logo

All Equipments for Duct Cleaning

Air-Duct-Cleaning-Robot-GX-08-4

Standard Automatic Cleaning Robot,Model GX-08-4

It includes the rear and front infrared color camera with high-intensity lighting, of which the rolling brush can be lifted descended easily. With the driving device (caterpillar or 4 × 4 wheel), it will simultaneously move and rotate in the air duct and entirely loosen the dust and absorptive accumulated inside the air duct to prepare for the absorption by the dust absorbing robot (direct-dust-absorption method), or, the cleaning robot simultaneously move and loosen the dust and the special dust collector will concurrently absorb the dust from the other end of the air duct (raised-dust-absorption method). Whether the cleaning result meets the requirement can be observed from the monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Dimensions:480mm (Length) x 380mm (Width) x 160mm (Height)
Weight:13.5Kg
Voltage:24VDC; power: 235W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned:Rectangular or round duct made of metal and composite material
Range of cleaning:height 180mm -600mm (with lateral rolling brush or rotating brush) x width (no requirements), with dimension of Φ500mm or more
Brush control:point-position electrical control (automatic adjustable highest and lowest point limits)
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting: rear and front 420-line industrial color cameras, of which the front one has the capacity of 360°rotation horizontally and 180° pitching rotation, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)


GX-08-4B

Large-scale Automatic Cleaning Robot,Model GX-08-4B

It is a large automatic cleaning robot designed for large air duct in the height of 600mm – 1500mm. In order to save the cost of purchasing this machine for the customer, a mechanically-driven extending arm is added to the automatic cleaning robot in original standard to reach the cleaning height of 1500 mm. Other technical indicators of this machine are equivalent to the standard automatic cleaning machine. The customer only has to buy the mechanical extending arm in addition to the standard automatic cleaning machine

Dimensions:850mm (Length) X 380mm (Width) X 730mm (Height)
Weight:20.5Kg
Voltage:DC24V,power:375W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned:large rectangular or square ducts made of metal and composite material
Range of cleaning:height 600mm -1500mm (with lateral rolling brush or rotating brush) X width (no requirements)
Brush control:point-position electrical control (automatic adjustable highest and lowest point limits)
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial color cameras, of which the front one has the capacity of 360°rotation horizontally and 180°pitching rotation, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)


GX-08-5B

Module-type video sampling and shoveling robot,Model GX-08-5B

It includes the rear and front infrared color camera with high-intensity lighting, automatic jib-arm dust-collecting sampling unit, and the driving device (caterpillar or 4×4 wheel) for the robot to move in the air duct. The professionals may correctly differentiate the conditions inside the air duct by observing the inside of air duct and sampling the dust in the air duct and customize the solution of cleaning and sterilization. Use the special shoveling device to carry the heavy litter (such as bricks, large and small stones, and tools) can not be cleaned by other robots in the air duct to the air outlet (or manhole) and then the professionals remove the litter. Professionals will attain the monitoring video information about the inside of the air duct at any time and make the MP4 .

Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:10Kg
Voltage:24VDC; power:75W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color cameras, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)
Sampling method:mechanical jib-type dust-collecting sampling unit
Shoveling method and shoveling power:mechanical lever, horizontal thrust > 25Kg, vertical lift > 8Kg


GX-08-5D

Module-type Dust Absorbing Robot,Model GX-08-5D

The equipment is the special device used in the “direct-dust-absorption method”. It is provided with rear and front infrared color camera with high-intensity lighting, high-efficiency automatic lifting dust absorption head, and the driving device (caterpillar or 4×4 wheel) for the robot to simultaneously move and absorb all the litter loosen by the cleaning robot (air hammer or air whip) with the high-efficiency dust absorption head with the help of high-power vacuum dust collector. Whether the cleaning result meets the requirement can be observed from the monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration:
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:11.5Kg
Voltage:24VDC; power: 75W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Running method:4X4 wheel or dual-caterpillar driving Kinematics parameters:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color cameras, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)
Dust suction method:special equipment used for direct dust suction method.


