Burner heating coil for steam pressure washer

Customize: Burner heating coil for steam pressure washer

Short Description: We customize manufacture various of Pressure Washer Burners Heating Coil,Pressure Washer Steam Cleaner Jet Wash Heating Burner Boiler Coil ,Vapour cleaning machine sprial coil.As spare repairing replacement part, they are put in a metal housing which is named with combustion chamber of a steam cleaner and used as heat exchanger,can work with most of hot water high pressure heating washers,like Karcher burner,Lavor burner,Fasa burner,Sirio burner,WAP boiler,Amtex machine,Nilfisk ,Alto, Kew,etc.Made from stainless steel 304,has good performance to transfer heat to the water through the pipe of the coil.Can withstand high pressure up to 2000psi,14.5Mpa,and little pressure-drop loss.

Materials:Stainless steel grade 304;

Size/Dimension:customized;

Place of origin: China , Sell to worldwide.

Advantage :

√ Made of seamless stainless steel(304) tube,can stand high pressure.
√ Can processed into any shape and size by your design,customized dimension is accepted.
√ Nice looking,the surface is polished and reached food grade standards.
√ Smooth inner surface and the water can circulate in the coil,small pressure-drop loss;
√ Customizable size as you required.

Feature :

• Stainless steel have strong material strength ,the tensile strength is better than other materials ,
• Stainless steel heat exchanger have many advantages ,such as strong pressure ,stability material properties ,high heat transfer efficiency ,wouldn’t contaminate medium and without refrigerant leakage .
• Stainless steel has excellent temperature resistance , can prevent Frost Crack evaporator in the low temperature ,will safely working at minus 270 Deg C to 400 Deg C.
• Stainless steel has good mechanical properties and good hot work ability for stamping and bending ,no heating treatment hardening.

Application :
This product is widely used as heat exchange for vaporize liquid propane,and for most of hot water high pressure heating washers,like Karcher burner,Lavor burner,Fasa burner,Sirio burner,WAP boiler,Amtex machine,Nilfisk ,Alto, Kew,etc.

IF YOU DON’T FIND THE COIL YOU ARE LOOKING FOR.PLEASE USE THE FOLLOWING GUIDELINES TO HELP US HELP YOU.

1. WHAT BRAND AND MODEL?
2. WHAT GPM?
3. HORIZONTAL OR VERTICAL?
4. OIL OR GAS HEATER?
5. OUTSIDE DIAMETER OF HOUSING?
6. OUTSIDE DIAMETER OF COIL?
7. CENTER TO CENTER LENGTH ON INLET AND OUTLET?
8. LENGTH OF COMBUSTION LINER PAST INLET?
9. OVER-ALL LENGTH OF COIL WITH METAL JACKET INCLUDED?
10. POSITION OF INLET AND OUTLET COMPARED TO ONE ANOTHER?
11. CENTER OF OUTLET TO BOTTOM OF COIL?
12. NUMBER OF COIL LAYERS INSIDE?
13. INSIDE DIAMETER OF COIL?

NOTICE! MANUFACTURERS CHANGE COIL DESIGN PERIODICALLY, USING THE SAME MODEL
NUMBERS. SINCE FARLEY’S, INC. GETS THESE CHANGES FROM YOU, THE DISTRIBUTOR, IT IS THE
DISTRIBUTOR’S RESPONSIBILITY TO INFORM FARLEY’S, INC. OF ANY CHANGES IN DESIGN, ETC.
WE WILL NOT BE RESPONSIBLE FOR WRONG MEASUREMENTS.