Battery Charger Control Module XH-M602

[content id=”32159″][content id=”32342″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M602:

Item: Battery Charger Control Module XH-M602

1.For DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board
Manufacturer: Smartclima
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Battery Charger Control Module XH-M602 ”

Models & Details for “Battery Charger Control Module XH-M602 ”

This product is suitable for 6-60V battery charging control, can be set free to start charging voltage and stop charging voltage! In the IN input charger 660V voltage, in the OUT terminal battery, for example, set 12V start 15V stop when the voltage is below 12V when the relay is closed to the charger charging voltage to the battery, when the charge voltage is greater than 15V Relay off to stop charging, can be used in household chargers, solar, wind turbines

Product Introduction:
1.Name:numerical control battery charging control module
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Using Method:
1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value
3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings

Buying Guide to “Battery Charger Control Module XH-M602 ”

• The module is available for retail and wholesale;
• The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
• Accept bulk order with Container delivery;
• Please contact us to email: econtrol@smartclima.com or sale@smartclima.com ,we can supply a favourite item you need.

---

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M602