GX-08-5C

Module-type Pulse Air Hammer and Air Whip Robot

The equipment is provided with the pulse air hammer and air whip device with special patent design and possessing the sudden explosive. With the driving device (caterpillar or 4×4 wheel), the robot moves in the air duct. The robot will loosen the dust in the air duct in a sudden and get prepared for the dust absorbing robot to absorb the dust (direct-dust-absorption method) or for the special dust cleaner on the other end of the air duct to absorb the dust while loosening the dust (raised-dust absorption method). Whether the cleaning result meets the requirement can be observed from the monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration:
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:11Kg
Voltage:24VDC; power: 90W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Cleaning method:rotating pulse air hammer and rotating air whip
Operating air pressure:0.6MPa-1.2Mpa
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color cameras, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)


GX-08-5E

Module-type Spraying and Sterilizing Robot,Model GX-08-5E

It is provided with rear and front infrared color camera with high-intensity lighting. The 360°rotational sprinkling unit ensures that the detergent will reach any point of the air duct. After the dust absorption is completed, the driving device (caterpillar or 4×4 wheel) is used for the robot to simultaneously move and spray the special detergent for cleaning and sterilization. Whether the cleaning result meets the equirement can be observed from the monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration:
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:10Kg
Voltage:24VDC; power: 90W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Sterilizing method:Use rotating ultrasonic atomization spraying method and the “direct spraying contract method” popular in the world
UV sterilization:High-intensity UV bactericidal lamp (optional) with germicidal efficiency of 98% – 100%
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color cameras, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)


 

4-in-1-robotFour in One Cleaning Robot with function:Video sampling and shoveling,Air Hammer,Dust Absorbing,Spraying and Sterilizing

By replacing different module to reach the target of Video sampling and shoveling,Air Hammer,Dust Absorbing,Spraying and Sterilizing

 

 

 

 

 

 

 


4-in-1-chassis

Chassis for four in One Cleaning Robot

Including front and back two color infrared camera (and with bright lighting)
Walking speed: 0 to 12 m / min,stepless
Operating voltage: 24V (DC)
Tracked or wheeled driving

 

 

 

 

 

 


GX-08-1

Duct Cleaning Robot Controller,Model GX-08-1

With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment

Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Weight:14Kg
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
Power: 150W
More Details:
(1)10.4′high-definition LCD,synchronous monitoring and recording system,Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2)Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
Optional:
(1)Four-wheel moving synchronous system of robot and the turning differential system.
(2)Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3)Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4)Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.

GX-08-2

Central air-conditioning duct video detection robot,Type A

crawler Equipped with automatic horizontal rotation of 360 degrees / pitching 200 degree rotating color high-definition camera (with strong lighting), by a transmission device (double track drive) in the wind pipe walking. Through the observation of the wind pipe, for professional judge the wind pipe cleaning and disinfection, tailored solutions, and obtain the wind pipe internal any time video storage data and produce standard MP4.

Robot size: 230mm (L) × 150mm (W) × 110mm (H)
Weight: 4Kg, power: 120W
The control box size: 350mm (L) × 170mm (W) × 200mm (H) hand manipulation
Weight: 2Kg
Input voltage: AC220V, the robot working voltage: DC24V or DC12V
Stroke: standard with 20 meters (Xian Lan), according to requirements can be arbitrarily extended to 100 meters.
Movement: double track drive; rotating radius: zero radius (in situ rotated 360 °)
Motion parameters: >45mm >40 ° climbing, climbing
Speed: 0–12 M / min (stepless)
Camera: 520 lines of industrial grade color camera, automatic level of 360 ° / pitching rotation of 200 degrees
Lighting: 2*3W light type light LED lighting (low temperature long life LED source)
Video storage: the 500G hard disk storage, the longest continuous recording time of 3 months
Display mode: hand 7 inches wide proportion of high-definition LCD display screen
Image editing: monitoring and video capture function, the function of real time image edit cut more than 30
Image: U disk or removable hard disk is convenient


Central-Central air-conditioning duct intelligent quantitative sampling robot

Air-conditioning duct intelligent quantitative sampling robot

crawler Equipped with automatic horizontal rotation of 360 degrees / pitching 200 degree rotating color high-definition camera (with strong lighting), with the help of video monitoring system to obtain the wind pipe inside any time video storage data and produce standard MP4, for professional judge the situation of the wind pipe. At the same time, “one click” start intelligent control program operation quantitative sampling system, micro power unit in the closed condition, using the quantitative system for dust and microorganism in closed form collection (mining set using standard multiple modulus design, accurate metering), special design of micro power device can ensure that the collected dust region be completely collected. In order to ensure the aseptic operation of filter and the sampling head are disposable items, while providing cleaning and scraping two acquisition mode. The transmission device in the wind pipe walking by, can be in wind pipe of an arbitrary point in the acquisition work, is the professional testing unit ideal equipment.

