smartclima logo

Admin-smartclima, Author At Smartclima

Author: admin-smartclima

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC

thermal-expansion-valve-stf-series-rte5nc-rte3nc-rte10nc-rte12nc

For sale! Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC 1

 Order Or Inquiry On “Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC”

 

Models & Details for “Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC”

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC 2

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC 4

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC 6

Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC 8

How to purchase “Thermal expansion valve STF Series RTE5NC RTE3NC RTE10NC RTE12NC ”

  • The item is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us by Online inquiry (click here)
  • Or contact us to email:  hvac@smartclima.com

Oil drum heating belt heater silicone rubber heating stripe belt

For sale! Oil drum heating belt heater silicone rubber heating stripe belt

Oil drum heating belt heater silicone rubber heating stripe belt 10

 Order Or Inquiry On “Oil drum heating belt heater silicone rubber heating stripe belt”

 

Models & Details for “Oil drum heating belt heater silicone rubber heating stripe belt”

Oil drum heating belt heater silicone rubber heating stripe belt 12

Oil drum heating belt heater silicone rubber heating stripe belt 14

Oil drum heating belt heater silicone rubber heating stripe belt 16

By heating the surface of the oil drum or liquefied gas tank, the viscosity of the objects in the barrel decreases evenly. The heater is equipped with a thermostat to adjust the temperature. The two ends are equipped with springs and hooks, which are easy to install, energy-saving and safe. This product Fast heating, uniform temperature, high thermal efficiency, anti-aging and long service life.

Product Usage:

By heating the surface of the oil barrel, the liquid and solidified in the barrel can be easily taken out, such as the adhesive, grease, asphalt, paint, paraffin, oil and various resin raw materials in the barrel. Reduce the power of the pump, so this heating unit is not affected by the season.

 Product Features:

A temperature sensor is installed on the surface of the heater, which can directly control the temperature (30-150 degrees) through temperature adjustment.

Technical parameter:

1. Maximum temperature resistance of insulating material: 250℃

2. Maximum operating temperature: 200℃

3. Compressive strength: ≥AC1500v/5s

4. Insulation resistance: ≥50 MΩ

5. Power deviation: ±5

Oil drum heating belt heater silicone rubber heating stripe belt 18

Oil drum heating belt heater silicone rubber heating stripe belt 20

How to purchase “Oil drum heating belt heater silicone rubber heating stripe belt ”

  • The item is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us by Online inquiry (click here)
  • Or contact us to email:  heating@smartclima.com

Round spiral air duct and fittings

Round spiral air duct and fittings 22

Round spiral air duct–Type without insulation coating

Round spiral air duct Round spiral duct2 Round spiral duct3 Round spiral duct4 Round spiral duct5 Round spiral duct6 Round spiral duct7 Round spiral duct8 Round spiral duct9

 

Made from galvanized steel sheet,with diameter

80mm,100mm,125mm,150mm,160mm,180mm,200mm,220mm,250mm,280mm,300mm,315mm,350mm,355mm,380mm,400mm,420mm,450mm,480mm,500mm,550mm,600mm,630mm……to 1700mm.

Send email to ventilation@smartclima.com to  ask for more details on the type device which you are interested in.

                                                                                                                                                                                          

Round spiral air duct –Type with insulation coating

Round spiral duct with insulation1 Round spiral duct with insulation2 Round spiral duct with insulation3

Made from galvanized steel sheet,with diameter

80mm,100mm,125mm,150mm,160mm,180mm,200mm,220mm,250mm,280mm,300mm,315mm,350mm,355mm,380mm,400mm,420mm,450mm,480mm,500mm,550mm,600mm,630mm……to 1650mm. There are two thickness as insulation:25mm insulation coating and 50mm insulation coating.

Send email to ventilation@smartclima.com to  ask for more details on the type device which you are interested in.

Plastic Butterfly Duct Damper valve

Plastic Butterfly Duct Damper valve 24

Plastic Butterfly Duct Damper valvePlastic Butterfly Duct Damper valve,Round type inline air valve,operate by manual.

For industrial and institutional corrosive fume exhaust and drain applications.Also named anti-corrosion Volume Control Damper for round air duct,circular duct inline Plastic Butterfly Duct Air Volume Control Air Damper,butterfly damper PVC,(Notice it is used to control air volume only,couldn`t be used as fire controlling damper). Designed with control knob and flange,hand-controlled type(If required,can also do electrical type),2 inch,3 inch,4 inch,6inch,8 inch,10 inch,etc.It is an important fitting accessory used in industrial plant or civil construction of ventilation, air conditioning and air purification project,works for the construction of exhaust ventilation system. Generally used in air conditioning ducts, ventilation pipes, by regulate the angle of blade or baffle to adjust the air flow volume in the duct.The material PP or PVC can prevent condensation water,anti-corrosion,and with good insulation performance.

