Copper Tube Cutter

HVAC Parts >>Refrigerating Parts>>Refrigeration Tools>>  Copper Tube Cutter

Item: Copper Tube Cutter

Short Description: a product to cut metallic tube/pipe,usually used in refrigeration field to cut copper tube/pipe.Made from top quality Tool Steel.Including Standard mini cutters,Heavy-duty cutter,Roller type cutters,

Models & Types : See below.

Size:  1/8″ – 2″

Place of origin: China , Sell to worldwide.

• The Copper Tube Cutter is available for retail and wholesale;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Accept customized production;
• More types of  Copper Tube Cutter are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: ventilation@smartclima.com ,we can supply a favourite item you need.

Tube cutter/Pipe cutter is a tool that to cut metal pipe tools.Copper Tube Cutter is used in refrigeration field to cut copper tube/pipe.Made from top quality Tool Steel

How to use: After being cut pipe pressure pipe clamp firmly rotation (down direction) can be set into the afterburner bar fittings, the CIA and slowly tighten the screw afterburner, when the knife feels difficult, vertical edges around afterburner pipe evenly rotating side, until finally severed pipe.

Using caution:
(1) Select the appropriate diameter was cut according to the specifications of the pipe cutter, in order to avoid the minimum distance between the blade and the roller cutter is smaller than the size of the minimum cut pipe size, resulting from the body slide rails;
(2) Check the cutting knife, forcing screw, cutting wheels turret righting the parts are in good condition;
(3) will be cut pipe with a pipe clamp pressure prison, cutting blades and roller and vertical pipe to prevent the blade cutting edge burst;
(4) will be cut at the required length of pipe draw a good line, release the blade, the cutting knife stuck in the tube, so that the blade alignment crossed, while gradually feed screw with afterburner;
(5) Each feed not excessive force, infeed depth of not more than a half turn of the screw is appropriate, at the beginning of the cutter into the slightly larger amount, in order to cut out deep sipes;
(6) When using the pipe cutter to cut each of the movable portion and the surface of the tube required to add a small amount of lubricating oil to reduce friction.