logo

KSD-01F thermostat,KSD-01F temperature controller

KSD-01F-thermostat

Item: KSD-01F thermostat,KSD-01F temperature controller

Type:Normally disconnected , Normally connected.
Contact load: 220VAC 1A or 24VDC 3A
Dimensions (total length × width × thickness): 29.7 × 10.2 × 4.7mm
Temperature range: 0 ℃ -130 ℃ (every 5 ℃ a specification)
Contact type: normally closed (-D) or normally open (-H);
Package form: TO-220 metal backplane
Contact resistance: ≤ 50mΩ
Insulation value: ≥ 100MΩ (500VDC)
Insulation strength: 1500V / DC, 60Hz
Standard tolerance: ± 5 ℃

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “KSD-01F thermostat,KSD-01F temperature controller
Models & Details for “KSD-01F thermostat,KSD-01F temperature controller”
Normally closed: connected at below the temperature and disconnect after reach the marked temperature, for heating / high temperature protection.Can be used for various components to do the temperature insurance to prevent overheating burned, can also be used for heating equipment to reach the temperature on the disconnect, you can constant temperature, up to 10A.
normally closed 30℃
normally closed 35℃
normally closed 50℃
normally closed 60℃
normally closed 70℃
normally closed 80℃
normally closed 90℃
normally closed 100℃
normally closed 105℃
Normally disconnected: Disconnected at below the temperature and connect after reach the marked temperature,often for cooling purpose.Used in such as the computer’s fan to reach the temperature to open the fan cooling, with screw holes, the installation is very convenient.Current up to 10A wide range of industrial applications.Built-in mechanical switch, directly connected in series when the circuit is used, no additional power supply
Normally disconnected 45℃
Normally disconnected50℃
Normally disconnected 55℃
Normally disconnected 60℃
Normally disconnected 65℃
Normally disconnected 70℃
Normally disconnected 80℃

Technical Parameters:
Contact load: 220VAC 1A or 24VDC 3A
Dimensions (total length × width × thickness): 29.7 × 10.2 × 4.7mm
Temperature range: 0 ℃ -130 ℃ (every 5 ℃ a specification)
Contact type: normally closed (-D) or normally open (-H);
Package form: TO-220 metal backplane
Contact resistance: ≤ 50mΩ
Insulation value: ≥ 100MΩ (500VDC)
Insulation strength: 1500V / DC, 60Hz
Standard tolerance: ± 5 ℃
Working environment temperature: -55 ℃ – 160 ℃ (short-term maximum temperature: 260 ℃ 10 seconds)
Weight ≤2g
Working principle:
KSD-01F temperature control switch using TO-220 package, sudden jump, single pole / single throw contact point 100% conduction structure, when the outside temperature is too high

, Pass to the corrected bimetal will be quickly action, so cut off or connected to the circuit (normally closed or normally open two), when the temperature dropped to

Reset the temperature, the bimetal and quickly reset, repeat the work to ensure product safety protection of the temperature.
Product Usage:
Suitable for space-saving PC boards. Typical applications include alarm or shutdown systems when the circuit is overheated; computer and computer peripherals, electrical equipment;

Electronic products; power supply; aircraft, automotive, medical equipment and test equipment; household appliances and circuit boards for temperature control and thermal overload protection

Working life                           working voltage                           working current
10,000 times                                250V AC                                        2A
10,000 times                                120V AC                                        2A
30,000 times                                48V DC                                           1A
100,000 times                               5V DC                                            0.02A

Contact resistance              Insulation resistance                         Dielectric pressure
≤ 100mΩ                                            ≥100MΩ                                          1500V AC

KSD-01F thermostat,KSD-01F temperature controller 1 KSD-01F thermostat,KSD-01F temperature controller 2

Buying Guide to “KSD-01F thermostat,KSD-01F temperature controller”
  • The Digital Thermostat Module Model XH-W1209 is available for retail and wholesale;
  • Accept customized bulk production,putting your logo;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

Send Inquiry To Us

Your email address will not be published. Required fields are marked *