Materials:PP (Polypropylene) or PVC (Polyvinyl chloride),meltable and has weldability,feature of anti-corrosion;

Size Available:round type,to insert pipe Φ63mm,Φ75mm,Φ90mm,Φ110mm,Φ160mm,Φ200mm, Φ250mm, Φ315mm (Inside diameter),all stock are available.(For electrical type, size are Φ110mm, Φ160mm,Φ200mm, Φ250mm, Φ315mm,Φ355mm,Φ400mm,Φ500mm (Inside diameter)

Type: Manual type or Electrical type,for round duct;

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Plastic Butterfly Duct Damper valve

Manual version- “Plastic Butterfly Duct Damper valve”

Damper-valve-partsgood-quality-damper

Features&Advantage :

√ Made of plastic PP or PVC,can prevent condensation water.
√ Made of plastic PP or PVC,light weight and anti-corrosion.
√ Grey color,same as PP pipe and pipe fittings;
√ Many size models,widely fit for most of duct pipes.
√ For round or circular air duct.
√ Good insulation performance,reduce energy loss.
√ Resistant to abrasion, heat and corrosion.Ideal for situtations where resistance is the prime concern for the damper.
√ Good sealing performance to prevent the air from leakage.
√ Separable design:main body,screw nut and handle is separable,for you to reconstruct for some project;
√ By screwing the plastic nut,can adjust the stop plate`s loose or tight to stand at a required position or angle;
√ Meltable and weldable: can incorporate PP pipe,PP Tee,PP elbow by melt way;
√ Thickness 4mm,can withstand high pressure(For DN315,thickness 5mm).
√ Easy installation and quick working.

Application :
This product is widely used in a variety of applications,mainly for ventilation project,HVAC system,round ventilation duct, chimney, VAV box, air handler, or other air handling equipment,to stops or regulates the flow of air in the circular duct,from media transfer to isolation and venting, and also for water project.

Types,Dimension and Parameter:

  • DN50 ( 2″,Model Φ63,to insert OD63mm plastic pipe ),long 120mm;
  • DN65 (2.5″,Model Φ75,to insert OD75mm plastic pipe ),long 130mm;
  • DN80 (3″,Model Φ90,to insert OD90mm plastic pipe ),long 140mm;
  • DN100 (4″,Model Φ110,to insert OD110mm plastic pipe ),long 155mm;
  • DN150 (6″,Model Φ160,to insert OD160mm plastic pipe ),long 200mm;
  • DN200 (8″,Model Φ200,to insert OD200mm plastic pipe ),long 240mm;
  • DN250 (10″,Model Φ250,to insert OD250mm plastic pipe ),long 250mm;
  • DN315 (12″,Model Φ315,to insert OD315mm plastic pipe ),long 320mm;
  • DN355 (14″,Model Φ355,to insert OD355mm plastic pipe );
  • DN400 (16″,Model Φ400,to insert OD400mm plastic pipe );
  • DN500 (20″,Model Φ500,to insert OD500mm plastic pipe );
  • … …

all-PP-duct-air-dampersPlastic Butterfly Duct Air Damper valve dample with strong plate plastic Damper with handleplastic-dampers-with-stop-blade

When you are going to order these dampers,please check following images,especially carefully check if the Inside Diameter fit your pipe.

2inch-plastic-damper-by-manual 2.5inch-plastic-damper-by-manual operate 3inch-plastic-butterfly damper by hand adjusting 4inch-plastic-air regulator 6inch-plastic-duct air adjust 8inch-Air Volume Control air Damper by manual 10inch-plastic-VCD by hand 12inch-Polyproyhlene manual adjusted air damper

Plastic Butterfly Duct Damper valve 26

16inch manual damper

20inch manual damper

Electric version 1-Full open or Full closed- “Plastic Butterfly Duct Damper valve”

Two status: Full open or Full closed.

Electric-Damper-valve
Plastic Butterfly Duct Damper valve 28

Parameters: Rated current: ≤0.1A,
Rated voltage: AC220V
Output torque: 8N / m
Running time: 5S (on, off)

Electrical type has folloing sizes:

  • DN100 (4″,Model Φ110,to insert OD110mm plastic pipe ),long 155mm;
  • DN150 (6″,Model Φ160,to insert OD160mm plastic pipe ),long 200mm;
  • DN200 (8″,Model Φ200,to insert OD200mm plastic pipe ),long 240mm;
  • DN250 (10″,Model Φ250,to insert OD250mm plastic pipe ),long 250mm;
  • DN315 (12″,Model Φ315,to insert OD315mm plastic pipe ),long 320mm;
  • DN355 (14″,Model Φ315,to insert OD355mm plastic pipe );
  • DN400 (16″,Model Φ400,to insert OD400mm plastic pipe );
  • DN500 (20″,Model Φ500,to insert OD500mm plastic pipe );

Electric version 2-Angle of valve leaf can be controlled and regulated – “Plastic Butterfly Duct Damper valve”

The following valve can control and regulate the air flow volume depends on the demand.