Robot size: 320mm (L) × 210 mm (W) × 120 mm (H)
Weight: 11 Kg, power: 230W
The control box size: 470mm (L) × 370 mm (W) × 200mm (H) hand manipulation
Weight: 10Kg
Input voltage: AC220V, the robot working voltage: DC24V or DC12V
Stroke: standard with 20 meters (Xian Lan), according to requirements can be arbitrarily extended to 100 meters
Movement: closed double track drive (can prevent contamination)
The radius of rotation: zero radius (in situ rotated 360 °)
Performance: >45mm >40 ° climbing, climbing
Speed: 0–12 M / min (stepless)
Camera: 520 lines of industrial grade color camera, automatic level of 360 ° / pitching rotation of 200 degrees
Lighting: 2*3W light type light LED lighting (low temperature long life LED source)
Video storage: the 500G hard disk storage, the longest continuous recording time of 3 months
Image editing: monitoring and video capture function, the function of real time image edit cut more than 30
Image: U disk or removable hard disk is convenient
Sampling method: full sealed miniature scraping swab and wipe two sampling methods to choose
Sampling time: 35 s (can be adjusted according to requirements)
Sampling method: “one key” button, the operation is simple and convenient
Sampling precision:
(1) the dust sampling error: < 5%
(2) bacteria, microbial sampling error: < 5%
(3) particulate filtration efficiency ≥ 0.3mm: 99.97%
(4) all the total sampling error rate: 3%


 

Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)Common Flexible-Shaft Air Duct Cleaner (Tornado Cleaning System)

For those ventilation ducts such as round flexible conduit, round and square ducts, the special flexible-shaft cleaner will be available for cleaning the round and square duct with different specifications by replacing the brush with different diameter. The specific adapter is reserved in the front end of flexible shaft to connect with the dust collector. Use the robot with the special high-pressure dust collector may fulfill the function of cleaning and dust absorption for the above-mentioned air ducts (direct-dust-absorption method) (tornado cleaning system). When the end of the flexible shaft is moving in the air duct, it will concurrently pound the air duct to loosen the dust accumulated, and the dust is absorbed from the other end of the air duct simultaneously by the specific dust collector (raised-dust-absorption method).

Technical Data and Standard Configuration:
Dimensions:500mm (Length) X 380mm (Width) X 460mm (Height)
Weight:35Kg
Voltage:220VAC/50Hz, power: 750W
Types and material of air duct to be cleaned:Rectangular or square ducts made of metal and composite material
Cleaning length:15 meters (equipped with flexible shaft or semi-hard shaft), length can be increased or decreased according to requirements
Cleaning mode:Rotate the cleaning shaft left or right for option
Rotation speed of brush:850R.PM, cleaning torque: >3N.m
Cleaning method:Raised-dust suction method or direct dust suction method (tornado cleaning system, with maximum vacuum is up to 20000 Pa)
Range of cleaning:Height 100-500mm X Width 100-1500mm, with diameter ofΦ100–Φ500
Optional:
(a) Complete set of synchronous monitoring and recording system
(b) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp


 

Intelligent Flexible-Shaft Air Duct CleanerIntelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

The unit adopts the intellectual control technology combing the computer SCM and frequency converter, which features most highly completed performance in the domestic market. It is a typical and standard configuration for the flexible-shaft-cleaning method. Based on the servo function of the computer, the brush may automatically reciprocate to clean the rectangular air duct with different specification in horizontal direction. Meanwhile, the brush may move in the air duct in axial direction. In addition to the automatic horizontal function, the unit also has the function of independent left-rotating and right-rotating used to clean the round and square air duct with different specification. The specific adapter is reserved in the front end of flexible shaft to connect with the dust collector. Use the robot with the special high-pressure dust collector may fulfill the function of cleaning and dust absorption for the above-mentioned air ducts (direct-dust-absorption method) (tornado cleaning system). When the end of the flexible shaft is moving in the air duct, it will concurrently pound the air duct to loosen the dust accumulated, and the dust is absorbed from the other end of the air duct simultaneously by the specific dust collector (raised-dust-absorption method). Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration:
Dimensions:500mm (Length) X 380mm (Width) X 460mm (Height)
Weight:37Kg
Voltage:220VAC/50Hz, power: 850W
Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Cleaning length:15 meters (equipped with flexible shaft or semi-hard shaft),length can be increased or decreased according to requirements
Cleaning mode:Rotate the cleaning shaft left or right, automatic horizontal reciprocating rotation, and stepless speed regulation modes for option
Rotation speed of brush:350-1400R.PM, cleaning torque: >3N.m
Cleaning method:raised-dust suction method or direct dust suction method (tornado cleaning system, with maximum vacuum is up to 20000 Pa)
Range of cleaning:Height 100-500mm X Width 100-2000mm, with diameter ofΦ100–Φ500
Video recording system:complete set of intelligent synchronous monitoring and recording system, video in standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more
Optional:Complete set of rotational and spraying sterilizer and high-intensity UV actericidal lamp


