logo

Digital Thermostat Module Model XH-W1210

[content id=”32106″][content id=”32211″] You are here: Smartclima Home>> Electronic Function And Controlling Module Unit>>Temperature And Humidity Controlling Module Unit>>Thermostat mainboard>>

Digital Thermostat Module Model XH-W1210Item: Digital Thermostat Module Model XH-W1210

Thermostat range: 0 ~ 99 ℃
Resolution: 1 ℃
Temperature measurement accuracy: 1 ℃
Control accuracy: 0.1 ℃
Backlash accuracy: 0.1 ℃
Refresh rate: 0.5 S
Motherboard Power Supply: DC/AC 12V
Output: 1 channel relay output, capacity=10A;
Measurement input: NTC (10K 0.5%) Waterproof sensor
Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%
Size: 50 * 65mm (M3 mounting holes diagonal 40mm.)
Power consumption: Quiescent Current: ≤35MA

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Digital Thermostat Module Model XH-W1210
Models & Details for “Digital Thermostat Module Model XH-W1210”

Technical parameters
Thermostat range: 0 ~ 99 ℃
Resolution: 1 ℃
Temperature measurement accuracy: 1 ℃
Control accuracy: 0.1 ℃
Backlash accuracy: 0.1 ℃
Refresh rate: 0.5 S
Motherboard Power Supply: DC/AC 12V
Output: 1 channel relay output, capacity=10A;
Measurement input: NTC (10K 0.5%) Waterproof sensor
Environmental requirements: -10 ~ 60 ℃ Humidity 20% -85%
Size: 50 * 65mm (M3 mounting holes diagonal 40mm.)
Power consumption: Quiescent Current: ≤35MA

XH-W1210-1 XH-W1210-2 XH-W1210-3 XH-W1210-4 XH-W1210-5

How to operate:
Connect the power supply and equipment, the controller can be powered to measure the temperature is displayed, press the SET button, the display temperature flashes, press + – to set the desired temperature (hold down the + – quick lift) set When finished, press sET to confirm the return, then the controller automatically executed by setting the relay off! The thermostat is 10A relay outputs to meet a variety of high-power loads, connect the control circuit can be powered for the thermostat, then the display is the ambient temperature,

The lights, LED and buzzer status description:
LED: flashes to indicate cooling or heating startup delay, Always indicate the relay is closed
Digital Tube: Shows LL sensor opens, follow the instructions to connect the sensor; display HH is beyond the measurement range thermostat will forcibly disconnect relay; high-temperature alarm display —

 

CodeIndicatingSet rangeInital Setting
P0Mode set(Heating or Cooling)H/CC
P1Set return difference0.1-152
P2Time Delay Set0-10minutes0
P3High temp.alarmon/off→0-99℃off

*Press key of “+” “-” can recovery to be factory setting

Buying Guide to “Digital Thermostat Module Model XH-W1210”
  • Notice XH-W1210 can control cooling mode only.
  • The Digital Thermostat Module Model XH-W1210 is available for retail and wholesale;
  • Accept customized bulk production,putting your logo;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] or [email protected] ,we can supply a favourite item you need.

2 Commentsto Digital Thermostat Module Model XH-W1210

  1. Emmanuel says:

    Dear Supplier,
    I am interested in buying at least 100 pc of Digital Thermostat Module Model XH-W1210. Can the size of the PCB be modified?
    Can you quote me best price for 100 pc with shipment to Germany?
    I need this module to shut off heater when set temperature is reached.

    with best regards

  2. Mike Maier says:

    Hello,

    please can you send me a function describtion for the XH-W1210.

    Thank you very much

    Yours

    Mike Maier

Send Inquiry To Us

Your email address will not be published. Required fields are marked *