Angle of valve leaf can be controlled and regulated - “Plastic Butterfly Duct Damper valve” air volume can be controlled and regulated

Parameters: Rated current: ≤0.1A,
Rated voltage: AC DC24V,

Electrical type has folloing sizes:

  • DN100 (4″,Model Φ110,to insert OD110mm plastic pipe ),long 155mm;
  • DN150 (6″,Model Φ160,to insert OD160mm plastic pipe ),long 200mm;
  • DN200 (8″,Model Φ200,to insert OD200mm plastic pipe ),long 240mm;
  • DN250 (10″,Model Φ250,to insert OD250mm plastic pipe ),long 250mm;
  • DN315 (12″,Model Φ315,to insert OD315mm plastic pipe ),long 320mm;
  • DN355 (14″,Model Φ315,to insert OD355mm plastic pipe );
  • DN400 (16″,Model Φ400,to insert OD400mm plastic pipe );
  • DN500 (20″,Model Φ500,to insert OD500mm plastic pipe );

Buying guide to “Plastic Butterfly Duct Damper valve”

  • The fitting damper  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: ventilation@smartclima.com

General Knowledge on “Plastic Butterfly Duct Damper valve”

Air damper means the valve or a plate which can prevent or adjust/regulate air flow volume in the pipe or ventilation duct, chimney pipe, VAV box device, air handling machine, or other air processing equipments. This Plastic Butterfly Duct Damper valve is manufactured for suiting for flowing all corrosive and non-corrosive gas environments, high and low temperature service as well.Plastic Butterfly Duct Damper valve provides long-lasting, cost-effective solutions for industrial and institutional corrosive fume exhaust and drain applications.

  • PP air damper is non-toxic, anti-corrosion,health, stand high temperature;
  • Anti-rust: PP air damper can withstand PH value in a wide range of temperatures, high concentrations in the range of 1 to 14 acid and alkali corrosion;
  • Wear-resistant, non-fouling: PP air damper has uniform and smooth tube inner wall small,small flow resistance and no scaling;
  • Reducing vibration and noise: PP air damper has excellent insulation properties, can significantly reduce the vibration and noise caused by the flow of liquid.
  •  anti-cracking: PP material is good elasticity,which makes pipes and fittings sectionally together with the expansion of the liquid frost without bursting.
  •  anti-condensation, less heat loss: PP material is a poor thermal conductor, reducing condensation and reduce heat loss.
  • Easy Installation: PP damper valve is light weight, easy to install and operate, meltable and has weldability.
  • Long service life: PP duct damper valve systems can serve 50 years.

Manual Hairpin Tube Bender,Manual pipe bender with Mandrel

Manual Hairpin Tube Bender,Manual pipe bender with Mandrel 30

For sale! Manual Hairpin Tube Bender,Manual pipe bender with MandrelManual Hairpin Tube Bender,Manual pipe bender with Mandrel9

(Notice: this device is only for bending copper pipe),It is developed to fabricate and process tight metal bends in thin wall tubing without the space issues and expense of a full blown automatic mandrel bender.The device machine by hand can bend up to Φ22.22 OD copper tube.With dies for bend different diameter pipes.It is a must-have device to fabricate copper tube bending.

Size/Dimension: You can choose the machine with going different dies as following: 1/4″,5/16″,3/8″,1/2″,5/8″,3/4″,7/8″,1″,1-1/8″, or other customized size.

To process: round copper tube.

Place of origin: China , Sell to worldwide.

 

 Order Or Inquiry On “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel”

 

Models and Details for “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel ”

Application :
This device is widely used for bending copper tube in manual,a must-have equipment for your refrigeration work.

Manual machine for Tube Bending Manual Hairpin Tube Bender,Manual pipe bender with Mandrel9 Manual pipe bending equipment with Mandrelcoil stainless steel pipe coil copper pipe with mandrel bender bend stainless steel tube bent copper tube

 How to purchase “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel”

  • The machine  is available for retail and wholesale;
  • The device takes heavy weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Notice: this device can do with copper tube and aluminium tube only,  for bending mild tube or stainless steel tube,please check our other devices here.
  • Before order, please provide the following parameters: Bending radius,tube outer diameter and tube wall thickness.
  • Please contact us to email: sale@smartclima.com

General Knowledge on “Manual Hairpin Tube Bender,Manual pipe bender with Mandrel”

Why the Manual pipe bender with Mandrel is better than that without mandrel?

Pulling technology that with mandrel core-pulling mechanism, to let you can bend smaller radius workpieces without wrinkling, the processed workpiece has better quality with mandrel core-pulling mechanism.

What is the role of Mandrel bar in the bender?

All the pulling mandrel bender should have mandrel bar, as opposed to the traditional pipe, with the mandrel ,you would not filling sand into the pipe, it is more easy to use, fast, and better results,can prevent contention and curved lines.

How much time shoud take when change the die?

Usually,you can change the die for different radius within 10 miniutes or less.

How to maintenance?

Add oil often when process to bend pipe,which can let you get the better qulity bending tube.

What material is better to use as  mandrel bar in pulling draw mandrel bender ?

