logo

Roll bond evaporator

now browsing by category

 

Roll bond evaporator

Roll bond evaporator

Item: Roll bond evaporator

Short Description: Roll bond evaporator is made with two aluminium panels special,using the technology of printing refrigerating gas route,heat and roll it,finally,using high pressed air to make out refrigerating gas route.As roll bond evaporator has excellent performance to transit heat energy,more and more refrigerators,freezors,icebox,winebox,mini-freezor are equiped with this kind of evaporator.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Roll bond evaporator
Models & Details for “Roll bond evaporator”

Smartclima can do:

* Max. length 2000mm,Max. width 1000mm;
* Double side rollbond, or one side rollbond and one side flat;
* Bend the panel;
* Spray powder .or no painting powder;
* Customize to manufacture panel according to your drawing.

Roll bond evaporator is made with two aluminium panels special,using the technology of printing refrigerating gas route,heat and roll it,finally,using high pressed air to make out refrigerating gas route.As roll bond evaporator has excellent performance to transit heat energy,more and more refrigerators,freezors,icebox,winebox,mini-freezor are equiped with this kind of evaporator.

Process for roll bond evaporator: preparing materials – Plates inputting – Washing & cleaning -Brushing – Plates Overlapping-Heating,including hot rolling and cold rolling – annealing – inflating/blowing up -Shearing/pressing/punching – folding and sharpening -adding the capillary – assemble welding – leakage testing -cleaning and drying – coating – inspection – packing.

Max.Dimension for roll bond evaporator: Different dimensions could be produced after agreement with our technical dep. Usually, max. length=1800mm and max.width=860mm.

Surface treatment for roll bond evaporator: No treatment or Powder coating;White or Black;Oxidizing.

The roll bond evaporator can be with Copper-Aluminium tube,can be with capillary,or can be without tube.

Structure:Double side roll bond evaporator;Single side roll bond evaporator;Part single side roll bond evaporator. The buyer need to tell us the dimension,thickness,with/witout tube or capillary,surface treatment,purchased quantity,and then we`ll offer you the best competitive price and quality roll bond evaporator.

Used for cooing system with R134a,R410a,R600,etc…Inner cleanness,and can be standed with high pressure to meet the requirement for refrigerant cooling system.As it has excellent performance to transit heat energy,more and more refrigerators,freezors,icebox,winebox,mini-freezor are equiped with roll bond evaporator.

roll-bond-evaporator-1a roll-bond-evaporator-1broll-bond-evaporator-2a

roll-bond-evaporator-2broll-bond-evaporator-3aroll-bond-evaporator-3b

roll-bond-evaporator-4a roll-bond-evaporator-4broll-bond-evaporator-5a

roll-bond-evaporator-5broll-bond-evaporator-6aroll-bond-evaporator-6b

roll-bond-evaporator-7a roll-bond-evaporator-7broll-bond-evaporator-8a

roll-bond-evaporator-8broll-bond-evaporator-9a roll-bond-evaporator-9b

roll-bond-evaporator-10a roll-bond-evaporator-10broll-bond-evaporator-11a

roll-bond-evaporator-11broll-bond-evaporator-12a roll-bond-evaporator-12b

roll-bond-evaporator-13a roll-bond-evaporator-14bRoll bond evaporator

*Customized Size is accepted

Buying Guide to “Roll bond evaporator”
  • Accept customized production;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • More types and sizes of  Roll bond evaporator are not displayed on the web.If the item above doesn`t meet your requirement,please contact us to email: [email protected] ,we can supply a favourite item you need.
General Knowledge on “Roll bond evaporator ”

Material for Roll Bond Evaporator

The brand code of aluminium material we used to make roll bond evaporator is Aluminium / Aluminum 1060 alloy.In this article,you can know about Aluminium / Aluminum 1060 alloy,which we are using.

Aluminium / Aluminum alloys are known for their strong corrosion resistance characteristics. These alloys are sensitive to high temperatures and experience an increase in strength at subzero temperatures. Aluminium / Aluminum alloys are good low-temperature alloys.

