logo

Year: 2017

Water Heater Cleaning and Sterilizing Machine

Water Heater Cleaning and Sterilizing Machine 1

Water Heater Cleaning and Sterilizing Machine 2

Item:Water Heater Cleaning and Sterilizing Machine
(Also for cleaning and sterilize to Water Purifier)

Brief Description: Water Heater Cleaning and Sterilizing Machine.With double function: recycle cleaning ,ozone sterilizing. All-in-one kit.Just put chemical powder or liquid into the machine tank,and then start cleaning&sterilizing work automatically. It can clean and sterilize to water heater and water purifier.

Ozone can react with bacteria in water,kills the bacteria very quickly(The bactericidal speed is 600-3000 times faster than that of chlorine) and then it will turn into oxygen,and so,ozone disinfection and sterilization will not leave any harmful substances. Under normal circumstances, about 30-60 minutes,ozone will decompose into oxygen by itself. After disinfection, there will be some ozone odor inside of the water purifier,but it doesn`t matter, you can open faucet and let clear water flow some minutes, then the odor will disappear. Therefore, it will not cause secondary pollution to the water purifier,and of course,no any harmful to human.Operation is very simple,just need to connect the pipes onto inlet and outlet of water purificer,then switch on the machine,that`s all.If you put food grade citric acid into the water, it also can remove scale in the water purifier or in water heater tank.

220V or 110V(If you request),95W.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Water Heater Cleaning and Sterilizing Machine
Features & Details for “Water Heater Cleaning and Sterilizing Machine”

Water Heater Cleaning and Sterilizing Machine 3 Water Heater Cleaning and Sterilizing Machine 4Water Heater Cleaning and Sterilizing Machine 5

How to cleaning water heater using this “Water Heater Cleaning and Sterilizing Machine”?

It`s easy and you can clean your water heater easily with our machine,not only for your own DIY cleaning,but also for commerical purpose cleaning,please check the following steps.After one-time operation,you will be skilled at cleaning.

Step 1, Put water into the tank and dissolve the chemical powder or liquid into the water;
Water Heater Cleaning and Sterilizing Machine 6

Step 2,  Connect the machine as following:

Water Heater Cleaning and Sterilizing Machine 7

Step 3, Close off the valve of hot water pipe and cold water pipe; Take off hot water pipe and cold water pipe,and connect short pipe onto the port.
Water Heater Cleaning and Sterilizing Machine 8

Step 4,  Connect machine and water heater tank as following.And then switch on the machine to start recycle cleaning.
Water Heater Cleaning and Sterilizing Machine 9

Step 5, After about 30minutes,finish the cleaning work. Drain out the grey water,and recovery pipes.Finish.

Buying Option 1,  Water Heater Cleaning and Sterilizing Machine kit.

Water Heater Cleaning and Sterilizing Machine 10Water Heater Cleaning and Sterilizing Machine 4

Buying Option 2,  Water Heater Cleaning and Sterilizing Machine kit + Inside inspector

Water Heater Cleaning and Sterilizing Machine 12 Water Heater Cleaning and Sterilizing Machine 13Water Heater Cleaning and Sterilizing Machine 14

Buying Guide to “Water Heater Cleaning and Sterilizing Machine”
  • The device listed above is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;

HVAC Parts >> Water Project Materials  >>Water Heater Cleaning and Sterilizing Machine

HVACR Cleaning & Service materials

The page is under constructing,coming soon…

Rubber Damper Mat

Rubber Damper Mat 15

HVAC Parts >>Air Conditioner Spare Parts>>Air Conditioner Installation Materials >>Vibration Damper >> Rubber Damper Mat

Rubber Damper Mat Type A

Rubber Damper Mat

Rubber Damper Mat

 

Rubber Damper Mat Type B,170X170X17mm

mat1 mat2 mat3 mat4

Designed for Indoor and Outdoor applications,and also for such as small HVAC units, air compressors, generators or any where vibration control is needed. Reduces noise and lessens machine downtime due to vibration related repairs. Temperature range – 40F to 200F degrees. Water, UV, chemical and solvent resistant. Independent Lab testing data available.
Reduce vibration transfer from equipment to surface and diminishes noise
Eliminates movement due to vibration
Safe for marine and nautical applications
UV resistant
For use in temperatures from -40 to 200 Fahrenheit
Use indoors or out for any application, such as smaller HVACR units or exercise equipment 200 – 500 lbs.