I do not know your frequency of use, but generally core pulling mandrel bender`s pumping working conditions are not harsh, generally with quenched and tempered steel surface hardening can be added. Not need expensive tool steel.

Can I buy spare parts or tools parts after I buy the bender?

Yes,of course,you can buy any part or tool pieces at any time.For die,you also can buy,but need two weeks to customize.

Graphene electric infrared heating film

Graphene electric infrared heating film

For sale! Graphene electric infrared heating filmGraphene electric infrared heating film

  • [Parameters & Peformance]  220V, 220W/㎡.  Width can be 50cm,80cm,100cm and length is 100meters per roll. Size can be customized.
  • [Features & Advantages] After a number of tests, the wavelength is 9.2 microns, which is an infrared ray that is beneficial to the human body.It can be absorbed by the human body and enhance human immunity;  In the 2100-hour aging test, the shrinkage rate was less than 2%. After the test, the electric heating film ran continuously when the surface temperature reached 40°C.
    For 26,000 hours, the performance and size remain the same, while still maintaining its soft and durable performance.
  • Place of origin: Supplied by China Manfacturer directly, Made in China, can export to worldwide.

 Order Or Inquiry On “Graphene electric infrared heating film”

 

Models & Details for “Graphene electric infrared heating film”

The low-temperature electric heating film is a kind of translucent polycrystalline film that can heat up after being energized. It is processed by a special ink and metal carrier strip that can conduct electricity.
It is made by hot pressing between insulating poly-lin films. When working, the electric heating film is used as the heating element to send the heat into the space in the form of radiation, so that the human body can use the electric heating film as the heating element.
And the object is warmed first, and its comprehensive effect is better than the traditional convection heating method.

Graphene electric infrared heating film

Graphene electric infrared heating film 32

Graphene electric infrared heating film 34

Graphene electric infrared heating film 36Graphene electric infrared heating film 38

 

graphene-electric-infrared-heating-film low price graphene-electric-infrared-heating-film free shipping graphene-electric-infrared-heating-film size and parameter graphene-electric-infrared-heating-film types and models graphene-electric-infrared-heating-film China factory graphene-electric-infrared-heating-film seller graphene-electric-infrared-heating-film manufacturer graphene-electric-infrared-heating-film supplier

How to purchase “Graphene electric infrared heating film ”

  • The item is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us by Online inquiry (click here)
  • Or contact us to email:  heating@smartclima.com

 Notice to use:

1. Thermostats must be used when laying electric heating films on the bed, exposed meters, etc. It is recommended that the electric heating film should not be covered (within 3 cm of Bozi that is too thick).
Or objects that affect the effective heat dissipation of the product. When the electric heating film is turned on, the product cannot be covered for a long time, such as heavy clothes, quilts, etc.
An object with a positive blocking electric heating film that effectively emits heat. So as not to affect the heat dissipation of the product, which will cause the temperature of the electric heating film to be too high, and the heat will gather to produce high temperature. The following reaction
The high temperature resistance of the film is 60-70 degrees, and it will cause damage beyond the temperature range, which will cause damage to the electric heating film, the floor, and the floor leather. People when sleeping at night
On the product, it can be used normally. When you get up, when you leave the product or when you go out, you need to turn off the power.

It is strictly forbidden to place objects that are not conducive to heat dissipation in the probe position of the thermostat, otherwise it will cause inaccurate temperature control and unbalanced temperature of the entire electric heating film. (The probe position is covered
The electric heating film under the cover does not dissipate heat and gathers temperature. The probe senses the temperature to the set temperature (such as 28 degrees), but the other areas of the film do not actually reach the set temperature.
The set temperature is 28 degrees).
Static electricity in the use of electric heating film is a normal phenomenon.
In daily life, people often encounter this phenomenon. Static electricity is a kind of electric charge in a stationary state.

2. The electric heating film can be laid before and after the decoration. It can be laid on the floor or ceramic tiles, and it can also be laid under the floor. First of all, the laying surface needs to be kept flat and free of impurities.
Objects, floor leather can be laid on the electric heating film, or (thinly) touched. In the use of electric heating film, there must also be certain requirements for the heat permeability of the floor, namely: permeability.
It can be used for ground consolidation with a heat rate of more than 85%. In other words, the thinner the heat dissipation, the better.
An insulation layer, an electric heating film, and a waterproof cloth need to be laid under the floor. The ground must be covered with a heat insulation layer. In cold areas, you can consider increasing the thickness of the heat insulation layer, because every
The thermal insulation, heating and cooling of each room are different, and the effect of this will be better.
It is recommended to choose a brand floor for laying the floor. The thickness is preferably around 0.8. If it is too thick, the heat transfer is not good, it is not energy-saving, and the environmental protection index of the brand floor is relatively high, so it is not
It is necessary to worry about the problem of harmful gases. If there is an odor, it should be powered off and stopped in time, the cause should be accurately identified in time, and the treatment should be carried out in time to ensure safe use. (An
When installing the floor, you can consult the floor seller to see if floor heating products are available)
Keep it clean when laying (cutting) floors or floor tiles on the electric heating film, and do not leave debris, sharp wooden nails, nails, etc. on the electric heating film.,
So as not to damage the electric heating film. It is recommended to choose furniture with legs for the electric heating film. (If there is furniture with or without legs, it needs to be given out) to ensure that the heat is fully dissipated.,
It is forbidden to drill holes, nail nails and other destructive acts in the heating area of the electric heating film, which will cause partial inactivity or leakage of protection, and open the operation empty.

