Digital Temperature & Humidity Controller Thermostat mainboard

[content id=”32106″][content id=”32231″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit>>Humidity and Temperature Controller >>Digital Temperature & Humidity Controller Thermostat mainboard”

Item: Digital Temperature & Humidity Controller Thermostat mainboard

Manufacturer: Smartclima
Model:XH-TH1008

1. Temperature measurement range 0 to 80 ° C
2. Humidity measuring range 0% RH to 99.9% RH
3. Temperature resolution 0.1 ° C, humidity resolution 0.1% RH (control accuracy of 0.1)
4. Working voltage AC/DC12V;
5. With power-off parameter memory protection
6. Size: 7CM × 7CM × 3CM

Place of origin: China factory sell directly , Sell to worldwide.

Features &Technical parameters
1. Temperature measurement range 0 to 80 ° C
2. Humidity measuring range 0% RH to 99.9% RH
3. Temperature resolution 0.1 ° C, humidity resolution 0.1% RH (control accuracy of 0.1)
4. Working voltage AC/DC12V;
5. With power-off parameter memory protection
6. Size: 7CM × 7CM × 3CM
7.Double screen window,one screen shows temperature,the other shows humidity;

The meaning of the characters when the main window displays:
S01: Start temperature setting symbol
S02: Stop temperature setting symbol
SC1: Temperature correction value setting symbol
S03: Activate the humidity setting symbol
S04: Stop the humidity setting symbol
SC2: Humidity correction value setting symbol
S01: Start temperature setting symbol
S02: Stop temperature setting symbol
SC1: Temperature correction value setting symbol
S03: Activate the humidity setting symbol
S04: Stop the humidity setting symbol
SC2: Humidity correction value setting symbol

How to operate:

Press the set key for 3 seconds to enter the parameter setting menu, the temperature display window displays the start temperature value setting symbol “SO1”, and the humidity display window shows the starting temperature value.

For example, set the start temperature of 23.4 degrees,

Enter the setup menu, the decimal point flashes, press the key to set the decimal place to 4, then press the set plus shift to a bit on the flash, press the set key will be set to 3, then set the plus shift to ten , Press Set key to set the tens digit to 2, and then press function key to save

Stop temperature value setting “SO2” (set the way with SO1),
Temperature correction value setting “SC1”, by setting the addition and setting to reduce the setting, press the set key to save the setting

Start the humidity value setting “SO3” (set the way with SO1),

Stop the humidity value setting “SO4” (set the way with SO1),

Set the humidity correction value “SC2”, decrease the setting by setting the plus setting, and press the set key to save the setting

Finish Set to enter into working mode

Setting sample:

1, set the temperature 50.5° C power-on, 45.5° C power-off:
Set SO1 at 50.5 and set SO2 at 45.5.

2, set the temperature 45.5° C powe-on, 50.5° C power-off:
Set SO1 at 45.5 and set SO2 at 50.5.

3, set the humidity 50.5° C power-on, 45.5° C power-off:
Set SO3 at 50.5 and set SO4 at 45.5.

4, set the humidity 45.5° C power-on, 50.5° C power-off:
Set SO3 at 45.5 and set SO4 at 50.5.

If “–.-” is displayed, please check whether the sensor is off or damaged. At this moment, the instrument will start the protection function automatically, cut off the load power supply,and repair it and then can be used again

• The digital-temperature-humidity-controller-thermostat is available for retail and wholesale;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Please contact us to email: hvac@smartclima.com ,we can supply a favourite item you need.