Refrigerants: R407C, R22, R404A, R410A, R134a Design temperature: ¨C196 – +200ºC/¨C320 – +392ºF Standard design pressure: 30 bar/435 psi Test pressure: 45 bar/653 psi Standard plate material: AISI 316L Brazing material: Copper Other configurations available on request
Envelop thickness of fins A (MM )
Weight(KG)
Volume of one-side passage(L)
Effective working area(M 2 )
9+2.3N
0.4+0.04N
0.010(N-2)
0.015X(N-2)
Optional connections of Model B3-015
Type of connections
Model of connections
Taper male thread connection
RM104S/RM106S/R2102
Refer to the list of connections for detailed dimensions
Parameters of Model B3-015
Working area per plate
0.015(m 2 )
Designed pressure
1.0Mpa
3.0Mpa
Testing pressure
1.5Mpa
4.5Mpa
Working temperature
-160 to 200
Max flowrate of water side
6 m 3 /h
Max plate assembly
80 PCS
Type of plate passage
D
Plate material
Stainless steel 304, 316L
Mounting opinion
Bolts
Application
Wall-mounted Heater, Water Heater, Low Temperature Testing Equipment, Small-sized Refrigeration Equipment, etc.
Brazed heat exchanger technology description The Brazed heat exchanger is one of the most effective methods to transmit heat between the medium. The whole set of Brazed heat exchanger is composed by the ripple channel board, they combine together to form the complex Brazed heat exchanger channel. The cold and hot media assignment is completed through these channels. The cold and hot media is separated in both sides of the corrugated sheet, close as far as possible but not mixing; When they flow shoulder to shoulder, the quantity of heat is transmitted from one medium to another medium. The product concept based on modular as well as the parts that definitely can be customized, we always can find the most suitable solution for the application of each kind of heat exchanger.Brazed heat exchanger structure principle The Brazed heat exchanger on the whole is composed of a group of corrugated pipeline board between front and back baffles. The baffle groupware of Brazed heat exchanger is composed of seal board, seal ring and baffles. The Brazed heat exchanger connector type can be customized according to specific request of the market and the application domain. In the vacuum Brazed process, each contact point between the slab and the filling material (braze welding solder) can form a weld point. Using such a design, it can make the heat exchanger which is composed of two different channels or the return route. The seal board is used in the crevice between seal baffle and the first and last channel board. The quantity of baffles is decided by the type, size and pressure rank and so on. Some are loaded with the seal ring, used in the crevice between the sealing channel board and the baffle. Some seal rings and the baffle as well as the first or the last channel boards combine a whole.Brazed heat exchanger passage type In a Brazed heat exchanger, the slab number usually reaches several dozens pieces. The liquid flow of Brazed heat exchanger between boards can be combined neatly according to the concrete service condition. Generally there are all kinds of combination of single-flow and multi-flow. If both sides medium are even single-flow, it is available to make one side medium as the single-flow and the other side medium as the double-flow, and also both sides medium as the different multi-flow combination. The standard combination of Halley Brazed heat exchanger is that both hot and cold sides are single-flow, and can be customized to be multi-flow heat exchanger as per the customer request.
Send us your enquiry message or review.You also can write email to us: sale@smartclima.com or info@smartclima.com . Smartclima team will reply you within 24 hours.
Enquiry or Review on “BPHE B3-015 Brazed Plate Heat Exchanger” Cancel reply
to 200
Enquiry or Review on “BPHE B3-015 Brazed Plate Heat Exchanger”