3. When cutting the electric heating film, it must be cut in accordance with the position of the cutting line. The electric heating film should be flat when laying, and it is strictly forbidden to be hypoallergenic. The electric heating film needs to be fixed with scotch tape.
Prevent the electric heating film from moving in series, and heavy use is strictly prohibited when the electric heating film is laid. (The longest laying of a single electric heating film with 500mm specifications is 8 meters, and the longest laying with 800mm specifications is 6 meters.)
Cut to, the 1000mm specification is up to 5 meters long and cut. ) The electric heating film can be rolled, but it cannot be folded. If the upper and lower flow strips (copper sheets) of the electric heating film are damaged .
Stepping on it (folding or breaking) can cause ignition, so you should be extra careful when installing this part.

4. The terminal of the electric heating film and the other end must be completely sealed with high-temperature, waterproof and insulating treatment, sealed with insulating putty, and then used for secondary use with electrical tape.
Insulation. Please understand this product in detail for self-installation. If there are any problems caused by self-installation, it has nothing to do with quality. It is caused by construction problems. We will not be liable.
Responsible.
Determine the load of the electric heating film according to the area and power of the electric heating film laid, determine whether the indoor power supply can withstand the maximum load of the electric heating film, and configure the corresponding specifications for international high resistance
Warm wire. (Below 10 square meters, 2.5 national standard lines can be used, and 4 square international lines can be used for 10-16 square meters. Can use 16-18A plug) such as: room settings
With a power of 2500 watts and 3500 watts, the room electric heating film group is connected to a string line, and a 2.5 square-4 square BVR soft tuning line is sufficient, but the film group finally comes out.
The main line of the thermostat connection should choose a power cord of not less than 4 square meters, leaving room for the wire diameter to avoid heat generation and other phenomena.
The life of the thermostat is 3-6 years. Due to the different frequency and frequency of use, it needs to be replaced.
When leaving for a short time or not in use, a thermostat should be used to adjust the temperature to 10 degrees. When it is completely turned off and turned on again, the temperature will be slower and the energy consumption will be higher.,
And it will affect the service life of the system.

5. To use this product, first check whether the incoming line matches, so as not to overload the line and cause accidents!
Calculation formula
Example: 3.5meters * 4 meters = 14 square meters
14 square meters*220w=3080w in total
Because the lines of new houses and old houses are different, you can find a local electrician to calculate

 

General Knowledge on “Graphene electric infrared heating film”

Graphene is a single-layer carbon surface material exfoliated from graphite materials, and it is a two-dimensional structure of carbon. The thickness of this graphite crystal film is only 0.335 nanometers. When 200,000 films are stacked together, it is only as thick as a single hair strand. It was first discovered in 2004 by the team of Costiano Voschev and Andre Geim of the University of Manchester. The advent of graphene has caused a worldwide research boom. It is not only the thinnest of the known materials, but also very strong and tough; as a simple substance, it transfers electrons faster than known conductors at room temperature.

Nowadays, the application of graphene has been very extensive, such as: graphene batteries, graphene electric heating film and other products. However, graphene batteries have been hot for many years without a good solution, and they have not been popular. Graphene electric heating film is quite mature among graphene products, and has been applied to the electric heating industry by many companies. Graphene floor heating is Very famous, especially loved by northern residents!

Why should graphene be added to the electric heating film? It is very simple. Graphene is a new type of material. As soon as graphene came out, it attracted the attention of the whole world. The electron mobility in graphene is much higher than that in silicon. Therefore, graphene floor heating is quite energy-saving and high-heat conversion. The technology of this brand in R&D and design is very novel and very individual.

Advantage of Graphene electric infrared heating film :

1. Fast heat generation , the set temperature can be reached within 15-30 minutes after power on, the floor surface heats up, and the heat is even;

2. Long service life, no attenuation in 50 years ;

3. Maintenance-free, basically zero maintenance ;

4. Energy saving, the conversion rate of electric energy and heat energy is as high as 99%;

5. Installation is quick, a house of 100 square meters can be completed in one day;

6. Intelligent control, which can be opened and closed at any time, time-sharing, household-sharing, and pattern-sharing, which is very convenient;

7. Healthy, the 8-15 micron far-infrared light waves emitted by Brownian motion are called “life light waves” by scientists, which can promote blood circulation and have physical therapy effects on the body.