Rubber Anti Vibration Pad for Air Conditioner indoor unit

Rubber Anti Vibration Pad for Air Conditioner indoor unit 16

HVAC Parts >>Air Conditioner Spare Parts>>Air Conditioner Installation Materials >>Vibration Damper >> Rubber Anti Vibration Pad for Air Conditioner indoor unit

Rubber Anti Vibration Pad for Air Conditioner indoor unit

Size: 100x100x5mm,100x100x10mm,100x100x15mm,for indoor unit at 4 corners hanging points.

Designed for Indoor and also for Outdoor applications,and also for such as small HVAC units, air compressors, generators or any where vibration control is needed. Reduces noise and lessens machine downtime due to vibration related repairs. Temperature range – 40F to 200F degrees. Water, UV, chemical and solvent resistant. Independent Lab testing data available.
Reduce vibration transfer from equipment to surface and diminishes noise
Eliminates movement due to vibration
Safe for marine and nautical applications
UV resistant
For use in temperatures from -40 to 200 Fahrenheit
Use indoors or out for any application, such as smaller HVACR units or exercise equipment 200 – 500 lbs.

Rubber Grommets For Refrigeration pipe,good shock absorption

Rubber Grommets For Refrigeration pipe,good shock absorption 17

Rubber Grommets For Refrigeration pipe

Item: Rubber Grommets For Refrigeration pipe

Short Description:Rubber vibration dampening grommets,Rubber buffer,rubber block,Adding weight for refrigeration copper pipe system.These products are always used in refrigeration system,to mount copper pipe( suction & discharge line from compressor) and thus avoid or reduce viberation from the system.Made from rubber,anti-aged performance.

Features:Abrasion resistant;High in strength;Perfect finish.

Models and Size/Dimension:For copper tube 1/4″,3/8″,1/2″,5/8″…(See below tables)

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Rubber Grommets For Refrigeration pipe
Models & Details for “Rubber Grommets For Refrigeration pipe”

Compressor Vibration Isolators Replacement Rubber Grommet,Rubber antivibration damper kit,they are specifically designed to absorb and remove the resonance sympathetic vibration from the compressors in A/C and Refrigeration system,and thus become the top-quality vibration isolation and dampening for copper tube when refrigeration compressor working.

Advantage :

√ Made from advanced rubber,can stand long years and anti-aged;
√ High in strength,and no easy to break;
√ Easy to use,just around the copper tube;
√ Customizable size if you required.

Application :
This product is always used in refrigeration system,to mount copper pipe and thus avoid or reduce viberation from the system.Made from rubber,anti-aged performance.

Dimension and Parameter:
For mount copper tube 1/4″,3/8″,1/2″,5/8″… (See below tables)

Rubber add-weight Grommets For air conditioner and Refrigeration pipe

Refrigeration pipe rubber mount

rubber buffer for copper tube

rubber eccentric add-weights

All models:

ModelsInner dia.
(mm)
Outer dia.
(mm)
Height
(mm)
Fit for tube
(mm)
3001A5.530246.35  (1/4″)
3001B8.730249.52  (3/8″)
3001C11.5302412.7  (1/2″)
3001D15302415.88 (5/8″)
3001G7.130247.94
3001R5.520236
3001S720257.5
2009A14 554015.88
2009B11 554012.7
2009C8.8555409.52
2009F27.5554028
2009E19.05554019.05
258g21554022
160g21554022
PZK-027.830307.94
PZK-039.2535359.52
PZK-0412.7353512.7
PZK-097.83030Concentric 7.94
PZK-129.523030Concentric 9.52
PZK-1415.88404015.88
NP-102820408
NP-07720407
001411.5353512
00157.530217.94
0016930289.52
0066630216.5
Buying guide to “Rubber Grommets For Refrigeration pipe/rubber vibration dampening grommets ”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with container delivery;
  • Please contact us to email: [email protected]
General knowledge for “Rubber Grommets For Refrigeration pipe ”

The air conditioning or refrigeration system copper pipeline inevitably will generate vibration when the compressor is running, especially the exhaust pipe and the suction pipe directly connected to the compressor. Conventional practice is to change the resonant frequency by adding rubber eccentric weights or Rubber Grommets(names rubber adding weight) onto the copper tube. Another method is to absorb the vibration by wrapping the copper tube with the rubber piece, and also has the function of  add-weight.

