logo

water flow switch

now browsing by category

 

Water level controlling module

HVAC Parts >> Temperature Control Devices/Thermostat >>Water level controlling module

Water level controlling module

Item: Water level controlling module

Description&Function: Water level controlling module,installed with “Water level sensor switch” to control water pump to start or stop when water level changes.
Specifications Model: XH-M203
Input voltage: AC/DC12V
Output: max.10A
Output type:Relay output;
Unit Size:60X40X18mm;

Place of origin: China factory sell directly , Sell to worldwide.

Order or Inquiry on “Water level controlling module
Models & Details for “Water level controlling module”

liquid level controller water level smart controller back of controller controller wiring water liquid level position controlling unit application for controller water level controller usage

 

Comes with “Water level sensor switch”
Water level controlling module 1

Buying Guide to “Water level controlling module”
  • The Water level controlling module is available for retail and wholesale;
  • Accept customized bulk production,putting your logo;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] ,we can supply a favourite item you need.

Water flow switch JR-B678

HVAC Parts >>Water Project Materials>>Water flow switch  JR-B678

Water flow switch JR-B678

Item: Water flow switch  JR-B678

Short Description: Also named Pressure Control Flow Switch,Pressure Switch,Water Flow Sensor.It always works with water pump to control water pump state(work or stop) depends on its sensor for water flow or not.After open water equipment, the water will flow in water pipe, the flowing water impulse door sensors inside along the shaft to rotate the flow direction of water flow, magnetic device inside rotate with the shaft together, to a certain position, trigger the sensing element, the switch then is turned on, (if you connect it with the water pump),then the water pump starts to work. When the water is turned off, the pump then stop working.The switchs are widely used in the field of solar thermo system,water project,and industry field.

Materials: Plastic shell
Models: JR-B678, male connector 3/4″ to 3/4″;

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Water flow switch JR-B678
Models & Details for “Water flow switch JR-B678”
最大开关电流: 0.5 A( 安培 )启动水压: ≤ 0.1 Mpa (兆帕)
最大负载电流: 1.0 A( 安培 )最少承受水压: 1.2 Mpa (兆帕)
最大接触电阻: 100 m Ω最大承受水压力: 1.6 Mpa (兆帕)
最大负载功率: 10 W( 瓦特 )工作环境温度:-10—100℃(摄氏度)
最大开关电压:100 VDC(直流电压)适用环境温度: -4 0 — 150 ℃(摄氏度)
最少崩溃电压: 220 VDC( 直流电压 )使用寿命: 10e8 次(开关循环)( 5VDC 10mA)
启动水流量: ≤ 2 L/min (升分钟)响应时间: 0.2 S (秒)
工作水流范围: 2- 30 L ∕ min (升∕分钟)释放时间: 0.2 S (秒)

Application :
The switchs are widely used in the field of solar thermo system,water project,and industry field.With this water flow switch,you can let  Solar Hot Water Circulation Pump work only when the water in pipe flows. Once water flow stops,the pump will stop running,too.

solar Water flow switch Water switch JR-B678 Water flow switch JR-B678 Water flow switch JR series

Buying guide to “Water flow switch JR-B678”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

HVAC Parts >>Water Project Materials>>Water flow switch JR-B678