logo

TP4056 1A lithium battery charging board charging module

smart controlling-electronicsYou locate here ⇓

√ Temp. & Humidity  Controlling  Water Flowing & Pressure Controlling Audio Amplifier ControllingVoice/Color/ Fire ModulesVibration ModuleHall Sensor Module
Wireless ModuleRelay Extending ModuleInfrared/Lighting Electric ModuleTiming ModuleMotor ModuleLCD Module
GY ModuleDevelopment BoardOther Function Module√ Voltage /Current Displaying,Converting &Controlling ⇓Tools&MetersElectronics Accessories
√Voltmeter/Voltage Displaying√Ammeter/Ampere Displaying√Power  Consumption Meter√Power Adapter/ Volt Converter √Current/Volt Regulating and Stabilizing Module√Power Charging Module ⇓
You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>TP4056 1A lithium battery charging board charging module :

TP4056 1A lithium battery charging board charging module lithium battery charger Mini USB interface

Item: TP4056 1A lithium battery charging board charging module lithium battery charger Mini USB interface

Manufacturer: Smartclima
Charging method: linear charge 1 hundred
Charging current: 1A adjustable
Charging accuracy: 1.5 hundred
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indication: red light charging, green ;ight full charge/red light charging, blue light full charge;
Input interface: mini USB
Operating temperature: -10 ℃ to +85 ℃
Can it be reversed? NO.
Size: 25 * 19 * 10mm

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “TP4056 1A lithium battery charging board charging module
Models & Details for “TP4056 1A lithium battery charging board charging module ”

wiring of TP4056 1A lithium battery charging board charging module lithium battery charger Mini USB interface.jpg

Module application range
★ This module is used for single-cell lithium or multi-section parallel lithium charging, charging port can take power from the USB.

Instructions for use / precautions
★ Test current ammeter can only be connected in series at the 5V input of the charging board.
★ charge current is good battery capacity of 0.37C, is the capacity of 0.37 times, such as 1000mAH battery charging current 400 is enough. Too fast to charge the effect of fast, red finished the battery voltage out on the more!
★ charge connection wire can not be too long. So that the connection resistance is large. Too thin words out of the battery voltage out of the more.
★ Good connection with battery connection. Or rushed out of the battery voltage out of the more.
★ If the 5V input voltage is high, such as 5.2 or even 5.5, will cause the charging current less than 1000mA, which is normal. High voltage chip heat will automatically reduce the charge current, not to burn the chip. Chip in the work of about 60 degrees heat is normal. After all, the charging current is large.
★ input reverse on the chip has no effect, but the output (battery side) will burn the chip back.

Current regulation:

RPROG (k)IBAT  (mA)
3050
2070
10130
5250
4300
3400
2580
1.66690
1.5780
1.33900
1.21000
Buying Guide to “TP4056 1A lithium battery charging board charging module ”

You are here: Smartclima Home>>Electronic Function And Controlling Module Unit>>Voltage and Current Controlling Modules>>Power Charging Module>>TP4056 1A lithium battery charging board charging module

Send Inquiry To Us

Your email address will not be published. Required fields are marked *