact us to email: hvac@smartclima.com ,we can supply a favourite item you need.