logo

Air Duct Detector Equipments

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>  Air Duct Detector Equipments

GX-08-2

Air Duct Detector Equipments–Video Inspection and Sampling Robot

It is equipped with automatic 360°-rotating color pitching camera with
high-intensity lighting, automatic jib-arm dust-collecting sampling unit, and the
driving device (caterpillar or 4 x 4 wheel) for the robot to move in the air duct.
Professionals may correctly differentiate the conditions inside the air duct
through observing the inside of air duct and the dust sample collected from the
inside of the air duct. They will customize the solution of cleaning and
sterilization and may attain the monitoring video information from the inside of
the air duct at any time and make the MP4.

Technical Data and Standard Configuration: 
Dimensions:420mm (Length) X 270mm (Width) X 180mm (Height)
Weight:8Kg
Voltage:24VDC;power:75W
Operating stroke:20 meters for standard configuration, can be extended to
100 meters according to requirements
Running method:4X4 wheel or dual-caterpillar driving
Parameters of kinematic performance:obstacle crossing >45mm, climbing
capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:520-line industrial color camera, electrically
rotating by 360°horizontal/90°pitching, four rear and front scatter-type
high-intensity lighting (LED light source with low temperature and long service
life)
Sampling method:Mechanical jib-type, automatically lifting, dust-collecting
sampling unit

 

GX-08-2B

Air Duct Detector Equipments–Quantitative Intellectual Sampling Robot

It is equipped with automatic 360°-rotating color pitching camera with
high-intensity lighting. The professionals may correctly differentiate the
conditions at any time inside the air duct and based on the monitoring video
information memory through the monitoring video system and make the MP4.
Meanwhile, they may start the intellectual control procedure to operate the
quantitative sampling. The system adopts micro vacuum power unit to collect
the dust and microorganism under the closed condition and in fixed quantities
(The collection is designed according to the standard modular multiplier with
accurate measuring). The powerful vacuum unit is specifically designed to
entirely collect the dust in the designated area. To ensure that the operation of one-off filter element and sampling probe is sterile, two kinds of sampling
probe, i.e. wiping type and scratching type, are provided for your option. The
robot will move in the air duct by the driving device and collect the sample any
where inside the air duct. It is an ideal option for the professional detection
agency

Technical Data and Standard Configuration:
Dimensions:340 mm (Length) X 240 mm (Width) X 200 mm (Height)
Weight:12.5Kg
Voltage:24VDC;power:225W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements.
Running method: Fully-enclosed dual-caterpillar driving (prevent the pollution
effectively)
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:520-line industrial color camera, electrically rotating by 360°horizontal /90°pitching, four rear and front scatter-type high-intensity
lighting (LED light source with low temperature and long service life)
Sampling method:fully-enclosed micro vacuum-power dust sampling and
sampling by wiping for option
Sampling time: 30s as the standard (subject to be adjusted according to
requirements)
Effective dimension of inspection: minimum inspection height: 220mm and
minimum inspection width: 260mm

Leave a Reply

Your email address will not be published. Required fields are marked *