Shortcoming of Graphene electric infrared heating film:

As a new type of heating method, the disadvantages of graphene floor heating are: first, the installation cost is relatively high; second, the market popularity and standardization are not enough, and some use carbon fiber and carbon crystal film to pretend to be graphene.

 

Universal Air conditioner control system QD-U03C+

Universal Air conditioner control system QD-U03C+ 40

Universal Air conditioner control system QD-U03C+

Universal Air conditioner control system QD-U03C+

Short Description: Universal Air conditioner control system QD-U03C+ is always used to control air conditioner system and heat pump system

  • 5 working mode;
  • High,Medium,Low,three speed control;
  • Accurate and stable temperature control;
  • Accurate and stable auto fan
  • Timer on/off;
  • Sleep;
  • More… …

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Universal Air conditioner control system QD-U03C+
Models & Details for “Universal Air conditioner control system QD-U03C+”

Feature :

1、5 Working Modes

2、3 Fan Speed

3、Accurate And Stable Temperature Control

4、Accurate And Stable Auto Fan

5、Auto-restart Function

6、Double Sensors

7、Timer on/off

8、Sleep Function

9、Defrost Automatically

10、Outdoor Fan is Controlled Independently

11、Compressor Project Timer For Its Run And Stop

12、Prevent Cold Wind In Heating Mode

13、updated reciever,good looking appearance,show intuitional

14、updated transformer,quick plug, easy for installation

Application :
This product is widely used for air conditioner system and heat pump system,to control the system working automatically.

QD-U03C+-package QD-U03C+-functionQD-U03C+ functionQD-U03C+ componentsQD-U03C+ packingQD-U03C+ wiring

Avoid strong light before IR receiver;
The common pins of swing socket are 12V output;
The common pin of step motor should be inserted into one of the common;
pins of swing socket.lf the direction of step motor is wrong.insert the common pin of step motor to other common pin of swing socket.

QD-U03C+ manual

Manual of “Air conditioner control system QD-U03C+”:
Note:When the compressor is shut off,it needs 3 minutes to restart.
Mode selection key:Select working mode.When in auto mode.the system will work like heat mode if the room temperature
is below 21℃,or work like cool mode if room temperature is up than 27℃.
Fan selection key:Select fan speed.The fan speed will be low when in dry mode,or in heat mode but the compressor is shut
off,or in heat mode but the compressor working time less than 3 minutes. In auto fan mode.the fan speed
will be high if the difference of setting and room temperture big than 4℃,will be low if the difference less
than 2℃.
Temperature setting keys:Be able to set from 16℃-30℃.It will not response in auto mode or dry mode.
Timer selection key:Select timer on.timer off or no timer.
Timer time setting keys:Set 1-16 hours.
Swing key:Select swing on or off.
Sleep key:Will shut off in 8 hours.
Too cool/Too warm keys: Only effective
in auto mode-Be able to adjust the setting temperature 1℃ up/down from 25℃ when depressing once the key
ON/OFF key:Control on or off.

Buying guide to “Universal Air conditioner control system QD-U03C+”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: airconditioner@smartclima.com

Kitchen Range Hood Exhaust Duct

Kitchen Range Hood Exhaust Duct 42

Kitchen Range Hood Exhaust Duct

Item: Kitchen Range Hood Exhaust Duct

Short Description:Plastic air duct for range hood ventilation,Kitchen Range Hood Exhaust Duct,Cooker Hood Ventilation Pipe.It is made from good quality plastic PP with thicker wall.It is widely used as Kitchen Range Hood Exhaust Duct ,flexible and durable

Main Features: White;Flexible; Many sizes;Durable using;

Dimension:Dia.100mm x L 1.5m; Dia.150mm x L 1.5m;Dia.160mm x L 1.5m;Dia.180mm x L 1.5m;Dia.200mm x L 2.35m;

Place of Origin: China, Sell to worldwide

 Order Or Inquiry On “Kitchen Range Hood Exhaust Duct”

 

Models and Details for “Kitchen Range Hood Exhaust Duct ”

Kitchen Range Hood Exhaust Duct plastic air duct for range hood flexible air vent for kitchen range hood exhausting many size pipe for ventilation

 How to purchase “Kitchen Range Hood Exhaust Duct”

 

  • The product is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider international air freight as cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: ventilation@smartclima.com

Rubber Grommets For Refrigeration pipe

Rubber Grommets For Refrigeration pipe copper tube

Rubber Grommets For Refrigeration pipe

For sale Compressor rubber Grommets for  refrigerant compressor copper tube 1/4″,3/8″,1/2″,5/8″,3/4″, 1inch…,Refrigeration copper pipe rubber add-on weight block.