Air blade cleaning method for Water ChillerAir blade cleaning method for Water Chiller

The core technology of the air blade is that the compressed air of 0.6MPa-1.2MPa generated by the compressor passes through the compressed air hose and is delivered to the interior air duct to be cleaned. Select the nozzles of different types at the end of air hose and loosen the dust on the interior wall of air duct thoroughly by brushing onwards, brushing backwards, and central brushing. Meanwhile, absorb the loosened dust completely by high-power dust collector. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data:
Types and material of air duct to be cleaned:large rectangular or square ducts made of metal and composite material
Operating air pressure:0.6Mpa -1.2Mpa
Range of cleaning:height 30-2000mm X width 30-2000mm, with diameter of Φ30—Φ2000
Standard:
(1) 6 quick-connect rigid air levers and 12 quick-connect flexible air levers
(2) One standard front spraying nozzle, one rear spraying nozzle, and one middle spraying nozzle
(3) Standard front spraying vibration whip, rear spraying vibration whip, and standard vibration whip
(4) A manual gun-type control valve and two reels of high-pressure air connecting hose
(5) A combined support used for large air duct cleaning (including the combined support used for the camera)
Optional:
(1) Complete set of synchronous monitoring and recording system
(2) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp


 Vibration Whip Cleaning Method for Water Chiller Vibration Whip Cleaning Method for Water Chiller

The working principle of vibration whip is basically similar to that of air blade. The nozzle is not adopted at the front end. The customized hoses in different lengths under the compressed air are used to loosen the dust on the interior wall of air duct through high-speed and intensive whipping and compressed air brushing. At the same time, the high-power dust collector absorbs the loosen dust completely. It is particularly effective for cleaning flat air ducts with small-diameter, flat, and super ducts. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

 

Technical Data:
Types and material of air duct to be cleaned:large rectangular or square ducts made of metal and composite material
Operating air pressure:0.6Mpa -1.2Mpa
Range of cleaning: height 30-2000mm X width 30-2000mm, with diameter of Φ30—Φ2000 Standard:
(1) 6 quick-connect rigid air levers and 12 quick-connect flexible air levers
(2) One standard front spraying nozzle, one rear spraying nozzle, and one middle spraying nozzle
(3) Standard front spraying vibration whip, rear spraying vibration whip, and standard vibration whip
(4) A manual gun-type control valve and two reels of high-pressure air connecting hose
(5) A combined support used for large air duct cleaning (including the combined support used for the camera)
Optional:
(1) Complete set of synchronous monitoring and recording system
(2) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp


GX-08-13B4000M3/H Vacuum Dust Collector

This unit is provided with a special high-speed blower. The dust-absorption modes are “raised-dust-absorption” and “direct-dust-absorption method”. The dust-absorption distance is up to thirty meters. The power supply is 220VAC/50Hz, which features convenient operation, small dimensions, and light weight, with multi electrical protection. The equipment is provided with power indication, fan working indication, and voltage of control power supply, current for the working fan, filter resistance alarming, overload protection for fan current, overheating protection, and protection against current leakage. The 3-stage filtering efficiency: the filtering efficiency may be over 99.7% for the particles that is not less than 0.3mm. Concentration of emission: Concentration of PM10 particles in the exhaust air shall not be more than 0.15mg/m3.

Technical Data and Standard Configuration:
Dimensions:1080mm (Length) X 430mm (Width) X 930 (Height)
Weight: 48Kg
Voltage:220VAC/50Hz, power: 4000W
Dust suction mode:“Raised-dust suction method” and “direct dust suction method” for option
Maximum vacuum::650Pa for “raised-dust suction method” and 20000Pa for “direct dust suction method”
Filter efficiency:3-stage filtering efficiency: the filtering efficiency may be over 99.7% for the particles that is not less than 0.3mm
Concentration of emission: content of PM10 particles in the exhaust air shall not be more than 0.15mg/m3
Display and protection:The equipment is provided with power indication, fan running indication, and units for controlling the voltage, current for the working fan, filter resistance alarming, overload protection for fan current, overheat protection, and protection against current leakage.
Accessory
The flexible soft pipe is included.