The main material of the clay is butyl rubber, which is made with other environmentally-friendly additives. It is a self-adhesive self-adhesive damping rubber sheet made by advanced technology. It adopts anti-adhesive paper layer and is covered with transparent film. It has strong adhesion to various materials, and has excellent weather resistance, aging resistance and water resistance. It seals and absorbs the surface of the adherend. , protection and other functions.
Recently, some of the rubber purchased on the market has been found to be tied to the exhaust pipe. The time is not long, the material melts and falls off from the copper tube, thus losing the shock absorption effect. After analysis and inquiry, some air conditioner manufacturers have technical requirements for the damping block. It is found that the cement needs to meet the test requirements of weather resistance, heat resistance, high temperature fluidity, low temperature flexibility, copper tube corrosion and toxicity. Be sure to test or purchase qualified products from air-conditioner manufacturers. You can’t buy goods or small workshops. The small details will affect the quality of the products.
The brief requirements are as follows:
Heat resistance and cold resistance  
1.1 High temperature resistant damping damping block, required to test at -20 ° C ± 5 ° C and 115 ° C ± 5 ° C temperature for 72 hours, no flow, no hardening.  
1.2 Low temperature resistant damping damping block, required to test at -40 ° C ± 5 ° C and 50 ° C ± 5 ° C temperature for 72 hours, no flow, no folding without cracking. 
2. Metal corrosive   damping damping block has no corrosive effect on metallic copper, iron and surface coating (test temperature 100 ° C, time 7 days).
3. Toxicity and odor   damping The damping block is required to be non-toxic and odor-free (distilled water is colorless, odorless, non-toxic after being placed in 40 distilled water for 24 hours). 
4. The service life   damping damping block can be firmly pasted, and there is no phenomenon of runny, shedding, hardening, brittleness, cracking and the like during the use period.
Maybe,you also will like the following item:
Rubber-Antivibration-Grommet-Pads-For-Double-Refrigeration-pipe
Double-Holes Rubber Grommet For Refrigeration Pipe System
Rubber Damping Pad For Refrigeration Copper Tube
Rubber Damping Pad For Refrigeration Copper Tube
Rubber Grommets For Refrigeration Compressor,Air Conditioner Compressor Rubber Damper Feet
Rubber Grommets For Refrigeration Compressor,Air Conditioner Compressor Rubber Damper Feet
Compressor Soundwraps Blanket
Compressor Soundwraps Blanket

Battery Charger Control Module XH-M604

Battery Charger Control Module XH-M604 18

[content id=”32159″][content id=”32342″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M604:

Battery Charger Control Module XH-M604 19

Item: Battery Charger Control Module XH-M604

1.For DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board
Manufacturer: Smartclima
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Battery Charger Control Module XH-M604
Models & Details for “Battery Charger Control Module XH-M604 ”

This product is suitable for 6-60V battery charging control, can be set free to start charging voltage and stop charging voltage! In the IN input charger 660V voltage, in the OUT terminal battery, for example, set 12V start 15V stop when the voltage is below 12V when the relay is closed to the charger charging voltage to the battery, when the charge voltage is greater than 15V Relay off to stop charging, can be used in household chargers, solar, wind turbines

Product Introduction:
1.Name:numerical control battery charging control module
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Using Method:
1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value
3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings

Battery Charger Control Module XH-M604 20 Battery Charger Control Module XH-M604 21 Battery Charger Control Module XH-M604 22 Battery Charger Control Module XH-M604 23 Battery Charger Control Module XH-M604 24 Battery Charger Control Module XH-M604 25 Battery Charger Control Module XH-M604 26

Buying Guide to “Battery Charger Control Module XH-M604 ”
  • The module is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M604

Battery Charger Control Module XH-M602

Battery Charger Control Module XH-M602 27

[content id=”32159″][content id=”32342″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M602:

Battery Charger Control Module XH-M602 28

Item: Battery Charger Control Module XH-M602

1.For DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board
Manufacturer: Smartclima
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Battery Charger Control Module XH-M602 
Models & Details for “Battery Charger Control Module XH-M602 ”

This product is suitable for 6-60V battery charging control, can be set free to start charging voltage and stop charging voltage! In the IN input charger 660V voltage, in the OUT terminal battery, for example, set 12V start 15V stop when the voltage is below 12V when the relay is closed to the charger charging voltage to the battery, when the charge voltage is greater than 15V Relay off to stop charging, can be used in household chargers, solar, wind turbines

Product Introduction:
1.Name:numerical control battery charging control module
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output
7.Voltage Tolerance:+/-0.1V
8.Application Fields:6-60V storage battery
9.Size:81*54*18mm

Using Method:
1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value
3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings

