Models and Details for “Dial type temperature and humidity controller ”
WSK-P type temperature and humidity controller has high technical content, good stability, can work in harsh environments for a long time, and can be applied to various temperature and humidity control environments. To ensure the normal operation of power equipment.
The functional characteristics 1. The product is compact in size, reasonable in structure design, beautiful in appearance and stable in performance. 2. The sensor has high sensitivity and accurate and reliable control. 3. 1 channel of suspected dew monitoring unit, 1 channel of adjustable temperature monitoring unit, including heating type (adjustable within -40°C~55°C), Accuracy ±1°C, return difference is 2-3°C, connected to heating load), cooling type (adjustable within 0°C~95°C, accuracy ±1°C, The return difference is 2-3°C, connected to the cooling load). 4. Monitor and control changes in environmental temperature and humidity at any time, and the humidity reaches a certain level to trigger the control unit, and the controller drives The electric heater works to reduce the ambient humidity, ensure the optimal humidity environment of the environment, and heat it to the corresponding humidity. The heater is automatically disconnected, and the controller resumes the monitoring state. 5. Heating type: When the current ambient temperature is lower than the set value, the controller drives the heater to start heating, and the ambient temperature When the degree is higher than the set value, the heater is automatically disconnected, and the controller resumes the monitoring state. 6. Cooling type: When the current ambient temperature is high and the set value is high, the controller moves the fan to work to cool down, and when the ambient temperature is low, the controller moves the fan to work to cool down. The fan is automatically disconnected at the set value, and the controller resumes the monitoring state. 7. Each monitoring unit is independent of each other and does not affect each other, making the product easy to install and use. 8. The size is 48*48*78mm.
The main technical parameters Working voltage: AC220V±20% Working frequency: 50HZ Power consumption of the whole machine: less than 3W Output current: 5A (can be equipped with heater or fan) Working environment: temperature -20°C~70°C, humidity<95%RH Temperature control: heating type (-40±1)°C~(55±1)°C Cooling type: (0±1)°C~(95±1)°C Condensation control: (93±1)%RH Insulation resistance: 100 megohms
Be the first to review “Dial type temperature and humidity controller for dehumidification of power distribution cabinet temperature -20°C to 70°C, humidity<95%RH AC220V” Cancel reply
Be the first to review “Dial type temperature and humidity controller for dehumidification of power distribution cabinet temperature -20°C to 70°C, humidity<95%RH AC220V”