Digital Thermostat Module Model XH-W1701

[content id=”32106″][content id=”32211″] You are here: Smartclima Home>> Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit>>Thermostat mainboard>>

Item: Digital Thermostat Module Model XH-W1701

Specifications Model: XH-W1701
Temperature control: on-off
Control mode: heating, cooling, cooling
Temperature control range: 20-90 ℃
Control accuracy: 0.1 ℃
Hysteresis setting: 1-10 ℃
Refresh rate: 0.5S
Power supply voltage: DC12V
Static current: ≤ 3MA pull current ≤ 60MA
Output voltage: DC12V
Output power: up to 200W
Appearance size: 36.5 * 36.5 * 18mm
Mounting screw: M3 * 2 Diagonal dimension 39.5mm
Temperature probe: 10K thermistor B25 = 10K 3950 0.5 meter waterproof sensor
Environmental requirements: Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%

Place of origin: China factory sell directly , Sell to worldwide.

Specifications Model: XH-W1701
Temperature control: on-off
Control mode: heating, cooling, cooling
Temperature control range: 20-90 ℃
Control accuracy: 0.1 ℃
Hysteresis setting: 1-10 ℃
Refresh rate: 0.5S
Power supply voltage: DC12V
Static current: ≤ 3MA pull current ≤ 60MA
Output voltage: DC12V
Output power: up to 200W
Appearance size: 36.5 * 36.5 * 18mm
Mounting screw: M3 * 2 Diagonal dimension 39.5mm
Temperature probe: 10K thermistor B25 = 10K 3950 0.5 meter waterproof sensor
Environmental requirements: Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%

How to operate:

According to drawings to connect the circuit, power supply is the DC12V (+12 V is positive for the negative GND);
Temperature control probe is placed onto the object;
For heating: connect the 12V heater to the -H + (note the positive and negative)
For cooling: Please put the refrigerator connected to the + C- (note the positive and negative)
For cooling: Please put the cooler or cooling fan connected to the + C- (note the positive and negative)
Indicator State Description
The red indicator light on the board indicates that the cooling (+ C-) has an output
Off (-H +) There is output
Parameter Function Description
The temperature control switch board is set to use the DIP switch mode, 1-4 for the temperature control selection 5-6 for the hysteresis setting, from right to left to binary mode from small to large settings, when the temperature control switch is fully closed state, Only -H + has output, not controlled
Example: to the radiator plus temperature control switch, when the temperature is higher than 40 degrees to open the cooling fan, the temperature is lower than 35 degrees turn off the cooling fan
DC12V connected to the power supply side, the cooling fan connected to the + C-
We want to set the parameters for the temperature control = 40 hysteresis = 5
According to the parameter table and known as 24 open for the temperature control 40 degrees, 5 open for the hysteresis 5 degrees other is fully closed, set OK!

• The Digital Thermostat Module Model XH-W1701 is available for retail and wholesale;
• Accept customized bulk production,putting your logo;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Please contact us to email: econtrol@smartclima.com or sale@smartclima.com ,we can supply a favourite item you need.