AC outdoor fan motor YDK-40-6


Supply AC outdoor fan motor YDK-40-6. AC220V-240V.50hZ,40w.


  • The motor has different shaft length as following: 55mm,68mm,78mm,98mm,106mm.
  • See the sizes details in below content.
  • Place of Origin: China
  • Sell to worldwide, Ship by air plane or by sea boat;

Send Enquiry Message

The product is liked & shared by worldwide clients:

Smartclima can supply “AC outdoor fan motor YDK-40-6” as introduced in the following article,different shaft length.We are professional to supply various of air conditioner fan motors for indoor and outdoor units ,to explore more types or models,please send enquiry message to us.

Models and Details for “AC outdoor fan motor YDK-40-6”

The motor has different shaft length as following:

AC outdoor fan motor YDK-40-6 Shaft long 55mm

AC outdoor fan motor YDK-40-6 Shaft long 68mm

AC outdoor fan motor YDK-40-6 Shaft long 78mm

Air Conditioner outdoor fan motor YDK-40-6 Shaft long 98mm

Air Conditioner fan motor code YDK-40-6 Shaft long 106mm

Fan motor YDK 40 6 shaft long 99mm and diameter 15mm


First of all, the motor looks at the steering and power (the power difference is 15W, the effect does not change much, and the buyer still needs to decide for himself). After these two conditions are met, the motor looks at whether the installation conditions are met, and then check the shaft length, shaft diameter, tooth diameter and other conditions.

How to purchase “AC outdoor fan motor YDK-40-6”

  • The motor is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us online (click here) Or send inquiry message to our email:

Enquiry or Reviews

5 Star

100 %
3 review(s)

4 Star

0 %
0 review(s)

3 Star

0 %
0 review(s)

2 Star

0 %
0 review(s)

1 Star

0 %
0 review(s)

Reviewed by 01 customer(s)

  • Robert Cottingham

    Hi Johnhua, Thankyou for your help. This motor looks perfect. I confirm that I want it. You say that you need to send me an invoice . When I receive it I will pay you by PayPal if that is what you require. Many thanks Robert Cottingham.

  • Robert Cottingham

    The photos you sent me look like my motor but I cannot see any of the shafts for the fan that are 15mm diameter. If you can confirm that the shaft is 98 mm long and 15mm in diameter then I would like to order one please. Regards Robert Cottingham.

  • Robert Cottingham

    Hi, I am looking for a YDK 40 6 fan motor for a Hydro Pro 13 heat pump. The motor is 120 mm diameter. The shaft which holds the fan is 98mm total length to the end of the thread. This shaft is 15mm diameter. As you look at the front of the fan it turns clockwise. The motor is .55 amp and 850 rpm. From the top of the threads on the shaft to the circlip groove where the fan tightens against is 60mm long..The motor is held in place by four screws. Can you help me please. Regards Robert Cottingham I live in England UK.


Write enquiry message or review

Rate Your Satisfaction*