The rubber grommets is used as counterweight for compressor copper pipe system,including HVAC compressor of air conditioner,freezer,fridge and heat pimp.In the refrigeration pipe system,engineer always use these rubber blocks to adjust the natural frequency of the refrigerant pipe,noise and vibration by changing the weight of the refrigerant pipe of the air conditioner, and so to avoid the resonance of the refrigerant pipe. The natural frequencies of different air conditioner pipes are different and therefore the weight of the rubber grommet must be matched with it. There are many sizes of refrigerant pipes for  many compressors in the HVAC system, but fewer types of counterweights can be find in market,and thus,Smartclima make many moulds to develop most of counterweight grommets (rubber add-on weight block) to adapte to the refrigerant pipe structure of different refrigerant pipes.
These parts are the best choice for your refrigerant compressor to remove noise and vibration.

 

  • [Material and Description] These Rubber Compressor Grommets For HVAC project are made of high quality rubber,anti-aged performance, and they are always used to reduce or remove vibration or working noise which comes from compressor installed in freezers,refrigerators,air conditioner outdoor unit and heat pumps. The working principle is to mount copper pipe( suction & discharge line from compressor) and thus avoid or reduce viberation from the HVAC system. And so,they are also named with rubber vibration dampening grommets,Rubber buffer kits,rubber antivibration blocks or adding weight for refrigeration copper pipe system. 
  • [Models and Available Size] For  refrigerant copper tube 1/4″,3/8″,1/2″,5/8″,3/4″, 1inch…(See below tables).
  • [Feature] Abrasion resistant;High in strength;Perfect finish.
  • [Application] This product is always used in refrigeration system,to mount copper pipe and thus avoid or reduce viberation from the system.Made from rubber,anti-aged performance.
  • [Customized Design] For special dimension, accept customized production.

Place of origin: Supplied by China Manfacturer, Made in China, export to worldwide.

 Order Or Inquiry On “Rubber Grommets For Refrigeration pipe”

compressor copper pipe rubber grommet counterweight block

Models & Details for “Rubber Grommets For Refrigeration pipe”

Compressor copper pipe system rubber grommets are specifically designed to absorb and remove the resonance sympathetic vibration from the compressors in HVAC Refrigeration system,and thus become the top-quality vibration isolation and dampening choice for copper tube when refrigeration compressor working.

Advantage :

√ Made from advanced rubber,can stand long years and anti-aged;
√ High in strength,and no easy to break;
√ Easy to use,just around the copper tube and tie it;
√ Various types and various sizes to meet your demand;
√ Customizable size if you required.

Application :
This product is always used in HVAC refrigeration system,to mount compressor`s copper pipe system and thus to avoid or reduce viberation from the HVAC system working.Made from qyality rubber,anti-aged performance.

Dimension and Parameter:
For mounting copper tube 1/4″,3/8″,1/2″,5/8″,3/4″, 7/8″, 1inch… (See below tables)

Rubber Grommets For Refrigeration pipe

rubber buffer for copper tube rubber add-on weight block for refrigerant compressor
Rubber grommets mounting on copper pipe used as damper kit to reduce or avoid vibration when refrigerating compressor working.
Rubber Grommets For Refrigeration pipe
Rubber grommets used on compressor pipe system to add weight to avoid vibration.

 

Rubber Grommets For Refrigeration pipe 44

Choice models:(some sizes are not shown in table,please contact us for all models and sizes)

ModelHole ID (mm)Grommet OD(mm)Height (mm)Suit for tube(mm)Weight (gram)
3001A5.530246.3540g/50g±3
3001B8.730249.5240g/50g±3
3001C11.5302412.740g±3
3001D15302415.8840g±3
3001G7.130247.9440g/50g±3
3001R5.52023617~22
3001S720257.517~22
2009A14554015.88200g±5
2009B11554012.7200g±5
2009C8.8555409.52200g±5
2009E17.5554019.05200g±5
2009F27.5554028180g/240g±5
258g21554022258g±5
160g21554022160g±5
PZK-027.830307.9472g±3
PZK-039.2535359.5275/ 115g±3
PZK-0412.7353512.7106g±3
PZK-097.83030 concentric 7.9440g±3
PZK-129.523030 concentric 9.5240g±3
PZK-1415.88404015.8875g/120g±3
PZK-1518.5454519.05150g±5
PZK-1693522953g±3
PZK-17940209.5258±3
PZK-187.530.5207.542.5±3
PZK-19930.5209.5242.5±3
PZK-20939449.52100±3
ModelHole ID (mm)Grommet OD (mm)Height  (mm)Suit for tube (mm)Weight
PZK-2111.7394412.7100±3
PZK-2293020942.5±3
PZK-2373040.5775±3
PZK-2493040.5972±3
PZK-2521605221400±10
PZK-2612.53036.512.568
PZK-277.53028.57.960
PZK-28930319.365
PZK-298.740359115g±5
PZK-3127706027410±10
NP-10282240835g±5
NP-0772040735g±5
NP-0552040535g±5
001411.5353512106g±3
00157.530217.9445±3
0016930289.5260±3
0066630216.546±3
XB-037.530.5207.542.5±3
XB-06930.520942.5±3
MD10026/
PZK-04
106g±3
10028-C11.5302412.732-36
10016-B8.730249.5242-46
10001-45g7.530217.9445±3

 