Aluminium / Aluminum 1060 alloy is a low strength and pure Aluminium / Aluminum alloy with good corrosion resistance characteristic.

The following datasheet provides an overview of Aluminium / Aluminum 1060 alloy.

Chemical Composition

The chemical composition of Aluminium / Aluminum 1060 alloy is outlined in the following table.

ElementContent (%)
Aluminium / Aluminum, Al99.60 (min)

Physical Properties

The following table shows the physical properties of Aluminium / Aluminum 1060 alloy.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point649°C1200°F

Max. length 2000mm,Max. width 1000mm;

Double side rollbond, or one side rollbond and one side flat;

Mechanical Properties

The mechanical properties of Aluminium / Aluminum 1060 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson’s ratio0.330.33

Thermal Properties

The thermal properties of Aluminium / Aluminum 1060 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23.6 (10-6/ºC)20-100
Thermal conductivity234 (W/mK)25H18

Other Designations

Equivalent materials to Aluminium / Aluminum 1060 alloy are:

ASTM B209ASTM B210ASTM B211ASTM B221
ASTM B241ASTM B345ASTM B361ASTM B404
ASTM B548SAE J454ASTM B483ASTM B234

Fabrication and Heat Treatment Hardening

Aluminium / Aluminum 1060 alloy can be hardened only from cold working. Tempers H18, H16, H14 and H12 are determined based on the amount of cold working imparted to this alloy.

Annealing

Aluminium / Aluminum 1060 alloy can be annealed at 343°C (650°F) and then cooled in air.

Cold Working

Aluminium / Aluminum 1060 has excellent cold working characteristics and conventional methods are used to readily cold work this alloy.

Welding

Standard commercial methods can be used for Aluminium / Aluminum 1060 alloy. The filter rod used in this welding process whenever needed should be of AL 1060. Good results can be obtained from the resistance welding process performed on this alloy through trial and error experimentation.

Forging

Aluminium / Aluminum 1060 alloy can be forged between 510 to 371°C (950 to 700°F).

Forming

Aluminium / Aluminum 1060 alloy can be formed in an excellent manner by hot or cold working with commercial techniques.

Machinability

Aluminium / Aluminum 1060 alloy is rated with fair to poor machinability, especially in the soft temper conditions. The machinability is much improved in the harder (cold worked) tempers. Usage of lubricants and either high-speed steel tooling or carbide are recommended for this alloy. Some of the cutting for this alloy can also be done dry.

Heat Treatment

Aluminium / Aluminum 1060 alloy does not harden by heat treatment and it can be annealed after the cold working process.

Hot Working

Aluminium / Aluminum 1060 alloy can be hot worked between 482 and 260°C (900 and 500°F).

Applications

Aluminium / Aluminum 1060 alloy is widely used in the manufacture of railroad tank cars and chemical equipment.

Below photos show you our facility to process roll bond evaporator.Quality can be assured.

Roll-Bond-Evaporator Factory Roll-Bond-Evaporator FactoryRoll-Bond-Evaporator Factory

Roll-Bond-Evaporator Factory Roll-Bond-Evaporator Factory Roll-Bond-Evaporator Factory

Roll-Bond-Evaporator factory Roll-Bond-Evaporator1aRoll-Bond-Evaporator Factory

Roll-Bond-Evaporator Factory Roll-Bond-Evaporator Factory Roll-Bond-Evaporator Factory

Roll-Bond-Evaporator1m Roll-Bond-Evaporator FactoryRoll-Bond-Evaporator Factory

We accept customized production for different dimension on your request.Just send us your drawing or tell us your requirment,we`ll quote to you immediately.

More Keywords: Refrigerator Evaporator, Freezer evaporator, Fridge evaporator, Refrigerant evaporator,Plate evaporator,Heat Exchanger

Home>>Refrigerating Parts & Heating Elements>>Heat Exchangers>> Roll bond evaporator