Air Conditioner Water Baffle

Home>>Ventilation Material>>Air Conditioner Water Baffle

Air Conditioner Water Baffle–Stainless Steel

Air Conditioner Water Baffle a very important component in the series of central air terminal devices. it matched with central air conditioning, used with vapour-water separator functions. It can be made from: Fiber Reinforced Plastic,stainless steel, aluminum, galvanized sheet, PVC, ABS. This product is often used in the field of central air conditioners of textile, chemical, metallurgy, machinery, medicine, electronics, environmental dust, shopping malls, hotels.

Above is Air Conditioner Water Baffle made from Stainless steel.
Features:

1, unique structure, Water Baffle,suit for a wide range of wind speed;

2, anti-rust, anti-corrosion, long service life;

3, high strength, high temperature, anti-deformation;

4, light weight, beautiful structure, small volume.

Specifications are as follows: Baffle Plate fin space: 30mm, 32mm, 34mm; Width 136mm ± 1mm, 0.5mm plate thickness.Can customize dimension.

Air Conditioner Water Baffle–Fiber Reinforced Plastic

Air Conditioner Water Baffle a very important component in the series of central air terminal devices. it matched with central air conditioning, used with vapour-water separator functions. It can be made from: Fiber Reinforced Plastics,stainless steel, aluminum, galvanized sheet, PVC, ABS. This product is often used in the field of central air conditioners of textile, chemical, metallurgy, machinery, medicine, electronics, environmental dust, shopping malls, hotels.

Above is Air Conditioner Water Baffle made from Fiber Reinforced Plastic

Features:

1,It is installed in the sprinkler pipe behind water droplets entrained in the air filter interception, can also be installed in front of the spray pipe to prevent water droplets ejected.

2,High efficiency of water baffle, low resistance, aging resistance heater. It wouldn`t deform under heat radiation characteristics in the steam and spray; adaptation section wind speed 2.5 ~ 7m / s range.It is composed by the framework and a number of string slices, each string piece has 10 corrugated plates, sheets and spacing between the sheets with plastic wrap, stainless steel screw bolt connected. Installation can be re disassembly and assembly, film and the film interval can be between 22 ~ 32mm optional.
Strings tied into several groups within the framework of stainless steel, height H> 3000mm of upper and lower layers, the middle of the drain pan, width B> 3000mm framework of the middle column.
For the cross-section wind speed is less than 2.5M / S of spray chamber, I plant a traditional multi-fold flap for first use, defined as 2 to 6 fold, the width of each fold 100mm, angle 90o ~ 120o spacing 25 ~ 40mm , the material is integrally molded fiberglass.

3, No need to reserve embed space, as long as the seat of several brick, brick seat size vertical 300mm, horizontal 250mm, spacing 600 ~ 700mm, both ends of the wall is not brickwork seat, placed on the brick when installing seat frame , the stainless steel strip bent around the hold walls, so they can not move back and forth, the frame left, right, on three sides with a connecting angle are fixed to the frame and the front wall (top) surface.

4,Specifications: fin spacing 25mm 27mm 29mm, width: 136 ± 2mm, thickness: 1mm

Home>>Ventilation Material>>Air Conditioner Water Baffle