How to purchase “Rubber Grommets For Refrigeration pipe ”

  • Thess grommets are basically in stock available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with container delivery;
  • If you need customized dimension,please let us know.
  • Please contact us to email: hvac@smartclima.com

Maybe,you also will like the following item:

Rubber-Antivibration-Grommet-Pads-For-Double-Refrigeration-pipe
Double-Holes Rubber Grommet For Refrigeration Pipe System
Rubber Damping Pad For Refrigeration Copper Tube
Rubber Damping Pad For Refrigeration Copper Tube
Rubber Grommets For Refrigeration Compressor,Air Conditioner Compressor Rubber Damper Feet
Rubber Grommets For Refrigeration Compressor,Air Conditioner Compressor Rubber Damper Feet
Compressor Soundwraps Blanket
Compressor Soundwraps Blanket

Smartclima is a specilized company to supply various HVAC rubber products,including compressor rubber gromments, rubber spacer,compressor feet rubber mount,anout outdoor unit damping rubber feet mount.We have plenty of dimensions and different weight for each type,welcome to contact us.

Some knowledge for “Rubber Grommets For Refrigeration pipe.rubber add-on weight block ”

The air conditioning or refrigeration system copper pipeline inevitably will generate vibration when the compressor is running, especially the exhaust pipe and the suction pipe directly connected to the compressor. Conventional practice is to change the resonant frequency by adding rubber eccentric weights or Rubber Grommets(names Rubber Adding Weight) onto the copper tube. Another method is to absorb the vibration by wrapping the copper tube with the rubber piece(also names Air Conditioning Pipe Fittings Rubber Clump Weight), and also has the function of  add-weight.

The main material of the clay(Air Conditioning Pipe Fittings Rubber Clump Weight) is butyl rubber, which is made with other environmentally-friendly additives. It is a self-adhesive damping rubber sheet made by advanced technology. It adopts anti-adhesive paper layer and is covered with transparent film. It has strong adhesion to various materials, and has excellent weather resistance, aging resistance and water resistance. It seals and absorbs the surface of the adherend,protection and other functions.
Recently, we found some low-quality gromments made of bad rubber which will melt and fall off from the copper tube, thus losing the shock absorption effect. All air conditioner and heat pump manufacturers have technical requirements for the damping block as following that the grommets needs to meet the test requirements of weather resistance, heat resistance, high temperature fluidity, low temperature flexibility, copper tube corrosion and toxicity. So.be sure to test or purchase qualified products from top quality rubber manufacturers. You can’t buy goods or small workshops. The small details will affect the quality of the whole air conditioner system.
The brief requirements are as follows:
Heat resistance and cold resistance  
1.1 High temperature resistant damping damping block, required to test at -20 ° C ± 5 ° C and 115 ° C ± 5 ° C temperature for 72 hours, no flow, no hardening.  
1.2 Low temperature resistant damping damping block, required to test at -40 ° C ± 5 ° C and 50 ° C ± 5 ° C temperature for 72 hours, no flow, no folding without cracking. 
2. Metal corrosive   damping damping block has no corrosive effect on metallic copper, iron and surface coating (test temperature 100 ° C, time 7 days).
3. Toxicity and odor   damping The damping block is required to be non-toxic and odor-free (distilled water is colorless, odorless, non-toxic after being placed in 40 distilled water for 24 hours). 
4. The service life of damping block can be firmly tied or pasted, and there is no phenomenon of runny, shedding, hardening, brittleness, cracking and the like during the using period.

Foam generator cleaning machine

Foam generator cleaning machine
  • [Parameters & Peformance] 220V, 1500W,0.15-0.25Mpa
  • [Sizes] 340mm x 540mm X 940mm
  • [Color ] Blue
  • [Weight ]  30kgs.
  • [Features & Advantages] The foam machine is rich in foaming, and the foam wall-mounted effect is good,chemical foam can be reacted with oil stains, increase contacting time, and has better cleaning effect.
  • Place of origin: Supplied by China Manfacturer directly, Made in China, can export to worldwide.

Foam generator cleaning machine

 Order Or Inquiry On “Foam generator cleaning machine”

 

Models & Details for “Foam generator cleaning machine”

The kitchen hood cleaning foam generator can co-work with kitchen exhaust cleaning machine, which is specially developed for kitchen fume ducts in restaurants, hotels, equipping with an innovative brush and spray cleaner at the same time. The kitchen hood cleaning foam generator has efficient disinfection and cleaning capabilities.

quick remove oil and greasy

the foam machine is rich in foam

dissolve oil and greasy material

40 liters of the foam generator

easy to transport
Product NameFoam Generator
Voltage220-240V/110V
Power1500W
Pressure0.15-0.25mpa
Weight30kg
Size34*54*94cm
HosePVC, 5m*10mm
Standard Packing ListMain unit: 1pc Hose: 1pc

How to purchase “Foam generator cleaning machine ”

  • The item is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us by Online inquiry (click here)
  • Or contact us to email:  sale@smartclima.com