 

GX-08-13C8000M3/H Vacuum Dust Collector

This unit is provided with a special blower. The dust-absorption mode is the raised-dust-absorption. The power supply is 380VAC/50Hz, which features strong wind and low noise, with multi electrical protection. The equipment is provided with power indication, fan working indication, and voltage of control power supply, current for the working fan, filter resistance alarming, overload protection for fan current, overheat protection, and protection against current leakage. The 3-stage filtering efficiency: the filtering efficiency may be over 99.7% for the particles that is not less than 0.3mm. Concentration of emission: Concentration of PM10 particles in the exhaust air shall not be more than 0.15mg/m3.

Technical Data and Standard Configuration:
Dimensions:2150mm (Length) X 740mm (Width) X 1130 (Height) (Separable length: 1000mm for fan section, 600mm for filter section, and 550mm for suction port section)
Weight:185Kg
Voltage:AC380V/50Hz, power: 4000W
Dust suction mode:raised-dust suction method
Maximum vacuum:850Pa for raised-dust suction method
Filter efficiency:3-stage filtering efficiency: the filtering efficiency may be over 99.7% for the particles that is not less than 0.3mm
Concentration of emission:content of PM10 particles in the exhaust air shall not be more than 0.15mg/m3
Display and protection:The equipment is provided with power indication, fan running indication, and units for controlling the voltage, current for the working fan, filter resistance alarming, overload protection for fan current, overheating protection, and protection against current leakage.
Accessory
The flexible soft pipe is included.


Multi-functional Automatic Spraying and Sterilizing Pump Series for Water Chiller CleaningMulti-functional Automatic Spraying and Sterilizing Pump Series for Water Chiller Cleaning

The automatic ultra-fine atomization spraying pump is specially designed. Different modules are equipped to provide functions for using with different equipment and make a multi-purpose machine.

Dimensions: 380mm (Length) X 250mm (Width) X 220mm (Height)
Weight:9Kg
Voltage:220VAC/50Hz, power: 150W
Maximum pressure:1.0MPa
Maximum suction stroke:5m
Maximum flow:1.8L/min
(1) As a supporting equipment for the automatic robot.
(2) As a supporting equipment for common and intelligent flexible-shaft air duct cleaning machine.
(3) As a supporting equipment for air blade and vibration whip.
(4) As a supporting equipment for semi-automatic cleaning robot and micro unit.


Air-Duct-Inspection-DeviceAir Duct Detection Device

Air Duct Detection Device is usually used to detect internal duct situation,to check duct is dirty or not,to check duct is crack or not,to detect air temperature,wind speed,and so on……

  • Device includes: infrared thermometer, duct detector, wind thermometer
  • TFT-LCD with a resolution of 3.5%, screen 960 * 240;
  •  Support for multiple languages ​​menu, simple operation;
  •  Camera and cables can be waterproof;
  •  Supports wired and wireless transmission;
  •  Display can be video and take photos;
  • SD card capacity reach up to 16G;
  • Supports wireless video transmission,
  •  Wire can be lengthened,
  • Support TF card with photographs,with video and other functions.
  • High definition, easy to operate, support to work for multiple display devices, combined with the wind speed testing and temperature testing, field testing of a portable device.

 


 

 

 all-in-one-without-videoAll in one Air Duct Cleaning Equipments,with function of Cleaning And Suction,without video monitor

This  Air Duct Cleaning Equipment is standard version in the field of air duct cleaning equipments.Usually,you need two device for basically clear air duct:one is cleaning device and the other is duct suction device. In this Universal Air Duct Cleaning Equipment,combines two basic function:cleaning and suction. Use softpipe into the air duct,the brush will rotate and thus to clear the dust,and at the same time,the pipe will suct the dust into the collection bucket.

Voltage:  220V
Power:  3370W
Dust capacity:  60L
Vacuum suction:  270mbar
Airflow:  120L/S
Brush rotating speed:  0-150r/min
Noise:  60dB
Dimension:  480x450x1050mm
Weight:  45kg
Working temperature:  -10℃ to  50℃
Suction pipe diameter:  Φ50mm,long 10m / 15m
Brush diameter:  Φ150,Φ220,Φ320,Φ400


 

Rotobrush air duct cleaning machine

Duct Cleaning robot for circular pipe and rectangle duct

Brief Description: A revolutionary duct cleaning equipment which can clean circular duct and rectangle duct with a same system. Using rotary brush to clean circular air pipes,and use scrolling brush or scrubing brush to clean rectangle type ventilation ducts .The brush height can be lifted by the adjustale bracket.One controller+One Robot+Three typs brushes,composing a best assistant to clean air ducts!