Battery Charger Control Module XH-M602 29 Battery Charger Control Module XH-M602 30 Battery Charger Control Module XH-M602 31 Battery Charger Control Module XH-M602 32 Battery Charger Control Module XH-M602 33 Battery Charger Control Module XH-M602 34 Battery Charger Control Module XH-M602 35 Battery Charger Control Module XH-M602 36

Buying Guide to “Battery Charger Control Module XH-M602 ”
  • The module is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>Battery Charger Control Module XH-M602

DC Balanced Power Estimating and Monitoring Module XH-M242

DC Balanced Power Estimating and Monitoring Module XH-M242 37

[content id=”32159″][content id=”32335″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Consumption Meter,Balanced Power Displaying Module>>DC Balanced Power Estimating and Monitoring Module XH-M242:

DC Balanced Power Estimating and Monitoring Module XH-M242 38

Item: DC Balanced Power Estimating and Monitoring Module XH-M242

Model: XH-M242

For DC7-80V;
Power supply: no need independent power-supply;
Measuring precision: 0.1V
Size: 64x47x23mm;

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “DC Balanced Power Estimating and Monitoring Module XH-M242
Details on: “DC Balanced Power Estimating and Monitoring Module XH-M242”

DC Balanced Power Estimating and Monitoring Module XH-M242 39 DC Balanced Power Estimating and Monitoring Module XH-M242 40 DC Balanced Power Estimating and Monitoring Module XH-M242 41 DC Balanced Power Estimating and Monitoring Module XH-M242 42 DC Balanced Power Estimating and Monitoring Module XH-M242 43 DC Balanced Power Estimating and Monitoring Module XH-M242 44 DC Balanced Power Estimating and Monitoring Module XH-M242 45

Buying Guide to “DC Balanced Power Estimating and Monitoring Module XH-M242”
  • The product is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Consumption Meter,Balanced Power Displaying Module>>DC Balanced Power Estimating and Monitoring Module XH-M242

DC Power Consumption and Balanced Power Displaying Module XH-M241

DC Power Consumption and Balanced Power Displaying Module XH-M241 46

[content id=”32159″][content id=”32335″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Consumption Meter,Balanced Power Displaying Module>>DC Power Consumption and Balanced Power Displaying Module XH-M241:

DC Power Consumption and Balanced Power Displaying Module XH-M241 47

Item: DC Power Consumption and Balanced Power Displaying Module XH-M241

Model: XH-M241

For DC7-80V;
Power supply: no need independent power-supply;
Measuring precision: 0.1V
Size: 64x48mm;

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “DC Power Consumption and Balanced Power Displaying Module XH-M241
Details on: “DC Power Consumption and Balanced Power Displaying Module XH-M241”

DC Power Consumption and Balanced Power Displaying Module XH-M241 48 DC Power Consumption and Balanced Power Displaying Module XH-M241 49 DC Power Consumption and Balanced Power Displaying Module XH-M241 50

Buying Guide to “DC Power Consumption and Balanced Power Displaying Module XH-M241”
  • The product is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Consumption Meter,Balanced Power Displaying Module>>DC Power Consumption and Balanced Power Displaying Module XH-M241

Digital Ampere Current Displaying and Detecting Meter 0-15A

Digital Ampere Current Displaying and Detecting Meter 0-15A 51

[content id=”32159″][content id=”32333″]You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Electric Current Displaying Module,Ampere Meter>>DDigital Ampere Displaying and Detecting Meter 0-15A:

Digital Ampere Current Displaying and Detecting Meter 0-15A 52

Item: Digital Ampere Current Displaying and Detecting Meter 0-15A

Model: SCAM-02

To measure DC0-15A;
Power supply: DC6-30V
Working Temperature: 15-65℃;
Measuring precision: 1%
Resolution ratio: 0.01
Refresh speed: 500ms/time;
Outer plastic shell color: Black and White
Showing number color: Red,Blue;
Showing Mode: Three digital 0.56LED;

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Digital Ampere Current Displaying and Detecting Meter 0-15A
Details on: “Digital Ampere Current Displaying and Detecting Meter 0-15A”

Digital Ampere Current Displaying and Detecting Meter 0-15A 53 Digital Ampere Current Displaying and Detecting Meter 0-15A 54 Digital Ampere Current Displaying and Detecting Meter 0-15A 55

Buying Guide to “Digital Ampere Current Displaying and Detecting Meter 0-15A”
  • The product is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Voltage Displaying module>>Digital Ampere Current Displaying and Detecting Meter 0-15A