Adjustable Thermostat for cooling and heating
Home>>Refrigerating Parts & Heating Elements>>Control Devices for Refrigerating System >>Thermostats>>Adjustable Thermostat for cooling and heating
Adjustable Thermostat for cooling
Temperature Range: 32-140F
Brand new in unopened package. Comes with directions.
- Compact design (see specs below)
- Wide adjustment range (32F-140F)
- Please note: picture shows C temperature scale. This is actually in F scale!!
- DIN rail mountable (see note below for info about DIN rails)
Thermostat “NO” (normally open):
Contact closes at temperature rise.
Info about DIN Rails:
This is designed to be mounted on a DIN rail, but that is not required. We have mounted this by simply drilling 4 holes spaced such that the prongs on the back of the thermostat press-fit into them and it worked great.
For you reference, here is a URL explaining what a DIN rail is: http://en.wikipedia.org/wiki/DIN_rail.
And here is a URL of where you can purchase it (there are MANY places to buy it, just search for DIN rail):
http://www.computercablestore.com/1_Meter_DIN_Rail_with_Hol_PID17844.aspx
Technical Information about this thermostat:
Switch temperature difference | 7K (± 4K tolerance) |
Sensor element | thermostatic bimetal |
Contact type | snap-action contact |
Contact resistance | < 10mOhm |
Service life | > 100 000 cycles |
Max. switching capacity | 250VAC, 10 (2) A |
120VAC, 15 (2) A | |
DC 30W | |
Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 60 x 33 x 43mm |
Weight | approx. 40g |
Fitting position | variable |
Operating/Storage temperature | -45 to +80°C (-49 to +176°F) |
Protection type | IP20 |
Adjustable Thermostat for heating
Temperature Range: 32-140F
Brand new in unopened package. Comes with directions.
- Compact design (see specs below)
- Wide adjustment range (32F-140F)
- Please note: picture shows C temperature scale. This is actually in F scale!!
- DIN rail mountable (see note below for info about DIN rails)
Thermostat “NC” (normally closed):
Contact opens at temperature rise.
Info about DIN Rails:
This is designed to be mounted on a DIN rail, but that is not required. We have mounted this by simply drilling 4 holes spaced such that the prongs on the back of the thermostat press-fit into them and it worked great.
For you reference, here is a URL explaining what a DIN rail is: http://en.wikipedia.org/wiki/DIN_rail.
And here is a URL of where you can purchase it (there are MANY places to buy it, just search for DIN rail):
http://www.computercablestore.com/1_Meter_DIN_Rail_with_Hol_PID17844.aspx
Technical Information about this thermostat:
Switch temperature difference | 7K (± 4K tolerance) |
Sensor element | thermostatic bimetal |
Contact type | snap-action contact |
Contact resistance | < 10mOhm |
Service life | > 100 000 cycles |
Max. switching capacity | 250VAC, 10 (2) A |
120VAC, 15 (2) A | |
DC 30W | |
Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 60 x 33 x 43mm |
Weight | approx. 40g |
Fitting position | variable |
Operating/Storage temperature | -45 to +80°C (-49 to +176°F) |
Protection type | IP20 |
Adjustable Thermostat for cooling and heating
Home>>Refrigerating Parts & Heating Elements>>Control Devices for Refrigerating System >>Thermostats>>Adjustable Thermostat for cooling and heating
Related Products:
Enquiry or Reviews
There are no reviews yet.
Be the first to review “Adjustable Thermostat for cooling and heating”