logo

Air Duct Cleaning air hammer and air whip robot

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>> Robotic Air Duct Cleaning Equipments >>Air Duct Cleaning air hammer and air whip robot

Air Duct Cleaning air hammer and air whip robot

 

Air Duct Cleaning air hammer and air whip robot

The equipment is provided with the pulse air hammer and air whip device with special patent design and possessing the sudden explosive. With the
driving device (caterpillar or 4×4 wheel), the robot moves in the air duct.
The robot will loosen the dust in the air duct in a sudden and get prepared for the dust absorbing robot to absorb the dust (direct-dust-absorption method)
or for the special dust cleaner on the other end of the air duct to absorb the
dust while loosening the dust (raised-dust absorption method). Whether the
cleaning result meets the requirement can be observed from the monitoring
video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration:
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:11Kg
Voltage:24VDC; power: 90W
Operating stroke:20 meters for standard configuration, can be extended to
100 meters according to requirements
Types and material of air duct to be cleaned:rectangular or square ducts
made of metal and composite material
Cleaning method:rotating pulse air hammer and rotating air whip
Operating air pressure:0.6MPa-1.2Mpa
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color
cameras, four rear and front scatter-type high-intensity lighting (LED light
source with low temperature and long service life)

 

Leave a Reply

Your email address will not be published. Required fields are marked *