Sale!

Cat.6 Shielded Patch Panel

$0.01

Cooling DataLink>>Patch Panels>>Cat.6 Shielded Patch Panel

Cat.6 Shielded Patch Panel

Cat.6-Shielded-Patch-Panel

Categories 6 Shielded Patch Panels from Infinique provides higher bandwidth to transmit data in excess of 250MHz, and are well
suited for data centers and storage area networks (SANs). These panels utilize a rugged construction and superior designed IDC with
reinforced ends for installer friendly termination. They are color coded to support T568A and T568B Universal Wiring Schemes.
Collectively with our Copper Systems, they are the right solution for your voice and data communication needs. Cat.6 Shielded
Patch Panel comes complete with cable management tray for cable strain relief and cable dressing. Ports are numbered on the
front and rear of the patch panel for site-specific network administration.

Product Features
 Superior Design Protected PCB
 110 IDCs with Reinforced Ends
 Rear Cable Management Bar for strain
relief and cable dressing
 Clear Plastic Label Holders for efficient
circuit identification
 Color coding for T568A and T568B standards
 Port numbers on front and rear side
 Accepts 22-26 AWG solid wire
 RoHS Compliant

ELECTRICAL SPECIFICATIONS :

Current Rating: 1.5Amp max
Voltage Rating: 150V
Contact Resistance: 20 mOhm
Insulation Resistance: 500 mOhm
Dielectric Strength: 1000 V, AC RMS, 60 Hz/1min
MATERIAL SPECIFICATIONS:
Modular Connector:
Durability:750 Mating Cycles
RJ45 8-Pin Connector:FCC part 68, subpart F anD IEC-60603-7 Compliant
Spring Wire:Phosphor Bronze with 50μ” Gold over 100μ” Nickel Undercoat
Housing:Standard Material Glass Filled Polyester UL94V.O
IDC Connector:
Terminations:Terminates 22~26 AWG (0.64~0.41 mm)
Insulation Diameter:0.70~1.40 mm
IDC Block:200 Termination Cycles
IDC Contact:Phosphor Bronze with 200μ” Silver over 100μ” Nickel undercoat
IDC Body:UL 94V.O Fire-Retardant Plastic
Metal Frame:SPCC Powder Coated Steel

MOUNTING DIMENSIONS
Width: 19″ rack mountable panel
Depth: 1.5” deep without cable management bar, 6.0” deep with cable management bar
Height: 24 Ports Panel: 1.75” (1U), 48 Ports Panel: 3.50” (2U)
STANDARDS/COMPLIANCE
ANSI/TIA/EIA-568-B.2-1 Category 6 requirements, TIA/EIA TSB-40 requirements, ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0, CENELEC Generic Cabling Standard
EN50173 – 1:2002, Compliant with UL1863, RoHS compliant
TYPICAL APPLICATIONS
100BASE‐TX Fast Ethernet, Token Ring, 1000BASE‐T Gigabit Ethernet, 155 Mbps ATM, Composite Video, 622 Mbps ATM

Enquiry or Reviews

There are no reviews yet.

Be the first to review “Cat.6 Shielded Patch Panel”

Rate Your Satisfaction*