  • Solid and strong design, high cleaning efficiency;
  • Automatic lifting design,lifting precision movements;
  • With a multi-size brushes for different diameter ducts;
  • The latest high-definition infrared camera, clearer and more realistic;
  • The latest great-power cleaning motor, more powerful cleaning dirt capacity;
  • 360° rotation brush, thoroughly clean every side;
  • The latest great-power driving motor, more powerful;
  • Adjustable traveling speed,mastering move speed;

Duct Type: Circular duct or Rectangle,Square duct,350mm≤duct height≤1000mm.

 


All-in-one Duct Cleaning Equipment with VideoAll In One Air Duct Cleaning Equipments,With Cleaning Robot,With Video

*Multi-function in one unit.One unit with function of  clearing duct,sucking dust,video monitor monitoring,all in one;
*Works for most of rectangular ducts.Suit for rectangular duct between min. height 150mm and max.height 800mm.The height of clearing pole can be adjusted;
*Low price.Save 50% cost,compared other equipments which has clearing duct,sucking dust,video monitor monitoring seperatly;
*Simple operation.Anyone can operate easily;
*No need to put gas block in the duct when clearing duct;
*High working effience.One man can clear 300㎡ per day;
*Help you to make money. With this machine,clearing duct becomes so easy,you will become a professional worker to clear duct,help you to earn money.

 

 

 

 


Air Duct Cleaning Robot-Height AdjustableFor round duct cleaning-Air Duct Cleaning Robot-Height Adjustable

Air Duct Cleaning Robot-Height Adjustable can work for different duct diameters. It adopts patented design self-elevating platform, lifting various height for cleaning duct from 250mm to 1000mm. Excellent cleaning performance with big power motor with various sizes of cleaning head. Manipulation is simple, easy steadily, with infrared and high-definition video, photography and computer operating systems, working video available SD (32G) card storage.

Weight: 17.6kg
Dimensions (excluding round brush): 400x300x250mm
Power: 70W
Walking speed: 11.12m/min
Working distance: ≤ 40m (cable length can be increased to 50m)
Cleaning diameter :250-1000mm
Load capacity: 150kg
Climbing ability: 40 degrees
Cleaning efficiency :200-1000 ㎡ / h

Portable Controller
Weight: 10kg
Dimensions: 460x340x160mm
Power: 350W
Control cable length: 20m


 

Rectangle Duct Cleaning Robot-height Adjustable

Rectangle Duct Cleaning Robot-height Adjustable,with Video function

  • Solid and strong design, high cleaning efficiency;
  • Automatic lifting design,lifting precision movements;
  • With a multi-size brushes for different diameter ducts;
  • The latest high-definition infrared camera, clearer and more realistic;
  • The latest great-power cleaning motor, more powerful cleaning dirt capacity;
  • 360° rotation brush, thoroughly clean every side;
  • The latest great-power driving motor, more powerful;
  • Adjustable traveling speed,mastering move speed;

Duct Type: Rectangle Duct,350mm≤duct height≤1000mm.

 

 

 

 


 

duct Cleaning robot for circular duct and rectangle duct

Duct Cleaning robot for circular pipe and rectangle duct

Brief Description: A revolutionary duct cleaning equipment which can clean circular duct and rectangle duct with a same system. Using rotary brush to clean circular air pipes,and use scrolling brush or scrubing brush to clean rectangle type ventilation ducts .The brush height can be lifted by the adjustale bracket.One controller+One Robot+Three typs brushes,composing a best assistant to clean air ducts!

  • Solid and strong design, high cleaning efficiency;
  • Automatic lifting design,lifting precision movements;
  • With a multi-size brushes for different diameter ducts;
  • The latest high-definition infrared camera, clearer and more realistic;
  • The latest great-power cleaning motor, more powerful cleaning dirt capacity;
  • 360° rotation brush, thoroughly clean every side;
  • The latest great-power driving motor, more powerful;
  • Adjustable traveling speed,mastering move speed;

Duct Type: Circular duct or Rectangle,Square duct,350mm≤duct height≤1000mm.

 

 

 


Leave a Reply

Your email address will not be published. Required fields are marked *