Digital regulatable thermostat temperature controller model XH-W2028

Posted by: admin-smartclima | February 14, 2017

You are locating here ⇓

Temp. & Humidity Controlling ⇓	Water Flowing & Pressure Controlling	Audio Amplifier Controlling	Voice/Color/ Fire Modules	Vibration Module	Hall Sensor Module
Wireless Module	Relay Extending Module	Infrared/Lighting Electric Module	Timing Module	Motor Module	LCD Module
GY Module	Development Board	Other Function Module	Voltage & Current Controlling	Tools&Meters	Electronics Accessories

Thermostat mainboard	Embeded Type Thermostat ⇓	Mounted Type Thermostat	PID Thermostat	Analog Signal output	Dual Temp. Controller
Humidity Controller	ThermoElectric Module temp. controller	High temperature controller	Mechanial thermostat	Other Thermostat	Thermostat Accessories

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit >> Embeded Type Thermostat>>Digital regulatable thermostat temperature controller model XH-W2028

Item: Digital regulatable thermostat temperature controller model XH-W2028

Input Voltage: DC12V

Control Range: -50~110℃

Resolution:-9.9~99.9℃: 0.1℃,Else Range: 1℃

Control Accuracy: 0.1℃; Temperature Accuracy: 0.2%FS

Refresh Rate: 0.5s

Measurement Input: NTC(B3950=10K 0.5%)waterproof sensor (Cable Length: 1 meter)

Output: Output Switch, Max. 10A

Environment Requirement: -30~60℃
Humidity: 20%~85%

Size:-Complete Size: 77 x 35 x 88mm;-Open-pore Size: 70.5 x 29mm

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Digital regulatable thermostat temperature controller model XH-W2028”

Models & Details for “Digital regulatable thermostat temperature controller model XH-W2028 ”

Five option:
Power supply 12V (no buzzer)
Power supply 24V (no buzzer)
Power supply 220V (no buzzer
Power supply 12V (with buzzer)
Power supply 24V (with buzzer)
Power supply 220V (with buzzer

Specification:

Input Voltage: DC12V

Control Range: -50~110℃

Resolution:

-9.9~99.9℃: 0.1℃

Else Range: 1℃

Control Accuracy: 0.1℃

Temperature Accuracy: 0.2%FS

Refresh Rate: 0.5s

Measurement Input: NTC(B3950=10K 0.5%)waterproof sensor (Cable Length: 1 meter)

Output: Output Switch, Max. 10A

Environment Requirement: -30~60℃

Humidity: 20%~85%

Size:

-Complete Size: 77 x 35 x 88mm

-Open-pore Size: 70.5 x 29mm

Freezer Temperature Controller Technical Parameters

Temperature Range	-50~110℃
Temperature Resolution	0.1℃(-9.9~99.9) the other section is 1℃
Control Precision	0.2%FS
Refreshing Frequency	0.5s
Power Supply	12V/24V/220V(optional)
Input Signal	NTC(B3950=10K 0.5%) 1m waterproof sensor
Output Type	Output directly, the maximum capacity 10A
Environment Temperature	-30~60℃
Environment Humidity	20%~85%RH
Dimensions(mm)	773588(mm)
Opening Size	70.5*29(mm)

Freezer Temperature Controller Function Parameters Description

Keep pressing “SET” key for 5sec to enter into inner parameters setting, you can switch P0-P8 by the arrow keys and press “RST” key to confirm.

Code	Code Description	Setting Range	Factory Default
P0	cooling mode/heating mode	C/H	C
P1	return difference setting	0.1~30	2
P2	upper limit value of control range	120	120
P3	lower limit value of control range	-55	-55
P4	Temperature Correction	-10.0~+10.0℃	0
P5	Time delay after start	0-10minutes	0
P6	High temperature alarm	-50~110	OFF
P7	Data lock	ON/OFF	OFF
P8	Restore Factory Settings	ON/OFF	OFF

Parameter Setting (P0~P8):

-P0: Cooling / Heating mode

-P1: Backlash Setting

-P2:Highest Range Setting

-P3:Lowest Range Setting

-P4:Temperature Calibration

-P5:Delay Start Time

-P6:High Temperature Alarm

-P7: Data Lock Switch

-P8: Restore Factory Settings

Usage: Long-press “Set” button for 5 seconds to enter the internal parameter setting, then press Up/Down button to adjust P0~P8, and press “Rst” to Confim & Back.

How to use DIGITAL TEMPREATURE CONTROLLER THERMOSTAT XH-W2028

Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” cooling mode.
1.3 Setting temperature: press “SET” key and the screen is flickering, then you can set the required temperature by the arrow key.
1.4 “Rst” is enter key, you can keep pressing this key to switch on or shut down.
Freezer Temperature Controller Panel Description

Buying Guide to “Digital regulatable thermostat temperature controller model XH-W2028”

The Digital temperature controller is available for retail and wholesale;
The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
Accept bulk order with Container delivery;
Please contact us to email: [email protected] ,we can supply a favourite item you need.

You are locating here:

Thermostat mainboard	Embeded Type Thermostat ⇑	Mounted Type Thermostat	PID Thermostat	Analog Signal output	Dual Temp. Controller
Humidity Controller	ThermoElectric Module temp. controller	High temperature controller	Mechanial thermostat	Other Thermostat	Thermostat Accessories

Temp. & Humidity Controlling ⇑	Water Flowing & Pressure Controlling	Audio Amplifier Controlling	Voice/Color/ Fire Modules	Vibration Module	Hall Sensor Module
Wireless Module	Relay Extending Module	Infrared/Lighting Electric Module	Timing Module	Motor Module	LCD Module
GY Module	Development Board	Other Function Module	Voltage & Current Controlling	Tools&Meters	Electronics Accessories