logo

Finned U Tube Air Cooled Heat Exchanger

Home>>Refrigerating Parts & Heating Elements>>Heat Exchangers>>Finned U Tube Air Cooled Heat Exchanger

Finned U Tube Air Cooled Heat Exchanger with fan installation frame

Item:Finned U Tube Air Cooled Heat Exchanger

Brief Description: Finned U Tube Air Cooled Heat Exchanger with or without fan motor.

Features: aluminium fins and copper tube,high-quality fan motor with long service life.

Models: See below instruction.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Finned U Tube Air Cooled Heat Exchanger
Models:  Finned U Tube Air Cooled Heat Exchanger without fan installation frame

Finned U Tube Air Cooled Heat Exchanger Air-Cooled-Heat-Exchanger11 Air-Cooled-Heat-Exchanger12

non-standard condenser

1.material :copper , aluminum ,galvanized plate

2.aluminum foil: hydrophilic or bare

3.fin type: louver fin or corrugated fin or flat fin

4.copper pipe: diameter 7mm, 8mmor 9.52mm ,smooth or grooved pipe

5.side plate: galvanized steel plate

6.size: from1/8HP to 20HP

7.pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05mm

8.did gas examination under 3.0Mpa air pressure to ensure the tightness.

9.widely used in refrigeration industry, cold room and other system.

Note: we can supply products as per customized samples or drawing.

Models:  Finned U Tube Air Cooled Heat Exchanger with fan installation frame

Finned U Tube Air Cooled Heat Exchanger with fan installation frame Finned Tube Air Cooled Heat Exchanger with fan installation frame

It is made up of condensing fin, axial blower and framework. Product has high quality with competitive price .

1. Frame material choice : copper , aluminum ,galvanized plate

2. aluminum foil: hydrophilic or bare

3. fin type: louver fin or flat fin  or corrugated fin

4. copper pipe: diameter 7mm or 8mm or 9.52mm ,grooved or smooth tube

5. spec: different size, pitch of fins can be adjusted between 1.8-5.8mm.

6. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM

7. suitable for R134A, R22, R404A, R407C refrigerant and so on

8. voltage: 120VDC or 220V/1/50HZ and 380V/3/50HZ or other types.

9. different alternative condensing fans available: shaded pole or outer rotor fan motor.

10.did gas examination under 3.0Mpa air pressure to ensure the tightness.

12.widely used in refrigeration industry, cold room and other cooling system.

13. we can supply products as per customized samples or drawing.

14.producing procedure: tube bending, punching fin, expanding, digressing, drying

Welding, leakage test, bending, inspection, packing

Note: for further information please contact us

Models:  Finned U Tube Air Cooled Heat Exchanger system with fan unit

Finned Tube Air Cooled Heat Exchanger system with fan unitFinned Tube Air Cooled Heat Exchanger system with fan unit

It is made up of condensing fin, axial blower and framework. Product has high quality with competitive price

1.material :copper , aluminum ,stainless steel

2.aluminum foil: hydrophilic or bare

3.fin type: louver fin or corrugated fin

4.copper pipe: diameter 7mm or 9.52mm ,inner screw thread or grooved pipe

5.spec: different size, pitch of fins can be adjusted between 2.0–3.0mm.

6.voltage :220V/1/50HZ and 380V/3/50HZ .
7.different alternative condensing fans available.
8.did gas examination under 3.0Mpa air pressure to ensure the tightness.

9.condenser type:

 side-exhausted with single fan, double fan, triple fan and fourfold fan, heat exchange surface is from 2 square meter to 180 square meter top-exhausted with double fan and triple fan, heat exchange surface is from 80 square meter to 600square meter.
10.widely used in refrigeration industry, cold room and other system.

Note: we can supply products as per customized samples or drawing.

Home>>Refrigerating Parts & Heating Elements>>Heat Exchangers>>Finned U Tube Air Cooled Heat Exchanger


4 Comments  to  Finned U Tube Air Cooled Heat Exchanger

  1. azzaam qasim says:

    A Heat Exchanger is a gadget constructed for warmth exchange starting with one liquid then onto the next, whether the liquids are isolated by a strong divider so that they never blend, or the liquids are in direct contact. Fans are utilized to create the air that exchanges this warmth, henceforth fans are a crucial piece of warmth exchangers. It is vital to choose a suitable fan as indicated by the use of the warmth exchanger and ICS has built up a scope of fans especially for warmth exchanger application.

  2. kyle saucier says:

    Hello,

    I’m looking for a tube/fin heat exchanger for potable water. I’d like the product to be no larger than 4.5”x4.5”, thickness is not a huge concern.
    Thank you

  3. Michael Ong says:

    Please advise if the Finned U Tube Air Cooled Heat Exchanger is suitable for my application, and if so, what is the cost. The application is this: Pure oxygen at 250 degrees C needs to be cooled to 30 degrees C. Room temperature is 20 degrees C. Flowrate is 5 lit/min. Pressure is approx. 1 atmosphere at outlet.

  4. Denali says:

    1)Air is to be heated by condensing steam. The two heat exchangers are available
    The shell and tube heat exchanger and the finned tube heat exchanger. The tube side heat exchange area is equal in both cases. The recommended arrangement is——-
    a) Finned tube heat excahnger with air inside and steam outside
    b) Finned tube heat exchanger with air outside and steam inside
    c) shell and tube heat exchanger with air inside tubes and steam shell side
    d) shell and tube heat exchanger with air on shell side and steam inside tubes
    Ans- b
    Here my question is what is the finned tube heat exchanger and what is the advantage of using finned tube heat exchanger over shell and tube heat exchanger???

    2) Steam is to be condensed in a shell and tube heat exchanger, 5m long with a shell diameter of 1m. Cooling water is to be used for removing the heat. Heat transfer coefficient for the cooling water, whether on shell tube or tube side, is same.. The best arrangement is–
    a) Vertical heat exchanger with steam on tube side
    b) Vertical heat exchanger with steam on shell side
    c) Horizontal heat exchanger with steam on tube side
    d) Horizontal heat exchanger with steam on shell side
    Ans-b
    Why is it so??
    Please explain…

    Thank You

Leave a Reply

Your email address will not be published. Required fields are marked *

Optionally add an image (JPEG only)