logo

Vibration Absorbers

now browsing by category

 

Refrigeration Anti-Vibration Corrugated Tube

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Anti-Vibration Corrugated Tube

Refrigeration Anti-Vibration Corrugated Tube

Refrigeration anti-Vibration Corrugated Tube

INTRODUCTION:

Tube is made from #304 stainless steel ,and with brass nuts.

1,Refrigeration Vibration Corrugated Tube can greatly reduce vibration and noise frpm refrigerant pipeline system, It can fundamentally solve all kinds of pipe interface displacement, axial stretching and misalignment problems.

2 Different materials can be made according to acid, alkali resistant, corrosion, oil, heat and other kinds of species ,it adapts to a variety of media and the environment.

3 Sealing, light weight, easy installation and maintenance, long life, but pls avoid contact with sharp metal instruments, so as not to pierce the sphere.

4, If overhead ,it can be equipped with elastic supports, installation of bolts to use diagonal method.

5 If the line pressure is too high, the application of extreme ends of the flange bolts together.

6 Flange connection standard used GB4216.3-4216.5 standard, as with other standards, can be explained.

 

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping. Each vibration absorber is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. The absorbers are cleaned, dehydrated, sealed in plastic wrap and individually boxed after final inspection to maintain cleanliness and dryness prior to installation.

 

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Anti-Vibration Corrugated Tube

Spring Vibration Isolation for Ventilation Project

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Spring Vibration Isolation for Ventilation Project

Spring Vibration Isolation for Ventilation Project

 

Model: SVI-XG

Spring Vibration Isolation1

Production Description:

1 This suspending spring vibration isolator consists of columned large outer-diameter spring and other materials which can isolate  vibration and reduce noise.

2 It’s widely used to isolate vibration, reduce noise and buffer in suspending vibrators including small air-conditioner, air conduit, air pipe, and fan.

3 Suspending vibration isolator has a simple structure, with an obvious vibration isolating performance. So it is the ideal component for suspending vibrators to isolate vibration and reduce noise.

4 Application:small air conditioning unit, fans pipe, air pipe, fans.

Spring-Vibration-Isolation3

                                                                                                                                                                                          

Model: SVI-XG2

Spring Vibration Isolation

Product Description:
1)This suspending spring vibration isolator consists of columned large outer-diameter spring and other materials which can isolate vibration and reduce noise.
2) It’s widely used to isolate vibration, reduce noise and buffer in suspending vibrators including small air-conditioner, air conduit, air pipe, and fan. Suspending vibration isolator has a simple structure, with an obvious vibration isolating performance.
3) it is the ideal isolator.

SVI-XG2B

 

                                                                                                                                                                                    

Model: SVI-JKL

Spring Vibration Isolation

Product Description:
Type JKL series AVM is semi-enclosed structure which makes you see the running performance more clearly.The large ourter-diameter spring plays a better isolation effect.It could change free performing height of AVM by adjusting upper bolt.

SIV-JKL2

                                                                                                                                                                                  

Model: SVI-XT

Spring Vibration IsolationSVI-XT1

 

Product Description:

1)This suspending spring vibration isolator consists of columned large outer-diameter spring and other materials which can isolate vibration and reduce noise.

2) It’s widely used to isolate vibration, reduce noise and buffer in suspending vibrators including small air-conditioner, air conduit, air pipe, and fan. Suspending vibration isolator has a simple structure, with an obvious vibration isolating performance.

3) it is the ideal isolator.

SVI-XT1B

                                                                                                                                                                                    

Spring Vibration Isolation

Product Description:

1 This anti-vibration mount with small volume,beautiful outlook and easy installations is suited for
small load unit.It is the small anti-cut spring AVM currently.

 

SIV-JN2

 

Refrigeration Anti-Vibration Tube

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Anti-Vibration Tube

Refrigeration Anti-Vibration Tube

Refrigeration Anti-Vibration Tube

INTRODUCTION:

 Features
• Unique proven design for high pressure applications,
rated for R410A
• Compatible with all refrigerants
• Maximum working pressure: As per table listed below
• Working temperature: -40°F to 248°F (-40°C to 120°C)
• Deep pitch stainless steel flexible hose and high tensile
wire braid
• Stainless steel grooved ferrules and crimped ferrules
• Design includes a piston stopper that provides a more
positive seal and reduces leaks
• 100 % Helium and Hydrogen leak tested

Refrigeration-Anti-Vibratio

Item No.Connection(inch)Dimension(inch)Max working pressure(psig)Burst pressure(psig)
A(I.D.)B±1/8C±1/8D±1/4E±1/16
BVA-13/83/813/166-15/168-9/161/25002500
BVA-21/21/27/87-1/491/25002500
BVA-35/85/815/1689-7/811/165002500
BVA-43/43/41-1/48-1/1610-9/1611/165002500
BVA-57/87/81-7/169-1/81213/165002500
BVA-61-1/81-1/81-13/169-7/1613-1/1613/165002500
BVA-71-3/81-3/8211-1/215-9/167/85002500
BVA-81-5/81-5/82-1/412-3/816-7/815/165002500
BVA-92-1/82-1/82-3/415-3/1620-5/815/163901950
BVA-102-5/82-5/83-1/818-1/1624-5/161-1/43401700
BVA-113-1/83-1/83-7/162026-15/161-1/23001500
BVA-123-5/83-5/84-1/82432-3/161-9/16175525
BVA-134-1/84-1/84-7/162432-15/161-9/16175525

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping. Each vibration absorber is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. The absorbers are cleaned, dehydrated, sealed in plastic wrap and individually boxed after final inspection to maintain cleanliness and dryness prior to installation.

 

Home>>Air Condition Materials>>Air Condition Installation>>Vibration Dampers>> Refrigeration Vibration Tube